Cannot find channles in MeTV
Hi
I am trying to configure MeTV to work with my Phiips DV-B Card (The card shows as a tda10046h in MeTV).
When I launch MeTV I see the scan wizard. From there I select the initial scan option and choose my location (uk-Nottingham) and the program scans for channels. However, after the scan there are no channels available.
I have used the inbuilt meter and have seen that that signal strength is 0% whilst the S/N Ratio is 100% - so this is obviously my problem....
I have run lspci and the output is as follows - I can't see any problems here:
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
00:07.0 Audio device: nVidia Corporation MCP72XE/
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:12.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:09.0 Multimedia controller: Philips Semiconductors SAA7131/
02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce 8200] (rev a2)
However, I have plugged a TV into the socket (using the same TV lead) and it works OK, meaning that there is a signal getting down the lead. Therefore the issue must be with the card, my build (Karmic) or MeTV. The Card works OK (albeit under Windows) and as far as I know I'm fully patched with my build. Therefore I am assuming that there is a problem with MeTV, which is stopping me from scanning for channels.
Can anyone provide me with any troubleshooting tips to resolve this issue?
Many thanks in advance.
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Can you help with this problem?
Provide an answer of your own, or ask steveb001 for more information if necessary.