Cannot wirelessly connect to Windows XP host from Ubuntu 10.10 virtual machine in Oracle VirtualBox
How do I shift from ethernet to wireless connection with host computer from Ubuntu 10.10 virtual machine???
System:
GatewaySystem
AMD Athlon Processor L110
Windows XP Service Pack 3
Network adapters:
Atheros AR5B95 Wireless Network Adapter
Realtek RTL8102/8103/8136 Fanily PCI-E FE NIC
Unknown device
VirtualBox Host-Only Ethernet Adapter
jacque@
[sudo] password for jacque:
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Reading package lists... Done
jacque@
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
rfkill is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
jacque@
*-network
description: Ethernet interface
product: 82540EM Gigabit Ethernet Controller
vendor: Intel Corporation
physical id: 3
bus info: pci@0000:00:03.0
logical name: eth0
version: 02
serial: 08:00:27:19:94:b2
size: 1GB/s
capacity: 1GB/s
width: 32 bits
clock: 66MHz
resources: irq:10 memory:
jacque@
jacque@
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
jacque@
auto lo
iface lo inet loopback
jacque@
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
jacque@
No command 'lspce' found, did you mean:
Command 'lspci' from package 'pciutils' (main)
lspce: command not found
jacque@
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef]
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f]
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
jacque@
Bus 001 Device 002: ID 80ee:0021
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
jacque@
H/W path Device Class Description
=======
/0 bus Motherboard
/0/0 memory 128KiB BIOS
/0/1 memory 496MiB System memory
/0/2 processor AMD Athlon(tm) Processor L110
/0/2/0 memory 128KiB L1 cache
/0/2/1 memory 512KiB L2 cache
/0/100 bridge 440FX - 82441FX PMC [Natoma]
/0/100/1 bridge 82371SB PIIX3 ISA [Natoma/Triton II]
/0/100/1.1 scsi1 storage 82371AB/EB/MB PIIX4 IDE
/0/100/1.1/0.0.0 /dev/cdrom disk DVD reader
/0/100/2 display VirtualBox Graphics Adapter
/0/100/3 eth0 network 82540EM Gigabit Ethernet Controller
/0/100/4 generic VirtualBox Guest Service
/0/100/5 multimedia 82801AA AC'97 Audio Controller
/0/100/6 bus KeyLargo/Intrepid USB
/0/100/7 bridge 82371AB/EB/MB PIIX4 ACPI
/0/100/d scsi2 storage 82801HBM/HEM (ICH8M/ICH8M-E) SATA AH
/0/100/d/0.0.0 /dev/sda disk 8589MB VBOX HARDDISK
/0/100/d/0.0.0/1 /dev/sda1 volume 7791MiB EXT4 volume
/0/100/d/0.0.0/2 /dev/sda2 volume 398MiB Extended partition
/0/100/d/0.0.0/2/5 /dev/sda5 volume 398MiB Linux swap / Solaris partitio
jacque@
Linux jacquez-VirtualBox 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 i686 GNU/Linux
jacque@
[ 0.000000] Found and enabled local APIC!
[ 0.287806] SMP alternatives: switching to UP code
[ 2.569865] ACPI: No dock devices found.
[ 2.655717] HEST: Table is not found!
[ 2.669871] usbcore: registered new interface driver usbfs
[ 2.669932] usbcore: registered new interface driver hub
[ 2.670278] usbcore: registered new device driver usb
[ 2.700313] Switching to clocksource tsc
[ 2.734597] pnp: PnP ACPI: found 5 devices
[ 2.798055] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 2.802044] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 3.265102] ERST: Table is not found!
[ 3.602222] hub 1-0:1.0: USB hub found
[ 3.812720] device-mapper: multipath: version 1.1.1 loaded
[ 3.812798] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.043430] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.146064] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 4.476537] isapnp: No Plug & Play device found
[ 8.250295] usbcore: registered new interface driver hiddev
[ 8.308133] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:19:94:b2
[ 8.315302] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 8.316486] input: VirtualBox USB Tablet as /devices/
[ 8.317018] generic-usb 0003:80EE:
[ 8.317208] usbcore: registered new interface driver usbhid
[ 8.317238] usbhid: USB HID core driver
[ 22.695486] lp: driver loaded but no devices found
[ 33.050290] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 44.000341] eth0: no IPv6 routers present
jacque@
[sudo] password for jacque:
Release Date: 12/01/2006
Manufacturer: innotek GmbH
Product Name: VirtualBox
Serial Number: 0
jacque@
lo no wireless extensions.
eth0 no wireless extensions.
jacque@
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
# Cause optional modules to be loaded above sound card driver modules
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Keep snd-pcsp from being loaded as first soundcard
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist usbmouse
blacklist usbkbd
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
# low-quality, just noise when being used for sound playback, causes
blacklist sound
blacklist uart6850
blacklist dmasound_core
blacklist dmasound_pmac
blacklist soundcard
blacklist usb-midi
blacklist pcwd_usb
blacklist twl4030_wdt
options iwlagn 11n_disable=1
jacque@
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
jacque@
[sudo] password for jacque:
> hal.1: read hal dataprocess 1976: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
12: PCI 03.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.GkSpXDNdaaB
SysFS ID: /devices/
SysFS BusID: 0000:00:03.0
Hardware Class: network
Model: "Intel PRO/1000 MT Desktop Adapter"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x100e "82540EM Gigabit Ethernet Controller"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x001e "PRO/1000 MT Desktop Adapter"
Revision: 0x02
Driver: "e1000"
Driver Modules: "e1000"
Device File: eth0
Memory Range: 0xf0000000-
I/O Ports: 0xd010-0xd017 (rw)
IRQ: 10 (3416 events)
HW Address: 08:00:27:19:94:b2
Link detected: yes
Module Alias: "pci:v00008086d
Driver Info #0:
Driver Status: e1000 is active
Driver Activation Cmd: "modprobe e1000"
Config Status: cfg=new, avail=yes, need=no, active=unknown
jacque@
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 585 0.0 0.7 19140 4032 ? Ssl 11:54 0:00 NetworkManager
root 624 0.0 0.2 4900 1512 ? S 11:54 0:00 /sbin/wpa_
root 625 0.0 0.1 2296 996 ? S 11:54 0:00 /sbin/dhclient -d -sf /usr/lib/
jacque 2025 0.0 0.1 4012 732 pts/0 S+ 13:43 0:00 egrep --color=auto wpa|icd|etwork
jacque@
[sudo] password for jacque:
Module Size Used by
binfmt_misc 6599 1
vboxvideo 1240 1
drm 168054 2 vboxvideo
agpgart 32011 1 drm
vboxsf 36395 0
snd_intel8x0 25632 2
snd_ac97_codec 99227 1 snd_intel8x0
ac97_bus 1014 1 snd_ac97_codec
snd_pcm 71475 2 snd_intel8x0,
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_
ppdev 5556 0
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_
snd 49006 11 snd_intel8x0,
parport_pc 26058 0
joydev 8735 0
psmouse 59033 0
vboxguest 195554 6 vboxsf
serio_raw 4022 0
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_intel8x0,
i2c_piix4 8635 0
lp 7342 0
parport 31492 3 ppdev,parport_pc,lp
usbhid 36882 0
hid 67742 1 usbhid
ahci 19013 0
e1000 97525 0
libahci 21667 3 ahci
jacque@
jacque@
[sudo] password for jacque:
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Reading package lists... Done
jacque@
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
rfkill is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
jacque@
*-network
description: Ethernet interface
product: 82540EM Gigabit Ethernet Controller
vendor: Intel Corporation
physical id: 3
bus info: pci@0000:00:03.0
logical name: eth0
version: 02
serial: 08:00:27:19:94:b2
size: 1GB/s
capacity: 1GB/s
width: 32 bits
clock: 66MHz
resources: irq:10 memory:
jacque@
jacque@
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
jacque@
auto lo
iface lo inet loopback
jacque@
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
jacque@
No command 'lspce' found, did you mean:
Command 'lspci' from package 'pciutils' (main)
lspce: command not found
jacque@
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef]
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f]
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
jacque@
Bus 001 Device 002: ID 80ee:0021
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
jacque@
H/W path Device Class Description
=======
/0 bus Motherboard
/0/0 memory 128KiB BIOS
/0/1 memory 496MiB System memory
/0/2 processor AMD Athlon(tm) Processor L110
/0/2/0 memory 128KiB L1 cache
/0/2/1 memory 512KiB L2 cache
/0/100 bridge 440FX - 82441FX PMC [Natoma]
/0/100/1 bridge 82371SB PIIX3 ISA [Natoma/Triton II]
/0/100/1.1 scsi1 storage 82371AB/EB/MB PIIX4 IDE
/0/100/1.1/0.0.0 /dev/cdrom disk DVD reader
/0/100/2 display VirtualBox Graphics Adapter
/0/100/3 eth0 network 82540EM Gigabit Ethernet Controller
/0/100/4 generic VirtualBox Guest Service
/0/100/5 multimedia 82801AA AC'97 Audio Controller
/0/100/6 bus KeyLargo/Intrepid USB
/0/100/7 bridge 82371AB/EB/MB PIIX4 ACPI
/0/100/d scsi2 storage 82801HBM/HEM (ICH8M/ICH8M-E) SATA AH
/0/100/d/0.0.0 /dev/sda disk 8589MB VBOX HARDDISK
/0/100/d/0.0.0/1 /dev/sda1 volume 7791MiB EXT4 volume
/0/100/d/0.0.0/2 /dev/sda2 volume 398MiB Extended partition
/0/100/d/0.0.0/2/5 /dev/sda5 volume 398MiB Linux swap / Solaris partitio
jacque@
Linux jacquez-VirtualBox 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 i686 GNU/Linux
jacque@
[ 0.000000] Found and enabled local APIC!
[ 0.287806] SMP alternatives: switching to UP code
[ 2.569865] ACPI: No dock devices found.
[ 2.655717] HEST: Table is not found!
[ 2.669871] usbcore: registered new interface driver usbfs
[ 2.669932] usbcore: registered new interface driver hub
[ 2.670278] usbcore: registered new device driver usb
[ 2.700313] Switching to clocksource tsc
[ 2.734597] pnp: PnP ACPI: found 5 devices
[ 2.798055] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 2.802044] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 3.265102] ERST: Table is not found!
[ 3.602222] hub 1-0:1.0: USB hub found
[ 3.812720] device-mapper: multipath: version 1.1.1 loaded
[ 3.812798] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.043430] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.146064] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 4.476537] isapnp: No Plug & Play device found
[ 8.250295] usbcore: registered new interface driver hiddev
[ 8.308133] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:19:94:b2
[ 8.315302] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 8.316486] input: VirtualBox USB Tablet as /devices/
[ 8.317018] generic-usb 0003:80EE:
[ 8.317208] usbcore: registered new interface driver usbhid
[ 8.317238] usbhid: USB HID core driver
[ 22.695486] lp: driver loaded but no devices found
[ 33.050290] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 44.000341] eth0: no IPv6 routers present
jacque@
[sudo] password for jacque:
Release Date: 12/01/2006
Manufacturer: innotek GmbH
Product Name: VirtualBox
Serial Number: 0
jacque@
lo no wireless extensions.
eth0 no wireless extensions.
jacque@
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
# Cause optional modules to be loaded above sound card driver modules
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Keep snd-pcsp from being loaded as first soundcard
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist usbmouse
blacklist usbkbd
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
# low-quality, just noise when being used for sound playback, causes
blacklist sound
blacklist uart6850
blacklist dmasound_core
blacklist dmasound_pmac
blacklist soundcard
blacklist usb-midi
blacklist pcwd_usb
blacklist twl4030_wdt
options iwlagn 11n_disable=1
jacque@
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
jacque@
[sudo] password for jacque:
> hal.1: read hal dataprocess 1976: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
12: PCI 03.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.GkSpXDNdaaB
SysFS ID: /devices/
SysFS BusID: 0000:00:03.0
Hardware Class: network
Model: "Intel PRO/1000 MT Desktop Adapter"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x100e "82540EM Gigabit Ethernet Controller"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x001e "PRO/1000 MT Desktop Adapter"
Revision: 0x02
Driver: "e1000"
Driver Modules: "e1000"
Device File: eth0
Memory Range: 0xf0000000-
I/O Ports: 0xd010-0xd017 (rw)
IRQ: 10 (3416 events)
HW Address: 08:00:27:19:94:b2
Link detected: yes
Module Alias: "pci:v00008086d
Driver Info #0:
Driver Status: e1000 is active
Driver Activation Cmd: "modprobe e1000"
Config Status: cfg=new, avail=yes, need=no, active=unknown
jacque@
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 585 0.0 0.7 19140 4032 ? Ssl 11:54 0:00 NetworkManager
root 624 0.0 0.2 4900 1512 ? S 11:54 0:00 /sbin/wpa_
root 625 0.0 0.1 2296 996 ? S 11:54 0:00 /sbin/dhclient -d -sf /usr/lib/
jacque 2025 0.0 0.1 4012 732 pts/0 S+ 13:43 0:00 egrep --color=auto wpa|icd|etwork
jacque@
[sudo] password for jacque:
Module Size Used by
binfmt_misc 6599 1
vboxvideo 1240 1
drm 168054 2 vboxvideo
agpgart 32011 1 drm
vboxsf 36395 0
snd_intel8x0 25632 2
snd_ac97_codec 99227 1 snd_intel8x0
ac97_bus 1014 1 snd_ac97_codec
snd_pcm 71475 2 snd_intel8x0,
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_
ppdev 5556 0
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_
snd 49006 11 snd_intel8x0,
parport_pc 26058 0
joydev 8735 0
psmouse 59033 0
vboxguest 195554 6 vboxsf
serio_raw 4022 0
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_intel8x0,
i2c_piix4 8635 0
lp 7342 0
parport 31492 3 ppdev,parport_pc,lp
usbhid 36882 0
hid 67742 1 usbhid
ahci 19013 0
e1000 97525 0
libahci 21667 3 ahci
jacque@
jacque@
[sudo] password for jacque:
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Reading package lists... Done
jacque@
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
rfkill is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 6 not upgraded.
jacque@
*-network
description: Ethernet interface
product: 82540EM Gigabit Ethernet Controller
vendor: Intel Corporation
physical id: 3
bus info: pci@0000:00:03.0
logical name: eth0
version: 02
serial: 08:00:27:19:94:b2
size: 1GB/s
capacity: 1GB/s
width: 32 bits
clock: 66MHz
resources: irq:10 memory:
jacque@
jacque@
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
jacque@
auto lo
iface lo inet loopback
jacque@
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
jacque@
No command 'lspce' found, did you mean:
Command 'lspci' from package 'pciutils' (main)
lspce: command not found
jacque@
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
00:02.0 VGA compatible controller [0300]: InnoTek Systemberatung GmbH VirtualBox Graphics Adapter [80ee:beef]
00:03.0 Ethernet controller [0200]: Intel Corporation 82540EM Gigabit Ethernet Controller [8086:100e] (rev 02)
00:04.0 System peripheral [0880]: InnoTek Systemberatung GmbH VirtualBox Guest Service [80ee:cafe]
00:05.0 Multimedia audio controller [0401]: Intel Corporation 82801AA AC'97 Audio Controller [8086:2415] (rev 01)
00:06.0 USB Controller [0c03]: Apple Computer Inc. KeyLargo/Intrepid USB [106b:003f]
00:07.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 08)
00:0d.0 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02)
jacque@
Bus 001 Device 002: ID 80ee:0021
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
jacque@
H/W path Device Class Description
=======
/0 bus Motherboard
/0/0 memory 128KiB BIOS
/0/1 memory 496MiB System memory
/0/2 processor AMD Athlon(tm) Processor L110
/0/2/0 memory 128KiB L1 cache
/0/2/1 memory 512KiB L2 cache
/0/100 bridge 440FX - 82441FX PMC [Natoma]
/0/100/1 bridge 82371SB PIIX3 ISA [Natoma/Triton II]
/0/100/1.1 scsi1 storage 82371AB/EB/MB PIIX4 IDE
/0/100/1.1/0.0.0 /dev/cdrom disk DVD reader
/0/100/2 display VirtualBox Graphics Adapter
/0/100/3 eth0 network 82540EM Gigabit Ethernet Controller
/0/100/4 generic VirtualBox Guest Service
/0/100/5 multimedia 82801AA AC'97 Audio Controller
/0/100/6 bus KeyLargo/Intrepid USB
/0/100/7 bridge 82371AB/EB/MB PIIX4 ACPI
/0/100/d scsi2 storage 82801HBM/HEM (ICH8M/ICH8M-E) SATA AH
/0/100/d/0.0.0 /dev/sda disk 8589MB VBOX HARDDISK
/0/100/d/0.0.0/1 /dev/sda1 volume 7791MiB EXT4 volume
/0/100/d/0.0.0/2 /dev/sda2 volume 398MiB Extended partition
/0/100/d/0.0.0/2/5 /dev/sda5 volume 398MiB Linux swap / Solaris partitio
jacque@
Linux jacquez-VirtualBox 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 i686 GNU/Linux
jacque@
[ 0.000000] Found and enabled local APIC!
[ 0.287806] SMP alternatives: switching to UP code
[ 2.569865] ACPI: No dock devices found.
[ 2.655717] HEST: Table is not found!
[ 2.669871] usbcore: registered new interface driver usbfs
[ 2.669932] usbcore: registered new interface driver hub
[ 2.670278] usbcore: registered new device driver usb
[ 2.700313] Switching to clocksource tsc
[ 2.734597] pnp: PnP ACPI: found 5 devices
[ 2.798055] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 2.802044] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 3.265102] ERST: Table is not found!
[ 3.602222] hub 1-0:1.0: USB hub found
[ 3.812720] device-mapper: multipath: version 1.1.1 loaded
[ 3.812798] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.043430] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.146064] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 4.476537] isapnp: No Plug & Play device found
[ 8.250295] usbcore: registered new interface driver hiddev
[ 8.308133] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:19:94:b2
[ 8.315302] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 8.316486] input: VirtualBox USB Tablet as /devices/
[ 8.317018] generic-usb 0003:80EE:
[ 8.317208] usbcore: registered new interface driver usbhid
[ 8.317238] usbhid: USB HID core driver
[ 22.695486] lp: driver loaded but no devices found
[ 33.050290] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 44.000341] eth0: no IPv6 routers present
jacque@
[sudo] password for jacque:
Release Date: 12/01/2006
Manufacturer: innotek GmbH
Product Name: VirtualBox
Serial Number: 0
jacque@
lo no wireless extensions.
eth0 no wireless extensions.
jacque@
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
# Cause optional modules to be loaded above sound card driver modules
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Keep snd-pcsp from being loaded as first soundcard
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist usbmouse
blacklist usbkbd
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
# most apps now use garmin usb driver directly (Ubuntu: #114565)
# low-quality, just noise when being used for sound playback, causes
blacklist sound
blacklist uart6850
blacklist dmasound_core
blacklist dmasound_pmac
blacklist soundcard
blacklist usb-midi
blacklist pcwd_usb
blacklist twl4030_wdt
options iwlagn 11n_disable=1
jacque@
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
jacque@
[sudo] password for jacque:
> hal.1: read hal dataprocess 1976: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
12: PCI 03.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.GkSpXDNdaaB
SysFS ID: /devices/
SysFS BusID: 0000:00:03.0
Hardware Class: network
Model: "Intel PRO/1000 MT Desktop Adapter"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x100e "82540EM Gigabit Ethernet Controller"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x001e "PRO/1000 MT Desktop Adapter"
Revision: 0x02
Driver: "e1000"
Driver Modules: "e1000"
Device File: eth0
Memory Range: 0xf0000000-
I/O Ports: 0xd010-0xd017 (rw)
IRQ: 10 (3416 events)
HW Address: 08:00:27:19:94:b2
Link detected: yes
Module Alias: "pci:v00008086d
Driver Info #0:
Driver Status: e1000 is active
Driver Activation Cmd: "modprobe e1000"
Config Status: cfg=new, avail=yes, need=no, active=unknown
jacque@
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 585 0.0 0.7 19140 4032 ? Ssl 11:54 0:00 NetworkManager
root 624 0.0 0.2 4900 1512 ? S 11:54 0:00 /sbin/wpa_
root 625 0.0 0.1 2296 996 ? S 11:54 0:00 /sbin/dhclient -d -sf /usr/lib/
jacque 2025 0.0 0.1 4012 732 pts/0 S+ 13:43 0:00 egrep --color=auto wpa|icd|etwork
jacque@
[sudo] password for jacque:
Module Size Used by
binfmt_misc 6599 1
vboxvideo 1240 1
drm 168054 2 vboxvideo
agpgart 32011 1 drm
vboxsf 36395 0
snd_intel8x0 25632 2
snd_ac97_codec 99227 1 snd_intel8x0
ac97_bus 1014 1 snd_ac97_codec
snd_pcm 71475 2 snd_intel8x0,
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_
ppdev 5556 0
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_
snd 49006 11 snd_intel8x0,
parport_pc 26058 0
joydev 8735 0
psmouse 59033 0
vboxguest 195554 6 vboxsf
serio_raw 4022 0
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_intel8x0,
i2c_piix4 8635 0
lp 7342 0
parport 31492 3 ppdev,parport_pc,lp
usbhid 36882 0
hid 67742 1 usbhid
ahci 19013 0
e1000 97525 0
libahci 21667 3 ahci
jacque@
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Can you help with this problem?
Provide an answer of your own, or ask Jacqueline Lundy for more information if necessary.