No sound while playing an audio file!

Hi! First, a few questions :)

Are you on a desktop or a laptop?
Have you been able to play music from CDs before?
Can you hear other sounds from your headphones/speakers besides CD Audio?

If it's a desktop, it could be that there's no audio connection going from the CD drive to the sound card. I'm not sure if I saw an option somewhere to use the IDE bus to stream music from the CD player. (I'd have to wait for someone else's opinion on that.)

The only other thing that I could think of is that the CD-In volume is turned down (Double-click on the volume icon on your panel, and make sure the volumes aren't at 0 or muted)

1. I'm on a desktop
2. I also have windows on my computer...and there everything is working fine!

I've checked the volume-control, and it's set on maximum level.

Thank's for helping out!

ım sory because ı m bad english.but ı love lunix but ı m no lunix pls give me
my e mail adress <email address hidden> now thanks

One last question, can you hear any other sounds in Ubuntu? For example, when you log in, there is a short musical clip.

This will help determine whether it is the CD sound settings or the sound settings in general.

No, there is no sound when I log in, so I guess there is a problem with the sound settings in general...
anyway, I've no idea how to fix this!?

i also have a laptop (acer Aspire 3500). I can hear sound, but very "light" and the soud is normal under .... another OS. My sound card is a Realtek AC97 (SIS7012). I don't know why i have this probem, but some friends of my have the same problem with a laptop.
If you have more information, my e-mail : <email address hidden> (Belgium)

What happens if you try to adjust the volume with alsamixer?
In a terminal run:
alsamixer
Try to move the CD and Master volumes and verify that you can hear anything.
Also plz also run the command (in a terminal as well)
ps -ef | grep esd
Then post the output.

when I run alsamixer the different volume settings says [off]!

Does anyone know how to fix this?

Interesting, for every volume control hit the letter m (lowercase) if you are still unable to hear anything please provide me the output of the following commands:

sudo lspci
sudo dmesg
sudo lsmod
sudo cat /proc/asound/cards
sudo /etc/init.d/alsa reload

Also note that there is a bug report specifically for your card SIS7012, look at bug id #5844

I still cant hear anything!
Here comes the output of the comands. There are a lot of lines though!

sudo lspci:
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)0000:00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller0000:00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
0000:00:05.0 IDE interface: Silicon Integrated Systems [SiS]: Unknown device 0180 (rev 01)
0000:00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
0000:00:09.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661FX/M661FX/M661MX/741/M741/760/M760 PCI/AGP

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
sudo dmesg:
global_irq 9 dfl dfl)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 0df00000 (gap: 0df00000:f0d00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[4294667.296000] Detected 1599.545 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.534000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)[4294670.534000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[4294670.538000] Memory: 217860k/228224k available (1416k kernel code, 9828k reserved, 762k data, 224k init, 0k highmem)
[4294670.538000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.538000] Calibrating delay loop... 3178.49 BogoMIPS (lpj=1589248)
[4294670.562000] Security Framework v1.0.0 initialized
[4294670.562000] SELinux: Disabled at boot.
[4294670.562000] Mount-cache hash table entries: 512
[4294670.562000] CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[4294670.562000] CPU: After vendor identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
[4294670.562000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294670.562000] CPU: L2 Cache: 256K (64 bytes/line)
[4294670.562000] CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000010 00000001 00000000 00000001
[4294670.562000] CPU: AMD Sempron(tm) Processor 2800+ stepping 02
[4294670.562000] Enabling fast FPU save and restore... done.
[4294670.562000] Enabling unmasked SIMD FPU exception support... done.
[4294670.562000] Checking 'hlt' instruction... OK.
[4294670.566000] Checking for popad bug... OK.
[4294670.566000] checking if image is initramfs... it is
[4294671.047000] Freeing initrd memory: 5165k freed
[4294671.052000] ACPI: Looking for DSDT in initrd... not found!
[4294671.108000] not found!
[4294671.116000] ENABLING IO-APIC IRQs
[4294671.116000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294671.227000] NET: Registered protocol family 16
[4294671.227000] EISA bus registered
[4294671.227000] ACPI: bus type pci registered
[4294671.237000] PCI: PCI BIOS revision 2.10 entry at 0xfa6c0, last bus=1
[4294671.237000] PCI: Using configuration type 1
[4294671.237000] mtrr: v2.0 (20020519)
[4294671.238000] ACPI: Subsystem revision 20050729
[4294671.248000] ACPI: Interpreter enabled
[4294671.248000] ACPI: Using IOAPIC for interrupt routing
[4294671.248000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.248000] PCI: Probing PCI hardware (bus 00)
[4294671.248000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294671.248000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294671.251000] Boot video device is 0000:01:00.0
[4294671.286000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.287000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[4294671.287000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[4294671.288000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[4294671.288000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[4294671.288000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[4294671.288000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[4294671.289000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[4294671.289000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[4294671.292000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.292000] pnp: PnP ACPI init
[4294671.295000] pnp: PnP ACPI: found 11 devices
[4294671.295000] PnPBIOS: Disabled by ACPI PNP
[4294671.295000] PCI: Using ACPI for IRQ routing
[4294671.295000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294671.302000] audit: initializing netlink socket (disabled)
[4294671.302000] audit: initialized
[4294671.302000] VFS: Disk quotas dquot_6.5.1
[4294671.302000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.302000] devfs: 2004-01-31 Richard Gooch (<email address hidden>)
[4294671.302000] devfs: boot_options: 0x0
[4294671.302000] Initializing Cryptographic API
[4294671.303000] isapnp: Scanning for PnP cards...
[4294671.656000] isapnp: No Plug & Play device found
[4294671.671000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294671.671000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294672.198000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.198000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.198000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294672.198000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.198000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.200000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.200000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.200000] io scheduler noop registered
[4294672.200000] io scheduler anticipatory registered
[4294672.200000] io scheduler deadline registered
[4294672.200000] io scheduler cfq registered
[4294672.201000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294672.201000] EISA: Probing bus 0 at eisa.0
[4294672.201000] Cannot allocate resource for EISA slot 1
[4294672.201000] Cannot allocate resource for EISA slot 4
[4294672.201000] EISA: Detected 0 cards.
[4294672.201000] NET: Registered protocol family 2
[4294672.210000] IP: routing cache hash table of 2048 buckets, 16Kbytes
[4294672.210000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[4294672.210000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[4294672.210000] TCP: Hash tables configured (established 8192 bind 8192)
[4294672.210000] NET: Registered protocol family 8
[4294672.210000] NET: Registered protocol family 20
[4294672.210000] ACPI wakeup devices:
[4294672.210000] PCI0 USB0 USB1 USB2 USB3 MAC0 AMR0 UAR1 UAR2 PS2K
[4294672.210000] ACPI: (supports S0 S3 S4 S5)
[4294672.210000] Freeing unused kernel memory: 224k freed
[4294672.246000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294672.249000] vga16fb: initializing
[4294672.249000] vga16fb: mapped to 0xc00a0000
[4294672.326000] Console: switching to colour frame buffer device 80x30
[4294672.326000] fb0: VGA16 VGA frame buffer device
[4294673.394000] Capability LSM initialized
[4294673.407000] NET: Registered protocol family 1
[4294673.422000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294673.422000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294673.422000] ACPI: bus type ide registered
[4294673.440000] SCSI subsystem initialized
[4294673.441000] libata version 1.11 loaded.
[4294673.442000] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[4294673.442000] ata1: SATA max UDMA/133 cmd 0xE900 ctl 0xEA02 bmdma 0xED00 irq 17
[4294673.442000] ata2: SATA max UDMA/133 cmd 0xEB00 ctl 0xEC02 bmdma 0xED08 irq 17
[4294673.643000] ata1: no device found (phy stat 00000000)
[4294673.643000] scsi0 : sata_sis
[4294673.844000] ata2: no device found (phy stat 00000000)
[4294673.844000] scsi1 : sata_sis
[4294673.849000] SIS5513: IDE controller at PCI slot 0000:00:02.5
[4294673.849000] SIS5513: chipset revision 1
[4294673.849000] SIS5513: not 100% native mode: will probe irqs later
[4294673.849000] SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
[4294673.849000] ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
[4294673.849000] ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
[4294673.849000] Probing IDE interface ide0...
[4294674.113000] hda: ST3160812A, ATA DISK drive
[4294674.725000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.725000] Probing IDE interface ide1...
[4294675.397000] hdc: TSSTcorpCD-R/RW SH-R522C, ATAPI CD/DVD-ROM drive
[4294676.111000] hdd: DVD-ROM DDU1621, ATAPI CD/DVD-ROM drive
[4294676.162000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.162000] Probing IDE interface ide2...
[4294676.675000] Probing IDE interface ide3...
[4294677.187000] Probing IDE interface ide4...
[4294677.699000] Probing IDE interface ide5...
[4294678.214000] hda: max request size: 1024KiB
[4294678.250000] hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
[4294678.274000] hda: cache flushes supported
[4294678.274000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
[4294678.333000] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
[4294678.333000] Uniform CD-ROM driver Revision: 3.20
[4294678.335000] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
[4294678.651000] Attempting manual resume
[4294678.651000] swsusp: Suspend partition has wrong signature?
[4294678.719000] usbcore: registered new driver usbfs
[4294678.719000] usbcore: registered new driver hub
[4294678.720000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[4294678.720000] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[4294678.720000] ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller
[4294678.743000] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[4294678.743000] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe8124000
[4294678.796000] hub 1-0:1.0: USB hub found
[4294678.796000] hub 1-0:1.0: 3 ports detected
[4294678.799000] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
[4294678.799000] ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
[4294678.811000] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[4294678.811000] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe8120000
[4294678.864000] hub 2-0:1.0: USB hub found
[4294678.864000] hub 2-0:1.0: 3 ports detected
[4294678.867000] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
[4294678.867000] ohci_hcd 0000:00:03.2: Silicon Integrated Systems [SiS] USB 1.0 Controller (#3)
[4294678.879000] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[4294678.879000] ohci_hcd 0000:00:03.2: irq 22, io mem 0xe8121000
[4294678.932000] hub 3-0:1.0: USB hub found
[4294678.932000] hub 3-0:1.0: 2 ports detected
[4294678.969000] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[4294678.969000] ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller
[4294678.969000] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[4294678.969000] ehci_hcd 0000:00:03.3: irq 23, io mem 0xe8122000
[4294678.969000] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[4294678.969000] ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
[4294678.969000] hub 4-0:1.0: USB hub found
[4294678.969000] hub 4-0:1.0: 8 ports detected
[4294679.003000] sis900.c: v1.08.08 Jan. 22 2005
[4294679.003000] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
[4294679.004000] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[4294679.014000] 0000:00:04.0: Using transceiver found at address 1 as default
[4294679.014000] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:01:6c:e2:c5:0b.
[4294679.579000] usb 1-2: new low speed USB device using ohci_hcd and address 3
[4294679.866000] usb 2-1: new low speed USB device using ohci_hcd and address 2
[4294681.128000] usbcore: registered new driver hiddev
[4294681.138000] input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:03.0-2
[4294681.153000] input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:03.0-2
[4294681.162000] input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:03.1-1
[4294681.162000] usbcore: registered new driver usbhid
[4294681.162000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294681.575000] ACPI: Fan [FAN] (on)
[4294681.579000] ACPI: CPU0 (power states: C1[C1])
[4294681.580000] ACPI: Thermal Zone [THRM] (36 C)
[4294681.670000] Attempting manual resume
[4294681.670000] swsusp: Suspend partition has wrong signature?
[4294681.677000] EXT3-fs: INFO: recovery required on readonly filesystem.
[4294681.677000] EXT3-fs: write access will be enabled during recovery.
[4294685.291000] kjournald starting. Commit interval 5 seconds
[4294685.291000] EXT3-fs: recovery complete.
[4294685.307000] EXT3-fs: mounted filesystem with ordered data mode.
[4294686.451000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294689.318000] Adding 650592k swap on /dev/hda5. Priority:-1 extents:1
[4294689.498000] EXT3 FS on hda2, internal journal
[4294693.889000] parport: PnPBIOS parport detected.
[4294693.889000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294693.976000] lp0: using parport0 (interrupt-driven).
[4294694.014000] mice: PS/2 mouse device common for all mice
[4294696.645000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: <email address hidden>
[4294697.123000] cdrom: open failed.
[4294697.124000] cdrom: open failed.
[4294697.782000] NTFS driver 2.1.22 [Flags: R/O MODULE].
[4294697.859000] NTFS volume version 3.1.
[4294698.965000] Linux agpgart interface v0.101 (c) Dave Jones
[4294698.973000] agpgart: Detected SiS 760 chipset
[4294698.989000] agpgart: AGP aperture is 4M @ 0xd8000000
[4294699.068000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294699.073000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294699.073000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294699.341000] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[4294699.653000] intel8x0_measure_ac97_clock: measured 49673 usecs
[4294699.653000] intel8x0: clocking to 48000
[4294700.264000] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 19 (level, low) -> IRQ 19
[4294700.934000] gameport: EMU10K1 is pci0000:00:09.1/gameport0, io 0xef00, speed 1193kHz
[4294703.172000] Real Time Clock Driver v1.12
[4294703.264000] input: PC Speaker
[4294703.364000] FDC 0 is a post-1991 82077
[4294703.697000] ts: Compaq touchscreen protocol output
[4294704.296000] NET: Registered protocol family 17
[4294706.286000] eth0: Media Link On 100mbps full-duplex
[4294708.659000] NET: Registered protocol family 10
[4294708.659000] Disabled Privacy Extensions on device c02eb280(lo)
[4294708.659000] IPv6 over IPv4 tunneling driver
[4294709.509000] ACPI: Power Button (FF) [PWRF]
[4294709.509000] ACPI: Power Button (CM) [PWRB]
[4294709.614000] ibm_acpi: ec object not found
[4294716.264000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294716.264000] apm: overridden by ACPI.
[4294717.947000] powernow-k8: Power state transitions not supported
[4294718.188000] Bluetooth: Core ver 2.7
[4294718.188000] NET: Registered protocol family 31
[4294718.188000] Bluetooth: HCI device and connection manager initialized
[4294718.188000] Bluetooth: HCI socket layer initialized
[4294718.207000] Bluetooth: L2CAP ver 2.7
[4294718.207000] Bluetooth: L2CAP socket layer initialized
[4294718.240000] Bluetooth: RFCOMM ver 1.5
[4294718.240000] Bluetooth: RFCOMM socket layer initialized
[4294718.240000] Bluetooth: RFCOMM TTY layer initialized
[4294719.093000] eth0: no IPv6 routers present

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
sudo lsmod:

Module Size Used by
rfcomm 34972 0
l2cap 22404 5 rfcomm
bluetooth 43012 4 rfcomm,l2cap
cpufreq_userspace 4444 0
cpufreq_stats 5124 0
freq_table 4484 1 cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 5916 0
cpufreq_conservative 6820 0
video 16004 0
tc1100_wmi 6916 0
sony_acpi 5516 0
pcc_acpi 11392 0
hotkey 9508 0
dev_acpi 11396 0
i2c_acpi_ec 5760 0
i2c_core 19728 1 i2c_acpi_ec
button 6672 0
battery 9604 0
container 4608 0
ac 4996 0
ipv6 217408 8
af_packet 20232 2
tsdev 7616 0
floppy 52692 0
pcspkr 3652 0
rtc 11832 0
emu10k1_gp 3712 0
gameport 14472 2 emu10k1_gp
snd_emu10k1_synth 6528 0
snd_emux_synth 31744 1 snd_emu10k1_synth
snd_seq_virmidi 6912 1 snd_emux_synth
snd_seq_midi_emul 6528 1 snd_emux_synth
snd_seq_dummy 3844 0
snd_seq_oss 29440 0
snd_seq_midi 8608 0
snd_seq_midi_event 6656 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
snd_seq 44688 9 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_emu10k1 96772 1 snd_emu10k1_synth
snd_rawmidi 22816 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1
snd_seq_device 8204 8 snd_emu10k1_synth,snd_emux_synth,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_emu10k1,snd_rawmidi
snd_util_mem 4480 2 snd_emux_synth,snd_emu10k1
snd_hwdep 8608 2 snd_emux_synth,snd_emu10k1
snd_intel8x0 30144 1
snd_ac97_codec 72188 2 snd_emu10k1,snd_intel8x0
snd_pcm_oss 46368 0
snd_mixer_oss 16128 1 snd_pcm_oss
snd_pcm 78344 4 snd_emu10k1,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer 21764 3 snd_seq,snd_emu10k1,snd_pcm
snd 48644 16 snd_emux_synth,snd_seq_virmidi,snd_seq_oss,snd_seq,snd_emu10k1,snd_rawmidi,snd_seq_device,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9184 1 snd
snd_page_alloc 10120 3 snd_emu10k1,snd_intel8x0,snd_pcm
pci_hotplug 24628 0
sis_agp 8452 1
agpgart 32328 1 sis_agp
nls_cp437 5888 1
ntfs 92016 1
dm_mod 50364 1
evdev 9088 0
psmouse 26116 0
mousedev 10912 1
parport_pc 31812 1
lp 11460 0
parport 32072 2 parport_pc,lp
md 40656 0
ext3 115976 1
jbd 48536 1 ext3
thermal 13192 0
processor 23100 1 thermal
fan 4740 0
usbhid 30688 0
sis900 19456 0
mii 5248 1 sis900
ehci_hcd 29448 0
ohci_hcd 18564 0
usbcore 104316 4 usbhid,ehci_hcd,ohci_hcd
ide_cd 36996 0
cdrom 33952 1 ide_cd
ide_disk 16128 4
ide_generic 1664 0
sata_sis 7552 0
libata 47876 1 sata_sis
scsi_mod 124872 1 libata
sis5513 14472 1
ide_core 125268 4 ide_cd,ide_disk,ide_generic,sis5513
unix 24624 572
vesafb 8088 0
capability 5000 0
commoncap 6784 1 capability
vga16fb 12232 1
vgastate 8320 1 vga16fb
softcursor 2432 2 vesafb,vga16fb
cfbimgblt 2944 2 vesafb,vga16fb
cfbfillrect 3840 2 vesafb,vga16fb
cfbcopyarea 4480 2 vesafb,vga16fb
fbcon 34176 72
tileblit 2560 1 fbcon
font 8448 1 fbcon
bitblit 5248 1 fbcon

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
sudo cat /proc/asound/cards:

0 [SI7012 ]: ICH - SiS SI7012
                     SiS SI7012 with AD1888 at 0xe000, irq 18
1 [Live ]: EMU10K1 - SB Live [Unknown]
                     SB Live [Unknown] (rev.7, serial:0x80621102) at 0xee00, irq 19

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
sudo /etc/init.d/alsa reload:

/etc/init.d/alsa: Warning: Processes using sound devices: 9061(mixer_applet2).
Unloading ALSA sound driver modules: snd-emu10k1-synth snd-emux-synth snd-seq-virmidi snd-seq-midi-emul snd-seq-dummy snd-seq-oss snd-seq-midi snd-seq-midi-event snd-seq snd-emu10k1 snd-rawmidi snd-seq-device snd-util-mem snd-hwdep snd-intel8x0 snd-ac97-codec snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-page-alloc (failed: modules still loaded: snd-intel8x0 snd-ac97-codec snd-pcm snd-timer snd-page-alloc).
Loading ALSA sound driver modules: snd-emu10k1-synth snd-emux-synth snd-seq-virmidi snd-seq-midi-emul snd-seq-dummy snd-seq-oss snd-seq-midi snd-seq-midi-event snd-seq snd-emu10k1 snd-rawmidi snd-seq-device snd-util-mem snd-hwdep snd-intel8x0 snd-ac97-codec snd-pcm-oss snd-mixer-oss snd-pcm snd-timer snd-page-alloc.

Mmmmm, interesting, you have two sound cards, which one has the speakers plugged?
Which one you want to set as your default one?

You may switch between them in the Sound Preferences dialog, go to [Top panel]->System->Preferences->Sound
at the bottom of the dialog box you'll see see dropdown listing your two soundcards, please select the one which you want to use as default.

Yes!

Now it works! I can play cd's now!

But I still have a problem.

When I want to play a mp3-file, the audioplayer says:
not a soundtream.

??????

I fixed the mp3-part...

so now everything works!

Thanks for all the help // Donne