Ubuntu
network-manager package

Jaunty no reconoce el modem Huawei E226 después de actualizar NetworkManager y otros.

Asked by Pablo Estigarribia

uname -r
2.6.28-11-generic

En bugzilla creé este ticket por las dudas http://bugzilla.gnome.org/post_bug.cgi :

I can't connect through modem Huawei E226 since some updates of Network Manager, Network Apple does not show anything when I connect the modem, but lsusb shows the modem:

sudo lsusb -s007:005 -v

Bus 007 Device 005: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 64
  idVendor 0x12d1 Huawei Technologies Co., Ltd.
  idProduct 0x1003 E220 HSDPA Modem / E270 HSDPA/HSUPA Modem
  bcdDevice 0.00
  iManufacturer 1 HUAWEI Technologies
  iProduct 2 HUAWEI Mobile
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 85
    bNumInterfaces 3
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower 500mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 3
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 3 Data Interface
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0010 1x 16 bytes
        bInterval 128
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x02 EP 2 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 1
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 3 Data Interface
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x85 EP 5 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x05 EP 5 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 2
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 8 Mass Storage
      bInterfaceSubClass 6 SCSI
      bInterfaceProtocol 80 Bulk (Zip)
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x83 EP 3 IN
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x04 EP 4 OUT
        bmAttributes 2
          Transfer Type Bulk
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0040 1x 64 bytes
        bInterval 0
Device Status: 0x0002
  (Bus Powered)
  Remote Wakeup Enabled

Question information

Language:
Spanish Edit question
Status:
Solved
For:
Ubuntu network-manager Edit question
Assignee:
No assignee Edit question
Solved by:
Pablo Estigarribia
Solved:
Last query:
Last reply:
Revision history for this message
Pablo Estigarribia (pablodav) said : 		#1

Quería adjunt dmesg pero no encuentro donde está la opción de attachments así que lo agrego acá:

[ 0.000000] BIOS EBDA/lowmem at: 0009ac00/0009ac00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-11-generic (buildd@rothera) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #36-Ubuntu SMP Fri Mar 20 19:40:40 UTC 2009 (Ubuntu 2.6.28-11.36-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable)
[ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009ac00 (usable)
[ 0.000000] modified: 000000000009ac00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
[ 0.000000] modified: 000000007f7f0000 - 000000007f800000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378bd000 - 37fef8f1
[ 0.000000] Allocated new RAMDISK: 00881000 - 00fb38f1
[ 0.000000] Move RAMDISK from 00000000378bd000 - 0000000037fef8f0 to 00881000 - 00fb38f0
[ 0.000000] ACPI: RSDP 000F8750, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 7F7A0000, 0048 (r1 MSI_NB MEGABOOK 20070528 MSFT 97)
[ 0.000000] ACPI: FACP 7F7A0200, 0084 (r2 052807 FACP1327 20070528 MSFT 97)
[ 0.000000] ACPI: DSDT 7F7A05B0, 5B1B (r1 A1221 A1221000 0 INTL 20051117)
[ 0.000000] ACPI: FACS 7F7AE000, 0040
[ 0.000000] ACPI: APIC 7F7A0390, 005C (r1 052807 APIC1327 20070528 MSFT 97)
[ 0.000000] ACPI: MCFG 7F7A03F0, 003C (r1 052807 OEMMCFG 20070528 MSFT 97)
[ 0.000000] ACPI: SLIC 7F7A0430, 0176 (r1 MSI_NB MEGABOOK 20070528 MSFT 97)
[ 0.000000] ACPI: OEMB 7F7AE040, 0071 (r1 052807 OEMB1327 20070528 MSFT 97)
[ 0.000000] ACPI: HPET 7F7A60D0, 0038 (r1 052807 OEMHPET 20070528 MSFT 97)
[ 0.000000] ACPI: GSCI 7F7AE0C0, 2024 (r1 052807 GMCHSCI 20070528 MSFT 97)
[ 0.000000] ACPI: TCPA 7F7A6110, 0032 (r1 052807 TBLOEMID 1 MSFT 97)
[ 0.000000] ACPI: SSDT 7F7C3980, 04E6 (r1 PmRef CpuPm 3000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 883MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 373fe000
[ 0.000000] low ram: 00000000 - 373fe000
[ 0.000000] bootmap 00012000 - 00018e80
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c]
[ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000]
[ 0.000000] #5 [000009ac00 - 0000100000] BIOS reserved ==> [000009ac00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000881000 - 0000fb38f1] NEW RAMDISK ==> [0000881000 - 0000fb38f1]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000373fe
[ 0.000000] HighMem 0x000373fe -> 0x0007f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x0007f7a0
[ 0.000000] On node 0 totalpages: 522026
[ 0.000000] free_area_init_node: node 0, pgdat c06d0f00, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3946 pages, LIFO batch:0
[ 0.000000] Normal zone: 1736 pages used for memmap
[ 0.000000] Normal zone: 220470 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2312 pages used for memmap
[ 0.000000] HighMem zone: 293530 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517946
[ 0.000000] Kernel command line: root=UUID=6a16c92d-b2f7-42ca-a384-f91ba8345a5f ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.448 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] allocated 10442560 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Scanning for low memory corruption every 60 seconds
[ 0.004000] Memory: 2044724k/2088576k available (4126k kernel code, 42524k reserved, 2209k data, 532k init, 1183368k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
[ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB)
[ 0.004000] .data : 0xc0507a4f - 0xc072fe60 (2209 kB)
[ 0.004000] .text : 0xc0100000 - 0xc0507a4f (4126 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3590.89 BogoMIPS (lpj=7181792)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.019716] ACPI: Core revision 20080926
[ 0.022274] ACPI: Checking initramfs for custom DSDT
[ 0.513051] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.552750] CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.556002] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3591.00 BogoMIPS (lpj=7182000)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.640686] CPU1: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
[ 0.640709] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.644042] Brought up 2 CPUs
[ 0.644046] Total of 2 processors activated (7181.89 BogoMIPS).
[ 0.644104] CPU0 attaching sched-domain:
[ 0.644108] domain 0: span 0-1 level MC
[ 0.644112] groups: 0 1
[ 0.644122] CPU1 attaching sched-domain:
[ 0.644125] domain 0: span 0-1 level MC
[ 0.644129] groups: 1 0
[ 0.644227] net_namespace: 776 bytes
[ 0.644233] Booting paravirtualized kernel on bare hardware
[ 0.644495] Time: 1:05:25 Date: 03/24/09
[ 0.644495] regulator: core version 0.5
[ 0.644495] NET: Registered protocol family 16
[ 0.644495] EISA bus registered
[ 0.644495] ACPI: bus type pci registered
[ 0.644495] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.644495] PCI: Not using MMCONFIG.
[ 0.644533] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.644536] PCI: Using configuration type 1 for base access
[ 0.649156] ACPI: EC: Look up EC in DSDT
[ 0.657765] ACPI: Interpreter enabled
[ 0.657774] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.657808] ACPI: Using IOAPIC for interrupt routing
[ 0.657892] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.656017] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.656024] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 1.156010] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1.159617] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 1.159621] PCI: Using MMCONFIG for extended config space
[ 1.169411] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.169415] ACPI: EC: driver started in poll mode
[ 1.169663] ACPI: No dock devices found.
[ 1.169769] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.169899] pci 0000:00:02.0: reg 10 64bit mmio: [0xfda00000-0xfdafffff]
[ 1.169911] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[ 1.169919] pci 0000:00:02.0: reg 20 io port: [0xb480-0xb487]
[ 1.169971] pci 0000:00:02.1: reg 10 64bit mmio: [0xfdb00000-0xfdbfffff]
[ 1.170090] pci 0000:00:1a.0: reg 20 io port: [0xb800-0xb81f]
[ 1.170155] pci 0000:00:1a.1: reg 20 io port: [0xb880-0xb89f]
[ 1.170228] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfdcff000-0xfdcff3ff]
[ 1.170280] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.170286] pci 0000:00:1a.7: PME# disabled
[ 1.170342] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdcf8000-0xfdcfbfff]
[ 1.170383] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.170388] pci 0000:00:1b.0: PME# disabled
[ 1.170453] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.170458] pci 0000:00:1c.0: PME# disabled
[ 1.170525] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.170531] pci 0000:00:1c.1: PME# disabled
[ 1.170598] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 1.170604] pci 0000:00:1c.2: PME# disabled
[ 1.170669] pci 0000:00:1d.0: reg 20 io port: [0xbc00-0xbc1f]
[ 1.170734] pci 0000:00:1d.1: reg 20 io port: [0xc000-0xc01f]
[ 1.170798] pci 0000:00:1d.2: reg 20 io port: [0xc080-0xc09f]
[ 1.170869] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdcff400-0xfdcff7ff]
[ 1.170921] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.170927] pci 0000:00:1d.7: PME# disabled
[ 1.171076] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 1.171082] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 1.171120] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 1.171129] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 1.171139] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 1.171148] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 1.171158] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 1.171227] pci 0000:00:1f.2: reg 10 io port: [0xcc00-0xcc07]
[ 1.171236] pci 0000:00:1f.2: reg 14 io port: [0xc880-0xc883]
[ 1.171245] pci 0000:00:1f.2: reg 18 io port: [0xc800-0xc807]
[ 1.171254] pci 0000:00:1f.2: reg 1c io port: [0xc480-0xc483]
[ 1.171263] pci 0000:00:1f.2: reg 20 io port: [0xc400-0xc41f]
[ 1.171272] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfdcff800-0xfdcfffff]
[ 1.171293] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.171298] pci 0000:00:1f.2: PME# disabled
[ 1.171373] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
[ 1.171379] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe000000-0xfebfffff]
[ 1.171389] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfa000000-0xfcffffff]
[ 1.171465] pci 0000:03:00.0: reg 10 io port: [0xd800-0xd8ff]
[ 1.171494] pci 0000:03:00.0: reg 18 64bit mmio: [0xfdfff000-0xfdffffff]
[ 1.171523] pci 0000:03:00.0: reg 30 32bit mmio: [0xfdfc0000-0xfdfdffff]
[ 1.171540] pci 0000:03:00.0: supports D1 D2
[ 1.171544] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 1.171551] pci 0000:03:00.0: PME# disabled
[ 1.171617] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 1.171624] pci 0000:00:1c.1: bridge 32bit mmio: [0xfdf00000-0xfdffffff]
[ 1.171771] pci 0000:02:00.0: reg 10 32bit mmio: [0xfdeff000-0xfdefffff]
[ 1.171932] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 1.171945] pci 0000:02:00.0: PME# disabled
[ 1.172054] pci 0000:00:1c.2: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 1.172114] pci 0000:01:04.0: reg 10 32bit mmio: [0xfddff000-0xfddff07f]
[ 1.172166] pci 0000:01:04.0: supports D1 D2
[ 1.172170] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot
[ 1.172176] pci 0000:01:04.0: PME# disabled
[ 1.172221] pci 0000:01:04.1: reg 10 32bit mmio: [0xfddff400-0xfddff4ff]
[ 1.172274] pci 0000:01:04.1: supports D1 D2
[ 1.172277] pci 0000:01:04.1: PME# supported from D0 D1 D2 D3hot
[ 1.172284] pci 0000:01:04.1: PME# disabled
[ 1.172329] pci 0000:01:04.2: reg 10 32bit mmio: [0xfddff800-0xfddff87f]
[ 1.172381] pci 0000:01:04.2: supports D1 D2
[ 1.172385] pci 0000:01:04.2: PME# supported from D0 D1 D2 D3hot
[ 1.172391] pci 0000:01:04.2: PME# disabled
[ 1.172437] pci 0000:01:04.3: reg 10 32bit mmio: [0xfddffc00-0xfddffcff]
[ 1.172489] pci 0000:01:04.3: supports D1 D2
[ 1.172492] pci 0000:01:04.3: PME# supported from D0 D1 D2 D3hot
[ 1.172499] pci 0000:01:04.3: PME# disabled
[ 1.172560] pci 0000:00:1e.0: transparent bridge
[ 1.172569] pci 0000:00:1e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 1.172602] bus 00 -> node 0
[ 1.172614] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.173030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 1.173207] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 1.173388] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 1.173567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 1.198152] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 1.198366] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 1.198578] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 1.198787] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 1.198996] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 1.199205] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 1.199414] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 1.199626] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 1.200839] ACPI: WMI: Mapper loaded
[ 1.200885] SCSI subsystem initialized
[ 1.200885] libata version 3.00 loaded.
[ 1.200885] usbcore: registered new interface driver usbfs
[ 1.200885] usbcore: registered new interface driver hub
[ 1.200885] usbcore: registered new device driver usb
[ 1.200885] PCI: Using ACPI for IRQ routing
[ 1.204019] Bluetooth: Core ver 2.13
[ 1.204027] NET: Registered protocol family 31
[ 1.204027] Bluetooth: HCI device and connection manager initialized
[ 1.204027] Bluetooth: HCI socket layer initialized
[ 1.204029] NET: Registered protocol family 8
[ 1.204032] NET: Registered protocol family 20
[ 1.204049] NetLabel: Initializing
[ 1.204052] NetLabel: domain hash size = 128
[ 1.204055] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.204074] NetLabel: unlabeled traffic allowed by default
[ 1.204092] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.204101] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.208103] AppArmor: AppArmor Filesystem Enabled
[ 1.212015] Switched to high resolution mode on CPU 0
[ 1.212753] Switched to high resolution mode on CPU 1
[ 1.212767] pnp: PnP ACPI init
[ 1.212779] ACPI: bus type pnp registered
[ 1.216963] pnp: PnP ACPI: found 14 devices
[ 1.216966] ACPI: ACPI bus type pnp unregistered
[ 1.216971] PnPBIOS: Disabled by ACPI PNP
[ 1.216986] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 1.217010] system 00:08: ioport range 0x400-0x41f has been reserved
[ 1.217014] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 1.217018] system 00:08: ioport range 0x800-0x87f has been reserved
[ 1.217023] system 00:08: ioport range 0x500-0x53f has been reserved
[ 1.217028] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.217032] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.217037] system 00:08: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.217047] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 1.217051] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 1.217061] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.217071] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 1.217076] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
[ 1.217080] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 1.217085] system 00:0d: iomem range 0x100000-0x7f7fffff could not be reserved
[ 1.217089] system 00:0d: iomem range 0xfed90000-0xffffffff could not be reserved
[ 1.251921] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 1.251927] pci 0000:00:1c.0: IO window: 0xe000-0xefff
[ 1.251934] pci 0000:00:1c.0: MEM window: 0xfe000000-0xfebfffff
[ 1.251941] pci 0000:00:1c.0: PREFETCH window: 0x000000fa000000-0x000000fcffffff
[ 1.251951] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 1.251955] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 1.251963] pci 0000:00:1c.1: MEM window: 0xfdf00000-0xfdffffff
[ 1.251969] pci 0000:00:1c.1: PREFETCH window: disabled
[ 1.251978] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02
[ 1.251981] pci 0000:00:1c.2: IO window: disabled
[ 1.251988] pci 0000:00:1c.2: MEM window: 0xfde00000-0xfdefffff
[ 1.251994] pci 0000:00:1c.2: PREFETCH window: disabled
[ 1.252003] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 1.252006] pci 0000:00:1e.0: IO window: disabled
[ 1.252013] pci 0000:00:1e.0: MEM window: 0xfdd00000-0xfddfffff
[ 1.252019] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.252038] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.252045] pci 0000:00:1c.0: setting latency timer to 64
[ 1.252057] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.252063] pci 0000:00:1c.1: setting latency timer to 64
[ 1.252075] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.252081] pci 0000:00:1c.2: setting latency timer to 64
[ 1.252091] pci 0000:00:1e.0: setting latency timer to 64
[ 1.252096] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.252100] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 1.252104] bus: 04 index 0 io port: [0xe000-0xefff]
[ 1.252108] bus: 04 index 1 mmio: [0xfe000000-0xfebfffff]
[ 1.252111] bus: 04 index 2 mmio: [0xfa000000-0xfcffffff]
[ 1.252115] bus: 04 index 3 mmio: [0x0-0x0]
[ 1.252118] bus: 03 index 0 io port: [0xd000-0xdfff]
[ 1.252122] bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff]
[ 1.252125] bus: 03 index 2 mmio: [0x0-0x0]
[ 1.252128] bus: 03 index 3 mmio: [0x0-0x0]
[ 1.252131] bus: 02 index 0 mmio: [0x0-0x0]
[ 1.252134] bus: 02 index 1 mmio: [0xfde00000-0xfdefffff]
[ 1.252138] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.252140] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.252144] bus: 01 index 0 mmio: [0x0-0x0]
[ 1.252147] bus: 01 index 1 mmio: [0xfdd00000-0xfddfffff]
[ 1.252150] bus: 01 index 2 mmio: [0x0-0x0]
[ 1.252153] bus: 01 index 3 io port: [0x00-0xffff]
[ 1.252157] bus: 01 index 4 mmio: [0x000000-0xffffffff]
[ 1.252168] NET: Registered protocol family 2
[ 1.265083] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.265444] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.265860] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.266082] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.266086] TCP reno registered
[ 1.269099] NET: Registered protocol family 1
[ 1.269275] checking if image is initramfs... it is
[ 2.266174] Freeing initrd memory: 7370k freed
[ 2.266454] cpufreq: No nForce2 chipset.
[ 2.266650] audit: initializing netlink socket (disabled)
[ 2.266672] type=2000 audit(1237856726.264:1): initialized
[ 2.280127] highmem bounce pool size: 64 pages
[ 2.280135] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 2.282244] VFS: Disk quotas dquot_6.5.1
[ 2.282343] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.283285] fuse init (API version 7.10)
[ 2.283418] msgmni has been set to 1698
[ 2.283671] alg: No test for stdrng (krng)
[ 2.283691] io scheduler noop registered
[ 2.283694] io scheduler anticipatory registered
[ 2.283697] io scheduler deadline registered
[ 2.283718] io scheduler cfq registered (default)
[ 2.283734] pci 0000:00:02.0: Boot video device
[ 2.288273] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.288323] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.288360] pcieport-driver 0000:00:1c.0: irq 2303 for MSI/MSI-X
[ 2.288377] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.288400] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.288423] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 2.288502] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.288549] pcieport-driver 0000:00:1c.1: found MSI capability
[ 2.288582] pcieport-driver 0000:00:1c.1: irq 2302 for MSI/MSI-X
[ 2.288598] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 2.288618] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 2.288643] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 2.288722] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 2.288768] pcieport-driver 0000:00:1c.2: found MSI capability
[ 2.288801] pcieport-driver 0000:00:1c.2: irq 2301 for MSI/MSI-X
[ 2.288817] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 2.288839] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 2.288859] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 2.288955] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.289636] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.290753] ACPI: AC Adapter [ADP1] (on-line)
[ 2.408126] ACPI: Battery Slot [BAT1] (battery present)
[ 2.408234] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.408238] ACPI: Power Button (FF) [PWRF]
[ 2.408318] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/PNP0C09:00/PNP0C0D:00/input/input1
[ 2.409335] ACPI: Lid Switch [LID0]
[ 2.409412] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.409416] ACPI: Power Button (CM) [PWRB]
[ 2.410283] ACPI: SSDT 7F7C31D0, 0255 (r1 PmRef Cpu0Ist 3000 INTL 20051117)
[ 2.410879] ACPI: SSDT 7F7C34C0, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20051117)
[ 2.411485] Monitor-Mwait will be used to enter C-1 state
[ 2.411490] Monitor-Mwait will be used to enter C-2 state
[ 2.411495] Monitor-Mwait will be used to enter C-3 state
[ 2.411516] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.411553] processor ACPI_CPU:00: registered as cooling_device0
[ 2.412051] ACPI: SSDT 7F7C3100, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20051117)
[ 2.412596] ACPI: SSDT 7F7C3430, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20051117)
[ 2.413291] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.413321] processor ACPI_CPU:01: registered as cooling_device1
[ 2.419512] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.423160] ACPI: Thermal Zone [THRM] (42 C)
[ 2.423244] isapnp: Scanning for PnP cards...
[ 2.776577] isapnp: No Plug & Play device found
[ 2.785307] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.786994] brd: module loaded
[ 2.787468] loop: module loaded
[ 2.787565] Fixed MDIO Bus: probed
[ 2.787573] PPP generic driver version 2.4.2
[ 2.787661] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 2.787707] Driver 'sd' needs updating - please use bus_type methods
[ 2.787721] Driver 'sr' needs updating - please use bus_type methods
[ 2.787781] ahci 0000:00:1f.2: version 3.0
[ 2.787795] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 2.787841] ahci 0000:00:1f.2: irq 2300 for MSI/MSI-X
[ 2.787914] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 2.787919] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems
[ 2.787926] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.788201] scsi0 : ahci
[ 2.788329] scsi1 : ahci
[ 2.788420] scsi2 : ahci
[ 2.788552] ata1: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcff900 irq 2300
[ 2.788557] ata2: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcff980 irq 2300
[ 2.788562] ata3: SATA max UDMA/133 abar m2048@0xfdcff800 port 0xfdcffa00 irq 2300
[ 3.272018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.272517] ata1.00: ATA-8: FUJITSU MHW2120BH, 00000012, max UDMA/100
[ 3.272522] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.273189] ata1.00: configured for UDMA/100
[ 3.608018] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.944018] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.960142] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2120B 0000 PQ: 0 ANSI: 5
[ 3.960283] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.960308] sd 0:0:0:0: [sda] Write Protect is off
[ 3.960312] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.960352] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.960444] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[ 3.960468] sd 0:0:0:0: [sda] Write Protect is off
[ 3.960471] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.960510] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.960515] sda: sda1 sda2 < sda5 >
[ 4.062777] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.062844] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.062921] ata_piix 0000:00:1f.1: version 2.12
[ 4.062934] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.062978] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.063063] scsi3 : ata_piix
[ 4.063155] scsi4 : ata_piix
[ 4.065250] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 4.065255] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.228365] ata4.00: ATAPI: Optiarc DVD RW AD-7530A, EX32, max UDMA/33
[ 4.244320] ata4.00: configured for UDMA/33
[ 4.244921] ata5: port disabled. ignoring.
[ 4.246168] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530A EX32 PQ: 0 ANSI: 5
[ 4.255825] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.255830] Uniform CD-ROM driver Revision: 3.20
[ 4.255965] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 4.256021] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.257087] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.257111] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.257129] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.257134] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.257213] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.261125] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.261134] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.261153] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdcff000
[ 4.276014] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.276116] usb usb1: configuration #1 chosen from 1 choice
[ 4.276158] hub 1-0:1.0: USB hub found
[ 4.276168] hub 1-0:1.0: 4 ports detected
[ 4.276315] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.276331] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.276336] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.276408] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.280319] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.280328] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.280345] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdcff400
[ 4.292014] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.292094] usb usb2: configuration #1 chosen from 1 choice
[ 4.292136] hub 2-0:1.0: USB hub found
[ 4.292145] hub 2-0:1.0: 6 ports detected
[ 4.292285] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.292311] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.292340] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.292348] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.292353] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.292424] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.292460] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 4.292566] usb usb3: configuration #1 chosen from 1 choice
[ 4.292606] hub 3-0:1.0: USB hub found
[ 4.292615] hub 3-0:1.0: 2 ports detected
[ 4.292737] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.292746] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.292750] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.292825] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.292860] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 4.292963] usb usb4: configuration #1 chosen from 1 choice
[ 4.293012] hub 4-0:1.0: USB hub found
[ 4.293022] hub 4-0:1.0: 2 ports detected
[ 4.293148] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.293156] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.293161] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.293222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.293248] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[ 4.293355] usb usb5: configuration #1 chosen from 1 choice
[ 4.293397] hub 5-0:1.0: USB hub found
[ 4.293406] hub 5-0:1.0: 2 ports detected
[ 4.293526] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.293534] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.293539] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.293610] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.293645] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c000
[ 4.293762] usb usb6: configuration #1 chosen from 1 choice
[ 4.293802] hub 6-0:1.0: USB hub found
[ 4.293811] hub 6-0:1.0: 2 ports detected
[ 4.293929] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.293937] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.293941] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.294012] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 4.294038] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080
[ 4.294138] usb usb7: configuration #1 chosen from 1 choice
[ 4.294176] hub 7-0:1.0: USB hub found
[ 4.294185] hub 7-0:1.0: 2 ports detected
[ 4.294370] usbcore: registered new interface driver libusual
[ 4.294417] usbcore: registered new interface driver usbserial
[ 4.294432] USB Serial support registered for generic
[ 4.294458] usbcore: registered new interface driver usbserial_generic
[ 4.294462] usbserial: USB Serial Driver core
[ 4.294544] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 4.294923] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.294996] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.295003] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.295007] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.295011] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.295015] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.295257] mice: PS/2 mouse device common for all mice
[ 4.295518] rtc_cmos 00:03: RTC can wake from S4
[ 4.295571] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.295600] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.295696] device-mapper: uevent: version 1.0.3
[ 4.295826] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: <email address hidden>
[ 4.295919] device-mapper: multipath: version 1.0.5 loaded
[ 4.295923] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.296038] EISA: Probing bus 0 at eisa.0
[ 4.296074] EISA: Detected 0 cards.
[ 4.296251] cpuidle: using governor ladder
[ 4.296444] cpuidle: using governor menu
[ 4.297249] TCP cubic registered
[ 4.297400] NET: Registered protocol family 10
[ 4.298055] lo: Disabled Privacy Extensions
[ 4.298591] NET: Registered protocol family 17
[ 4.298616] Bluetooth: L2CAP ver 2.11
[ 4.298619] Bluetooth: L2CAP socket layer initialized
[ 4.298623] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.298626] Bluetooth: SCO socket layer initialized
[ 4.298657] Marking TSC unstable due to TSC halts in idle
[ 4.298685] Bluetooth: RFCOMM socket layer initialized
[ 4.298694] Bluetooth: RFCOMM TTY layer initialized
[ 4.298696] Bluetooth: RFCOMM ver 1.10
[ 4.299398] Using IPI No-Shortcut mode
[ 4.299468] registered taskstats version 1
[ 4.299615] Magic number: 1:400:54
[ 4.299692] rtc_cmos 00:03: setting system clock to 2009-03-24 01:05:29 UTC (1237856729)
[ 4.299695] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.299697] EDD information not available.
[ 4.299961] Freeing unused kernel memory: 532k freed
[ 4.300131] Write protecting the kernel text: 4128k
[ 4.300199] Write protecting the kernel read-only data: 1532k
[ 4.300956] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.618445] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 4.618468] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.618504] r8169 0000:03:00.0: setting latency timer to 64
[ 4.618743] r8169 0000:03:00.0: irq 2299 for MSI/MSI-X
[ 4.619448] eth0: RTL8168b/8111b at 0xf7c6a000, 00:19:db:3b:69:ac, XID 38000000 IRQ 2299
[ 4.996058] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 5.222628] usb 3-2: configuration #1 chosen from 1 choice
[ 5.260547] PM: Starting manual resume from disk
[ 5.260550] PM: Resume from partition 8:5
[ 5.260552] PM: Checking hibernation image.
[ 5.260762] PM: Resume from disk failed.
[ 5.291632] EXT4-fs: barriers enabled
[ 5.313595] kjournald2 starting. Commit interval 5 seconds
[ 5.313631] EXT4-fs: delayed allocation enabled
[ 5.313634] EXT4-fs: file extents enabled
[ 5.321302] EXT4-fs: mballoc enabled
[ 5.321306] EXT4-fs: mounted filesystem with ordered data mode.
[ 5.464059] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 5.638797] usb 6-1: configuration #1 chosen from 1 choice
[ 5.880060] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 6.058192] usb 7-1: configuration #1 chosen from 1 choice
[ 11.604635] udev: starting version 140
[ 11.956225] iTCO_vendor_support: vendor-support=0
[ 12.006527] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 12.006783] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x0860)
[ 12.006874] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.045076] Linux agpgart interface v0.103
[ 12.069537] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 12.070120] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 12.072744] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.115012] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 12.115120] usbcore: registered new interface driver btusb
[ 12.197804] cfg80211: Calling CRDA to update world regulatory domain
[ 12.263541] acpi device:27: registered as cooling_device2
[ 12.263662] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:23/input/input5
[ 12.266608] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.290172] usbcore: registered new interface driver hiddev
[ 12.303041] input: Acrox USB & PS/2 Mouse as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input6
[ 12.304849] generic-usb 0003:0F62:1001.0001: input,hidraw0: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:1d.1-1/input0
[ 12.304880] usbcore: registered new interface driver usbhid
[ 12.304910] usbhid: v2.6:USB HID core driver
[ 12.315265] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 12.433023] sdhci: Secure Digital Host Controller Interface driver
[ 12.433026] sdhci: Copyright(c) Pierre Ossman
[ 12.444261] sdhci-pci 0000:01:04.1: SDHCI controller found [1524:0750] (rev 0)
[ 12.444277] sdhci-pci 0000:01:04.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.444397] mmc0: SDHCI controller on PCI [0000:01:04.1] using PIO
[ 12.444407] sdhci-pci 0000:01:04.3: SDHCI controller found [1524:0751] (rev 0)
[ 12.444418] sdhci-pci 0000:01:04.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.444485] mmc1: SDHCI controller on PCI [0000:01:04.3] using PIO
[ 12.477017] cfg80211: World regulatory domain updated:
[ 12.477021] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.477024] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.477027] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.477029] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.477031] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.477034] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.554305] WARNING: synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 12.979726] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 12.979730] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 12.979801] iwl3945 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 12.979815] iwl3945 0000:02:00.0: setting latency timer to 64
[ 12.979880] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 12.980096] iwl3945 0000:02:00.0: irq 2298 for MSI/MSI-X
[ 13.033242] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 13.034112] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 13.309101] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 13.309190] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.418364] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
[ 13.447297] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 13.501029] Clocksource tsc unstable (delta = -101858806 ns)
[ 13.639029] lp: driver loaded but no devices found
[ 13.747054] Adding 1494004k swap on /dev/sda5. Priority:-1 extents:1 across:1494004k
[ 43.487881] EXT4 FS on sda1, internal journal on sda1:8
[ 44.393073] type=1505 audit(1237856769.593:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2134
[ 44.458033] type=1505 audit(1237856769.656:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2138
[ 44.458134] type=1505 audit(1237856769.656:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2138
[ 44.458176] type=1505 audit(1237856769.656:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2138
[ 44.458214] type=1505 audit(1237856769.656:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2138
[ 44.497912] type=1505 audit(1237856769.696:7): operation="profile_load" name="/usr/bin/freshclam" name2="default" pid=2143
[ 44.624197] type=1505 audit(1237856769.821:8): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2147
[ 44.624364] type=1505 audit(1237856769.821:9): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2147
[ 44.670804] type=1505 audit(1237856769.868:10): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2151
[ 49.276786] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 49.276790] Bluetooth: BNEP filters: protocol multicast
[ 49.313108] Bridge firewalling registered
[ 50.821958] ppdev: user-space parallel port driver
[ 51.074563] type=1503 audit(1237856776.272:11): operation="inode_permission" requested_mask="w::" denied_mask="w::" fsuid=0 name="/etc/krb5.conf" pid=3038 profile="/usr/sbin/cupsd"
[ 51.967254] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 51.967263] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 51.968505] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 51.968511] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 52.628979] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 52.628987] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 52.630235] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 52.630240] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 52.812113] [drm] Initialized drm 1.1.0 20060810
[ 52.828317] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 52.828323] pci 0000:00:02.0: setting latency timer to 64
[ 52.828439] pci 0000:00:02.0: irq 2297 for MSI/MSI-X
[ 52.828530] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 52.831209] [drm:i915_setparam] *ERROR* unknown parameter 4
[ 53.280598] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 53.280606] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 53.281853] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 53.281859] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[ 53.982858] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 53.982863] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 53.984063] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 53.984067] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[ 54.800138] r8169: eth0: link down
[ 54.800622] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 54.802147] iwl3945 0000:02:00.0: firmware: requesting iwlwifi-3945-1.ucode
[ 54.922709] Registered led device: iwl-phy0:radio
[ 54.922817] Registered led device: iwl-phy0:assoc
[ 54.922857] Registered led device: iwl-phy0:RX
[ 54.922894] Registered led device: iwl-phy0:TX
[ 54.946503] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 82.485042] usb 7-2: new full speed USB device using uhci_hcd and address 3
[ 82.647733] usb 7-2: configuration #1 chosen from 1 choice
[ 82.691465] Initializing USB Mass Storage driver...
[ 82.708215] usb-storage: probe of 7-2:1.0 failed with error -1
[ 82.708270] usbcore: registered new interface driver usb-storage
[ 82.708278] USB Mass Storage support registered.
[ 82.736138] usb 7-2: USB disconnect, address 3
[ 83.500070] usb 7-2: new full speed USB device using uhci_hcd and address 4
[ 83.669061] usb 7-2: configuration #1 chosen from 1 choice
[ 83.748487] usb-storage: probe of 7-2:1.0 failed with error -5
[ 83.776706] usb-storage: probe of 7-2:1.1 failed with error -5
[ 83.784134] usb-storage: probe of 7-2:1.2 failed with error -1
[ 102.576242] usb 7-2: USB disconnect, address 4
[ 112.298463] wlan0: authenticate with AP 00:14:d1:45:1f:8c
[ 112.301723] wlan0: authenticated
[ 112.301734] wlan0: associate with AP 00:14:d1:45:1f:8c
[ 112.304709] wlan0: RX AssocResp from 00:14:d1:45:1f:8c (capab=0x431 status=0 aid=1)
[ 112.304715] wlan0: associated
[ 112.307432] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 113.232107] usb 7-2: new full speed USB device using uhci_hcd and address 5
[ 113.392836] usb 7-2: configuration #1 chosen from 1 choice
[ 113.400432] usb-storage: probe of 7-2:1.0 failed with error -5
[ 113.406850] usb-storage: probe of 7-2:1.1 failed with error -5
[ 113.414153] usb-storage: probe of 7-2:1.2 failed with error -1
[ 113.485067] USB Serial support registered for GSM modem (1-port)
[ 113.485119] option 7-2:1.0: GSM modem (1-port) converter detected
[ 113.485201] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB0
[ 113.485212] option 7-2:1.1: GSM modem (1-port) converter detected
[ 113.485256] usb 7-2: GSM modem (1-port) converter now attached to ttyUSB1
[ 113.485272] usbcore: registered new interface driver option
[ 113.485275] option: v0.7.2:USB Driver for GSM modems
[ 123.168022] wlan0: no IPv6 routers present
[ 369.892425] update-notifier[3469]: segfault at 1 ip b727f5eb sp bf8e8c3c error 4 in libc-2.9.so[b7208000+15c000]

Revision history for this message
Pablo Estigarribia (pablodav) said : 		#2

Uruguay no aparece más en la lista de países para conectar el modem!!!!!

¿Porqué esta regresión? ¿O es que están actualizando algo y falta terminar el trabajo aún?

Saludos!

Revision history for this message
Hely Suarez Marin (helysm) said : 		#3

tampoco veo a colombia en la lista, por que?

--
Atentamente,

Hely Suarez Marin
www.GOPENUX.com
Administrador Ubuntu Colombia
Miembro Grupo de Investigacion de Software Libre UFPS
Linux User # 478742
Ubuntu User # 24910
Cel. 300 - 5565244 314 - 2752309
Cúcuta

Revision history for this message
Rolando Blanco (rolando) said : 		#4

Revisa esto a ver si te sirve:

http://effiejayx.velugmaracaibo.org.ve/?p=237

Revision history for this message
Pablo Estigarribia (pablodav) said : 		#5

In latest updates it solved my problem!!

sudo dpkg -s network-manager
Package: network-manager
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2080
Maintainer: Ubuntu Core Dev Team <email address hidden>
Architecture: i386
Version: 0.7.1~rc4.1.cf199a964-0ubuntu1
Replaces: network-manager-pptp (<< 0.7~~)
Depends: libc6 (>= 2.4), libdbus-1-3 (>= 1.0.2), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.16.0), libhal1 (>= 0.5.8.1), libnl1, libnm-glib0 (>= 0.7.1~20090213+gitf142e15), libnm-util1 (>= 0.7.1~20090213+gitf142e15), libnspr4-0d (>= 4.7.0~1.9b1), libnss3-1d (>= 3.12.2~rc1), libpolkit-dbus2 (>= 0.7), libpolkit2 (>= 0.7), libudev0, libuuid1 (>= 1.05), iproute, iputils-arping, lsb-base (>= 3.2-14), wpasupplicant (>= 0.6.1~), dbus (>= 0.60), hal (>= 0.5.7.1), update-notifier-common, ppp
Recommends: network-manager-gnome | plasma-widget-network-manager, dnsmasq-base
Conflicts: network-manager-pptp (<< 0.7~~)
Conffiles:
 /etc/dbus-1/system.d/NetworkManager.conf 2ce93cbd2f7af2ef97abbbad2d45cc26
 /etc/dbus-1/system.d/nm-dhcp-client.conf 06b1ecfd8f1fa2a501a5f352e2e5e88e
 /etc/dbus-1/system.d/nm-dispatcher.conf 5711a76c31a3763750fe2c331741f679
 /etc/dbus-1/system.d/nm-system-settings.conf 71032e09b66ca8b74a82bf7b1dc5c724
 /etc/dbus-1/system.d/nm-avahi-autoipd.conf 91ab68968b0dc06c3a55b482b50b3028
 /etc/NetworkManager/dispatcher.d/01ifupdown 2bc1ae04a18972cd4b9acfaf6aa2104f
 /etc/NetworkManager/nm-system-settings.conf bc4a4aa7e1b84e080946bf081dd87eb0
 /etc/init.d/NetworkManager 61285233aa179086aabe30308c7e1bde
Description: network management framework daemon
 NetworkManager attempts to keep an active network connection available at all
 times. It is intended only for the desktop use-case, and is not intended for
 usage on servers. The point of NetworkManager is to make networking
 configuration and setup as painless and automatic as possible. If using DHCP,
 NetworkManager is _intended_ to replace default routes, obtain IP addresses
 from a DHCP server, and change nameservers whenever it sees fit.
 .
 This package provides the userspace daemons.
 .
  Homepage: http://www.gnome.org/projects/NetworkManager/
Original-Maintainer: Riccardo Setti <email address hidden>