rtl819xU:FirmwareRequest92S(): failed with TCR-Status: a -> rtl819xU:ERR!!! _rtl8192_up(): initialization is failed! -> Bus 001 Device 002: ID 7392:7622 Edimax Technology Co., Ltd -> Edimax EW-7622UMn wireless usb adapter not working on Ubuntu 10.10 using the r8192s_usb driver due to missing firmware
i have edimax EW-7622UMn and i cannot compile the driver..what shold i do plz ?
i have ubuntu 10.10
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- Ubuntu linux Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Related bugs
Related FAQ:
None Link to a FAQ
Revision history for this message
|
#1 |
Read this one - https:/
It's for an Edimax wi-fi card but I'd think the solution may be the same.
Also search the answers here for 'Edimax' - quite a few answers here
Revision history for this message
|
#2 |
this is the output of the terminal for the lines in the link you gave me
:
yuvalw@
Hit http://
Ign http://
Hit http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Reading package lists... Done
yuvalw@
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
hwinfo is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
yuvalw@
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:04:00.0
logical name: eth0
version: 01
serial: 00:1d:7d:0a:07:16
size: 100MB/s
capacity: 1GB/s
width: 64 bits
clock: 33MHz
resources: irq:44 ioport:
*-network DISABLED
description: Wireless interface
physical id: 1
logical name: wlan0
serial: 00:1f:1f:cd:98:b9
yuvalw@
yuvalw@
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
yuvalw@
auto lo
iface lo inet loopback
yuvalw@
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
yuvalw@
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02)
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02)
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G94 [GeForce 9600 GT] [10de:0622] (rev a1)
03:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
03:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 02)
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
05:06.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024]
yuvalw@
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:00f1 Microsoft Corp.
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 7392:7622 Edimax Technology Co., Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
yuvalw@
H/W path Device Class Description
=======
/0 bus EP35-DS4
/0/0 memory 128KiB BIOS
/0/4 processor Intel(R) Core(TM)2 Quad CPU Q6
/0/4/a memory 64KiB L1 cache
/0/4/b memory 4MiB L2 cache
/0/4/2.1 processor Logical CPU
/0/4/2.2 processor Logical CPU
/0/4/2.3 processor Logical CPU
/0/4/2.4 processor Logical CPU
/0/19 memory 4GiB System Memory
/0/19/0 memory 1GiB DIMM 800 MHz (1.2 ns)
/0/19/1 memory 1GiB DIMM 800 MHz (1.2 ns)
/0/19/2 memory 1GiB DIMM 800 MHz (1.2 ns)
/0/19/3 memory 1GiB DIMM 800 MHz (1.2 ns)
/0/1 processor
/0/1/2.1 processor Logical CPU
/0/1/2.2 processor Logical CPU
/0/1/2.3 processor Logical CPU
/0/1/2.4 processor Logical CPU
/0/2 processor
/0/2/2.1 processor Logical CPU
/0/2/2.2 processor Logical CPU
/0/2/2.3 processor Logical CPU
/0/2/2.4 processor Logical CPU
/0/3 processor
/0/3/2.1 processor Logical CPU
/0/3/2.2 processor Logical CPU
/0/3/2.3 processor Logical CPU
/0/3/2.4 processor Logical CPU
/0/100 bridge 82G33/G31/P35/P31 Express DRAM Co
/0/100/1 bridge 82G33/G31/P35/P31 Express PCI Exp
/0/100/1/0 display G94 [GeForce 9600 GT]
/0/100/1a bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Co
/0/100/1b multimedia 82801I (ICH9 Family) HD Audio Con
/0/100/1c bridge 82801I (ICH9 Family) PCI Express
/0/100/1c.4 bridge 82801I (ICH9 Family) PCI Express
/0/100/1c.4/0 storage JMB362/JMB363 Serial ATA Controll
/0/100/1c.4/0.1 scsi4 storage JMB362/JMB363 Serial ATA Controll
/0/100/
/0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express
/0/100/1c.5/0 eth0 network RTL8111/8168B PCI Express Gigabit
/0/100/1d bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Con
/0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Co
/0/100/1e bridge 82801 PCI Bridge
/0/100/1e/6 bus TSB43AB23 IEEE-1394a-2000 Control
/0/100/1f bridge 82801IR (ICH9R) LPC Interface Con
/0/100/1f.2 scsi1 storage 82801IR/IO/IH (ICH9R/DO/DH) 4 por
/0/100/1f.2/0.0.0 /dev/sda disk 320GB Hitachi HDP72503
/0/100/1f.2/0.0.0/1 /dev/sda1 volume 240GiB Windows NTFS volume
/0/100/1f.2/0.0.0/2 /dev/sda2 volume 57GiB Extended partition
/0/100/
/0/100/
/0/100/1f.3 bus 82801I (ICH9 Family) SMBus Contro
/0/100/1f.5 storage 82801I (ICH9 Family) 2 port SATA
/1 wlan0 network Wireless interface
yuvalw@
Linux yuvalw-EP35-DS4 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686 GNU/Linux
yuvalw@
[ 0.000000] found SMP MP-table at [c00f5130] f5130
[ 0.348146] ACPI: No dock devices found.
[ 0.368198] HEST: Table is not found!
[ 0.368431] usbcore: registered new interface driver usbfs
[ 0.368431] usbcore: registered new interface driver hub
[ 0.368431] usbcore: registered new device driver usb
[ 0.380018] Switching to clocksource tsc
[ 0.392124] pnp: PnP ACPI: found 13 devices
[ 0.446497] ERST: Table is not found!
[ 0.468130] hub 1-0:1.0: USB hub found
[ 0.488174] hub 2-0:1.0: USB hub found
[ 0.488442] hub 3-0:1.0: USB hub found
[ 0.488678] hub 4-0:1.0: USB hub found
[ 0.488888] hub 5-0:1.0: USB hub found
[ 0.489099] hub 6-0:1.0: USB hub found
[ 0.489320] hub 7-0:1.0: USB hub found
[ 0.489529] hub 8-0:1.0: USB hub found
[ 0.489647] PNP: No PS/2 controller found. Probing ports directly.
[ 0.490536] device-mapper: multipath: version 1.1.1 loaded
[ 0.490538] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.492159] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.793551] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.799574] isapnp: No Plug & Play device found
[ 1.387307] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.431738] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xf80c0000, 00:1d:7d:0a:07:16, XID 18000000 IRQ 44
[ 1.685210] usbcore: registered new interface driver hiddev
[ 1.699029] input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/
[ 1.699093] generic-usb 0003:045E:
[ 1.839711] input: Microsft Microsoft Wireless Desktop Receiver 3.1A as /devices/
[ 1.839803] generic-usb 0003:045E:
[ 1.839822] usbcore: registered new interface driver usbhid
[ 1.839824] usbhid: USB HID core driver
[ 10.869477] lp: driver loaded but no devices found
[ 10.910686] r8192s_usb: module is from the staging directory, the quality is unknown, you have been warned.
[ 11.095501] usbcore: registered new interface driver rtl819xU
[ 11.979577] rtl819xU:
[ 11.979827] rtl819xU:
[ 11.988780] rtl819xU:
[ 11.988953] rtl819xU:
[ 11.988956] rtl819xU:ERR!!! _rtl8192_up(): initialization is failed!
[ 11.990419] r8169 0000:04:00.0: eth0: link up
[ 11.990425] r8169 0000:04:00.0: eth0: link up
[ 12.009326] rtl819xU:
[ 12.009589] rtl819xU:
[ 12.018210] rtl819xU:
[ 12.018462] rtl819xU:
[ 12.018466] rtl819xU:ERR!!! _rtl8192_up(): initialization is failed!
[ 19.269405] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 22.728006] eth0: no IPv6 routers present
[ 172.069111] rtl819xU:
[ 172.069369] rtl819xU:
[ 172.077775] rtl819xU:
[ 172.077988] rtl819xU:
[ 172.077993] rtl819xU:ERR!!! _rtl8192_up(): initialization is failed!
yuvalw@
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 802.11b/g ESSID:"
Retry min limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
yuvalw@
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist twl4030_wdt
options iwlagn 11n_disable=1
yuvalw@
oops: don't know what to do with "netcard"
yuvalw@
> hal.1: read hal dataprocess 2110: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
31: PCI 400.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.WkkGS5m8Th0
Parent ID: HnsE.kaqynUDB2I3
SysFS ID: /devices/
SysFS BusID: 0000:04:00.0
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x1458 "Giga-byte Technology"
SubDevice: pci 0xe000 "GA-EP45-DS5 Motherboard"
Revision: 0x01
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xd000-0xdfff (rw)
Memory Range: 0xf9000000-
Memory Range: 0xfa900000-
IRQ: 44 (4312 events)
HW Address: 00:1d:7d:0a:07:16
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
55: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: ADDn.Sdkl8PQ3yqA
Parent ID: k4bc.cO89g+iefn1
SysFS ID: /devices/
SysFS BusID: 1-1:1.0
Hardware Class: network
Model: "Manufacturer Realtek RTL8192S WLAN Adapter"
Hotplug: USB
Vendor: usb 0x7392 "Manufacturer Realtek"
Device: usb 0x7622 "RTL8192S WLAN Adapter"
Revision: "2.00"
Serial ID: "00e04c000001"
Driver: "rtl819xU"
Driver Modules: "r8192s_usb"
Device File: wlan0
Features: WLAN
Speed: 480 Mbps
HW Address: 00:1f:1f:cd:98:b9
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462
WLAN bitrates: 1 2 5.5 11 6 9 12 18 24 36 48 54
WLAN encryption modes: TKIP CCMP
WLAN authentication modes: open wpa-psk wpa-eap
Module Alias: "usb:v7392p7622
Driver Info #0:
Driver Status: r8192s_usb is active
Driver Activation Cmd: "modprobe r8192s_usb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #47 (Hub)
yuvalw@
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
yuvalw@
Module Size Used by
binfmt_misc 6599 1
nvidia 9329739 38
snd_hda_
snd_hda_intel 22107 2
snd_hda_codec 87552 2 snd_hda_
snd_hwdep 5040 1 snd_hda_codec
snd_pcm 71475 2 snd_hda_
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
r8192s_usb 287340 0
snd_seq_midi_event 6047 1 snd_seq_midi
eeprom_93cx6 1345 1 r8192s_usb
snd_seq 47174 2 snd_seq_
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_
ppdev 5556 0
parport_pc 26058 1
snd 49038 13 snd_hda_
joydev 8767 0
psmouse 59033 0
intel_agp 26694 0
serio_raw 4022 0
agpgart 32011 2 nvidia,intel_agp
lp 7342 0
soundcore 880 1 snd
snd_page_alloc 7120 2 snd_hda_
parport 31492 3 ppdev,parport_pc,lp
firewire_ohci 21042 0
usbhid 36882 0
hid 67742 1 usbhid
r8169 36489 0
firewire_core 46643 1 firewire_ohci
ahci 19198 0
crc_itu_t 1383 1 firewire_core
pata_jmicron 1855 0
mii 4425 1 r8169
libahci 21664 1 ahci
yuvalw@
how i enable my wlan0 ,i try to compile the driver but when i get to the part to write "make"
i get this lines:
uvalw@yuvalw-
Desktop Pictures
Documents Public
Downloads rtl8712_
examples.desktop rtl8712_
make Templates
Music Videos
yuvalw@
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
rtl8712_
rtl8712_
rtl8712_
rtl8712_
tar: rtl8712_
tar: rtl8712_
tar: Exiting with failure status due to previous errors
yuvalw@
make: *** No targets specified and no makefile found. Stop.
yuvalw@
make: *** No targets specified and no makefile found. Stop.
yuvalw@
bash: ./make: Permission denied
yuvalw@
so plz help me :(
Revision history for this message
|
#3 |
Please try the solution from logari81 here:
https:/
No need to manually recompile the wireless driver.
Can you help with this problem?
Provide an answer of your own, or ask yuval for more information if necessary.