wireless adapter - Network controller [0280]: MEDIATEK Corp. Device [14c3:7630] - is not supported by the Linux kernel yet.
Hi!
I folowed these instructions https:/
marko@ubuntu:~$ sudo apt-get update; sudo apt-get install hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scan | egrep -i 'chan|ssid'; cat /etc/network/
[sudo] password for marko:
Get:1 http://
Hit http://
Get:2 http://
Get:3 http://
Hit http://
Get:4 http://
Get:5 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:6 http://
Get:7 http://
Get:8 http://
Get:9 http://
Get:10 http://
Get:11 http://
Get:12 http://
Get:13 http://
Get:14 http://
Get:15 http://
Get:16 http://
Get:17 http://
Get:18 http://
Hit http://
Hit http://
Get:19 http://
Get:20 http://
Get:21 http://
Get:22 http://
Get:23 http://
Get:24 http://
Get:25 http://
Get:26 http://
Get:27 http://
Get:28 http://
Get:29 http://
Get:30 http://
Hit http://
Hit http://
Hit http://
Hit http://
Get:31 http://
Hit http://
Hit http://
Get:32 http://
Fetched 3,893 kB in 6s (635 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
The following NEW packages will be installed:
hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 54 not upgraded.
Need to get 769 kB of archives.
After this operation, 2,246 kB of additional disk space will be used.
Get:1 http://
Get:2 http://
Get:3 http://
Fetched 769 kB in 1s (539 kB/s)
Selecting previously unselected package libhal1.
(Reading database ... 172144 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_
Selecting previously unselected package libhd16.
Unpacking libhd16 (from .../libhd16_
Selecting previously unselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-8) ...
Setting up libhd16 (16.0-2.1) ...
Setting up hwinfo (16.0-2.1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
*-network UNCLAIMED
description: Network controller
product: MEDIATEK Corp.
vendor: MEDIATEK Corp.
physical id: 0
bus info: pci@0000:03:00.0
version: 00
width: 32 bits
clock: 33MHz
resources: memory:
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0.2
bus info: pci@0000:04:00.2
logical name: eth0
version: 0a
serial: e0:3f:49:38:49:b5
size: 100Mbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
resources: irq:43 ioport:
0: asus-wlan: Wireless LAN
Soft blocked: yes
Hard blocked: no
1: asus-bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
eth0 Interface doesn't support scanning.
lo Interface doesn't support scanning.
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
03:00.0 Network controller [0280]: MEDIATEK Corp. Device [14c3:7630]
Subsystem: Foxconn International, Inc. Device [105b:e074]
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device [10ec:5289] (rev 01)
--
04:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a)
Subsystem: ASUSTeK Computer Inc. Device [1043:200f]
Kernel driver in use: r8169
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 005: ID 09da:000a A4 Tech Co., Ltd Optical Mouse Opto 510D
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 0489:e069 Foxconn / Hon Hai
Bus 001 Device 004: ID 04f2:b40a Chicony Electronics Co., Ltd
RUNNING STATE WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN
running connected enabled disabled enabled enabled
H/W path Device Class Description
=======
/0 bus X550VC
/0/0 memory 64KiB BIOS
/0/8 memory 512KiB L2 cache
/0/9 memory 128KiB L1 cache
/0/a memory 3MiB L3 cache
/0/b memory 4GiB System Memory
/0/b/0 memory 4GiB SODIMM DDR3 Synchronous 1600 MH
/0/b/1 memory DIMM [empty]
/0/b/2 memory DIMM [empty]
/0/b/3 memory DIMM [empty]
/0/c processor Intel(R) Core(TM) i3-3110M CPU @ 2.4
/0/100 bridge 3rd Gen Core processor DRAM Controll
/0/100/1 bridge Xeon E3-1200 v2/3rd Gen Core process
/0/100/1/0 display GF117M [GeForce 610M/710M / GT 620M/
/0/100/2 display 3rd Gen Core processor Graphics Cont
/0/100/14 bus 7 Series/C210 Series Chipset Family
/0/100/16 communication 7 Series/C210 Series Chipset Family
/0/100/1a bus 7 Series/C210 Series Chipset Family
/0/100/1b multimedia 7 Series/C210 Series Chipset Family
/0/100/1c bridge 7 Series/C210 Series Chipset Family
/0/100/1c.1 bridge 7 Series/C210 Series Chipset Family
/0/100/1c.1/0 network MEDIATEK Corp.
/0/100/1c.3 bridge 7 Series/C210 Series Chipset Family
/0/100/1c.3/0 generic Realtek Semiconductor Co., Ltd.
/0/100/1c.3/0.2 eth0 network RTL8111/8168/8411 PCI Express Gigabi
/0/100/1d bus 7 Series/C210 Series Chipset Family
/0/100/1f bridge HM76 Express Chipset LPC Controller
/0/100/1f.2 storage 7 Series Chipset Family 6-port SATA
/0/100/1f.3 bus 7 Series/C210 Series Chipset Family
/0/1 scsi0 storage
/0/1/0.0.0 /dev/sda disk 1TB HGST HTS541010A9
/0/1/0.0.0/1 /dev/sda1 volume 100MiB Windows NTFS volume
/0/1/0.0.0/2 /dev/sda2 volume 120GiB Windows NTFS volume
/0/1/0.0.0/3 /dev/sda3 volume 40GiB Windows NTFS volume
/0/1/0.0.0/4 /dev/sda4 volume 771GiB Windows NTFS volume
/0/2 scsi2 storage
/0/2/0.0.0 /dev/cdrom disk DVD A DA8A5SH
Linux ubuntu 3.11.0-18-generic #32~precise1-Ubuntu SMP Thu Feb 20 17:52:10 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
[ 0.000000] No AGP bridge found
[ 0.000000] found SMP MP-table at [mem 0x000fd7f0-
[ 0.000000] No NUMA configuration found
[ 0.000000] No AGP bridge found
[ 0.137521] ACPI: EC: EC description table is found, configuring boot EC
[ 0.247823] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.292543] ACPI: No dock devices found.
[ 0.541529] Found 1 acpi root devices
[ 0.541878] usbcore: registered new interface driver usbfs
[ 0.541885] usbcore: registered new interface driver hub
[ 0.541904] usbcore: registered new device driver usb
[ 0.545886] Switched to clocksource hpet
[ 0.602906] pnp: PnP ACPI: found 14 devices
[ 0.954407] input: Lid Switch as /devices/
[ 0.978316] ACPI: Lid Switch [LID]
[ 0.998308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.998310] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.998311] usb usb1: Product: EHCI Host Controller
[ 0.998313] usb usb1: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[ 0.998314] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.998400] hub 1-0:1.0: USB hub found
[ 1.014316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.014318] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.014320] usb usb2: Product: EHCI Host Controller
[ 1.014321] usb usb2: Manufacturer: Linux 3.11.0-18-generic ehci_hcd
[ 1.014323] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.014467] hub 2-0:1.0: USB hub found
[ 1.014829] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.014831] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.014832] usb usb3: Product: xHCI Host Controller
[ 1.014834] usb usb3: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
[ 1.014835] usb usb3: SerialNumber: 0000:00:14.0
[ 1.014907] hub 3-0:1.0: USB hub found
[ 1.015002] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.015004] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.015005] usb usb4: Product: xHCI Host Controller
[ 1.015007] usb usb4: Manufacturer: Linux 3.11.0-18-generic xhci_hcd
[ 1.015008] usb usb4: SerialNumber: 0000:00:14.0
[ 1.015073] hub 4-0:1.0: USB hub found
[ 1.035593] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 5465b24ef2efe2a
[ 1.041242] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.205973] r8169 0000:04:00.2 eth0: RTL8411 at 0xffffc9000061a000, e0:3f:49:38:49:b5, XID 08800800 IRQ 43
[ 1.205978] r8169 0000:04:00.2 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.310570] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.443048] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.443055] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.443297] hub 1-1:1.0: USB hub found
[ 1.554781] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.687256] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.687263] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.687510] hub 2-1:1.0: USB hub found
[ 1.759065] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 1.866140] usb 1-1.1: New USB device found, idVendor=0489, idProduct=e069
[ 1.866146] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.866150] usb 1-1.1: Product: BT
[ 1.866153] usb 1-1.1: Manufacturer: MediaTek
[ 1.866155] usb 1-1.1: SerialNumber: 1.0
[ 1.935220] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 2.064580] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b40a
[ 2.064587] usb 1-1.3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.064591] usb 1-1.3: Product: USB2.0 HD UVC WebCam
[ 2.064594] usb 1-1.3: Manufacturer: Chicony Electronics Co.,Ltd.
[ 2.064610] usb 1-1.3: SerialNumber: 0x0001
[ 2.912075] Switched to clocksource tsc
[ 5.262461] IPv6: ADDRCONF(
[ 7.946033] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 8.161862] lp: driver loaded but no devices found
[ 8.479150] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b40a)
[ 8.480545] input: USB2.0 HD UVC WebCam as /devices/
[ 8.480733] usbcore: registered new interface driver uvcvideo
[ 8.961014] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 9.667884] ACPI Warning: \_SB_.PCI0.
[ 9.730126] ACPI Warning: \_SB_.PCI0.
[ 9.730156] ACPI Error: Needed [Buffer/
[ 9.730163] ACPI Error: Method parse/execution failed [\_SB_.
[ 9.730172] ACPI Warning: \_SB_.PCI0.
[ 9.730235] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.GFX0 handle
[ 10.450419] Console: switching to colour frame buffer device 170x48
[ 10.542384] nouveau [ VBIOS][
[ 10.542451] nouveau [ VBIOS][
[ 10.685981] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/
[ 10.686071] input: HDA Intel PCH Headphone as /devices/
[ 10.919063] nouveau [ VBIOS][
[ 11.036957] vga_switcheroo: enabled
[ 13.199662] r8169 0000:04:00.2 eth0: link down
[ 13.199690] r8169 0000:04:00.2 eth0: link down
[ 13.199719] IPv6: ADDRCONF(
[ 13.199971] IPv6: ADDRCONF(
[ 14.923251] r8169 0000:04:00.2 eth0: link up
[ 14.923260] IPv6: ADDRCONF(
[ 47.034748] type=1400 audit(139738982
[ 67.006508] usb 3-3: new low-speed USB device number 2 using xhci_hcd
[ 67.027799] usb 3-3: New USB device found, idVendor=09da, idProduct=000a
[ 67.027806] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 67.027810] usb 3-3: Product: USB Mouse
[ 67.027813] usb 3-3: Manufacturer: A4Tech
[ 67.027958] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 67.104615] usbcore: registered new interface driver usbhid
[ 67.104618] usbhid: USB HID core driver
[ 67.108211] input: A4Tech USB Mouse as /devices/
[ 67.108318] a4tech 0003:09DA:
[ 124.054000] r8169 0000:04:00.2 eth0: link down
[ 124.054034] r8169 0000:04:00.2 eth0: link down
[ 124.054087] IPv6: ADDRCONF(
[ 126.397158] r8169 0000:04:00.2 eth0: link up
[ 126.397175] IPv6: ADDRCONF(
[ 190.630389] usb 3-3: USB disconnect, device number 2
[ 353.111190] r8169 0000:04:00.2 eth0: link down
[ 357.510768] IPv6: ADDRCONF(
[ 365.856434] ACPI Error: Method parse/execution failed [\_GPE._L09] (Node ffff880128e8c988), AE_AML_
[ 365.856452] ACPI Exception: AE_AML_
[ 365.859083] r8169 0000:04:00.2 eth0: link down
[ 366.884085] r8169 0000:04:00.2 eth0: link up
[ 366.884099] IPv6: ADDRCONF(
[ 389.622566] usb 3-2: new low-speed USB device number 3 using xhci_hcd
[ 389.643923] usb 3-2: New USB device found, idVendor=09da, idProduct=000a
[ 389.643931] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 389.643935] usb 3-2: Product: USB Mouse
[ 389.643938] usb 3-2: Manufacturer: A4Tech
[ 389.644210] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 389.646987] input: A4Tech USB Mouse as /devices/
[ 389.647469] a4tech 0003:09DA:
[ 413.055723] usb 3-2: USB disconnect, device number 3
[ 461.023626] usb 3-2: new high-speed USB device number 4 using xhci_hcd
[ 461.045593] usb 3-2: New USB device found, idVendor=13fe, idProduct=3623
[ 461.045601] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 461.045605] usb 3-2: Product: USB DISK Pro
[ 461.045608] usb 3-2: Manufacturer:
[ 461.045611] usb 3-2: SerialNumber: 07A81F07212C8784
[ 461.203584] usb 3-2: USB disconnect, device number 4
[ 461.361458] usbcore: registered new interface driver usb-storage
[ 467.329815] usb 3-3: new low-speed USB device number 5 using xhci_hcd
[ 467.351344] usb 3-3: New USB device found, idVendor=09da, idProduct=000a
[ 467.351353] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 467.351357] usb 3-3: Product: USB Mouse
[ 467.351360] usb 3-3: Manufacturer: A4Tech
[ 467.351604] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 467.354336] input: A4Tech USB Mouse as /devices/
[ 467.354801] a4tech 0003:09DA:
Release Date: 10/16/2013
Serial services are supported (int 14h)
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: X550VC
Serial Number: DCN0WU11581051A
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: X550VC
Serial Number: BSN123456789012
Manufacturer: ASUSTeK COMPUTER INC.
Serial Number: DCN0WU11581051A
Manufacturer: Intel(R) Corporation
Serial Number: Not Specified
Manufacturer: Hynix/Hyundai
Serial Number: 00000000
Manufacturer: [Empty]
Serial Number: [Empty]
Manufacturer: [Empty]
Serial Number: [Empty]
Manufacturer: [Empty]
Serial Number: [Empty]
eth0 no wireless extensions.
lo no wireless extensions.
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
WimaxEnabled=true
> hal.1: read hal dataprocess 2795: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
23: PCI 300.0: 0280 Network controller
[Created at pci.318]
Unique ID: svHJ.I4KvnxhlSdD
Parent ID: qTvu.QZoBy3KI3IF
SysFS ID: /devices/
SysFS BusID: 0000:03:00.0
Hardware Class: network
Model: "MEDIATEK Network controller"
Vendor: pci 0x14c3 "MEDIATEK Corp."
Device: pci 0x7630
SubVendor: pci 0x105b "Foxconn International, Inc."
SubDevice: pci 0xe074
Memory Range: 0xf7900000-
IRQ: 3 (no events)
Module Alias: "pci:v000014C3d
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
25: PCI 400.2: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.+zcDAZByzE1
Parent ID: Z7uZ.UDaBtLo6Aq0
SysFS ID: /devices/
SysFS BusID: 0000:04:00.2
Hardware Class: network
Model: "Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller"
Vendor: pci 0x10ec "Realtek Semiconductor Co., Ltd."
Device: pci 0x8168 "RTL8111/8168B PCI Express Gigabit Ethernet controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x200f
Revision: 0x0a
Driver: "r8169"
Driver Modules: "r8169"
Device File: eth0
I/O Ports: 0xd000-0xdfff (rw)
Memory Range: 0xf2104000-
Memory Range: 0xf2100000-
IRQ: 43 (11301 events)
HW Address: e0:3f:49:38:49:b5
Link detected: yes
Module Alias: "pci:v000010ECd
Driver Info #0:
Driver Status: r8169 is active
Driver Activation Cmd: "modprobe r8169"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #17 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 999 0.0 0.1 243832 6096 ? Ssl 13:49 0:00 NetworkManager
root 2142 0.0 0.0 7272 1568 ? S 13:55 0:00 /sbin/dhclient -d -4 -sf /usr/lib/
nobody 2145 0.0 0.0 27548 1516 ? S 13:55 0:00 /usr/sbin/dnsmasq --no-resolv --keep-
marko 2807 0.0 0.0 8112 932 pts/0 S+ 14:03 0:00 egrep --color=auto wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1
total 66892
47105 drwxr-xr-x 3 root root 1024 Mar 24 19:56 .
2 drwxr-xr-x 24 root root 1024 Mar 24 19:55 ..
47107 -rw-r--r-- 1 root root 1004128 Jan 30 19:05 abi-3.11.
47163 -rw-r--r-- 1 root root 1005275 Feb 20 19:16 abi-3.11.
47110 -rw-r--r-- 1 root root 163254 Jan 30 19:05 config-
47164 -rw-r--r-- 1 root root 163267 Feb 20 19:16 config-
52225 drwxr-xr-x 3 root root 7168 Mar 24 19:56 grub
2596865 -rw-r--r-- 1 root root 17464581 Mar 24 19:50 initrd.
2596866 -rw-r--r-- 1 root root 17469310 Mar 24 19:55 initrd.
47108 -rw-r--r-- 1 root root 176764 Nov 27 2011 memtest86+.bin
47109 -rw-r--r-- 1 root root 178944 Nov 27 2011 memtest86+
47111 -rw------- 1 root root 3466482 Jan 30 19:05 System.
47165 -rw------- 1 root root 3469114 Feb 20 19:16 System.
47112 -rw------- 1 root root 5906912 Jan 30 19:05 vmlinuz-
47113 -rw------- 1 root root 5908824 Feb 4 12:10 vmlinuz-
47162 -rw------- 1 root root 5910112 Feb 20 19:16 vmlinuz-
2596867 -rw------- 1 root root 5912024 Mar 24 19:56 vmlinuz-
Support status summary of 'ubuntu':
You have 8 packages (0.6%) supported until October 2013 (18m)
You have 1319 packages (91.7%) supported until April 2017 (5y)
You have 60 packages (4.2%) supported until October 2015 (18m)
You have 0 packages (0.0%) that can not/no-longer be downloaded
You have 51 packages (3.5%) that are unsupported
Run with --show-unsupported, --show-supported or --show-all to see more details
Module Size Used by
usb_storage 66567 0
hid_a4tech 12685 0
usbhid 53329 0
hid 106315 2 hid_a4tech,usbhid
snd_hda_codec_hdmi 41773 1
snd_hda_
nouveau 979931 1
snd_hda_intel 57134 3
i915 688399 3
snd_hda_codec 194817 3 snd_hda_
joydev 17613 0
ttm 84837 1 nouveau
bnep 24107 2
snd_hwdep 13613 1 snd_hda_codec
snd_pcm 107140 3 snd_hda_
drm_kms_helper 53237 2 nouveau,i915
rfcomm 74718 0
snd_seq_midi 13324 0
drm 306660 7 nouveau,
snd_rawmidi 30416 1 snd_seq_midi
uvcvideo 82247 0
bluetooth 391726 10 bnep,rfcomm
snd_seq_midi_event 14899 1 snd_seq_midi
parport_pc 32866 0
snd_seq 66061 2 snd_seq_
ppdev 17711 0
videobuf2_core 40815 1 uvcvideo
snd_timer 29989 2 snd_pcm,snd_seq
lp 17799 0
mei_me 18418 0
asus_nb_wmi 16990 0
i2c_algo_bit 13564 2 nouveau,i915
videodev 138562 2 uvcvideo,
snd_seq_device 14497 3 snd_seq_
mei 78537 1 mei_me
asus_wmi 24794 1 asus_nb_wmi
psmouse 104093 0
lpc_ich 21163 0
videobuf2_vmalloc 13216 1 uvcvideo
parport 42466 3 parport_pc,ppdev,lp
rtsx_pci_ms 18320 0
sparse_keymap 13890 1 asus_wmi
videobuf2_memops 13362 1 videobuf2_vmalloc
snd 73753 17 snd_hda_
mxm_wmi 13021 1 nouveau
serio_raw 13413 0
mac_hid 13253 0
video 19574 3 nouveau,
soundcore 12680 1 snd
memstick 16811 1 rtsx_pci_ms
wmi 19256 3 nouveau,
snd_page_alloc 18798 2 snd_hda_
rtsx_pci_sdmmc 23933 0
ahci 30063 2
libahci 32118 1 ahci
r8169 73299 0
mii 13981 1 r8169
rtsx_pci 45723 2 rtsx_pci_
marko@ubuntu:~$ rtsx_pci_sdmmc 23933 0
rtsx_pci_sdmmc: command not found
marko@ubuntu:~$
Question information
- Language:
- English Edit question
- Status:
- Open
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
Can you help with this problem?
Provide an answer of your own, or ask hoio for more information if necessary.