b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found -> DISABLED Wireless Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 03) not working on Dell Inspiron 2200 in Ubuntu 10.10
I just installed 10.10 on my old Dell Inspiron 2200 and cannot seem to get the wireless card to work. Previously this laptop was shipped with no wireless card installed in it at all. I ordered the Dell Broadcom 1450 mini PCI wireless card and need to install the drivers for it. However, the only drivers for this card seem to be for windows xp only. Is there any way I can get a driver to work on this machine? The on-board LAN (hardline connection) works fine, but I need the wireless to work as well. Can someone please help me, it would be much appreciated. Thank you.
Question information
- Language:
- English Edit question
- Status:
- Solved
- Assignee:
- No assignee Edit question
- Solved by:
- Mark Rijckenberg
- Solved:
- Last query:
- Last reply:
Revision history for this message
|
#1 |
Can you give the output of:
sudo lshw -C network; lsb_release -a; sudo rfkill list; dmesg | grep -i firm
Thanks
Revision history for this message
|
#2 |
Hi,
Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).
In order to gather essential troubleshooting information about your wireless card, please follow this procedure:
Step 1:
If you are using the Gnome interface, open the Terminal console via "Applications-
If you are using the Unity interface, the easiest way to open the Terminal is to use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.
So the methods in Unity are:
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal
Step 2: Please copy-paste the following command from https:/
Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!
sudo apt-get update; sudo apt-get install hwinfo grep; sudo lshw -C network; rfkill list; sudo iwlist scanning; cat /etc/network/
Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.
Regards,
Mark
Revision history for this message
|
#3 |
Get:1 http://
Ign http://
Get:2 http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Get:3 http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Get:4 http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Hit http://
Ign http://
Ign http://
Hit http://
Hit http://
Hit http://
Fetched 2,795B in 4s (684B/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
The following extra packages will be installed:
libhal1 libhd16
The following NEW packages will be installed:
hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 849kB of archives.
After this operation, 2,286kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://
Get:2 http://
Get:3 http://
Fetched 849kB in 1s (492kB/s)
Selecting previously deselected package libhal1.
(Reading database ... 155245 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_
Selecting previously deselected package libhd16.
Unpacking libhd16 (from .../libhd16_
Selecting previously deselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-0ubuntu6) ...
Setting up libhd16 (16.0-2) ...
Setting up hwinfo (16.0-2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
*-network:0
description: Network controller
product: BCM4309 802.11a/b/g
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:02:03.0
version: 03
width: 32 bits
clock: 33MHz
resources: irq:19 memory:
*-network:1
description: Ethernet interface
product: 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:02:08.0
logical name: eth0
version: 03
serial: 00:12:3f:03:cc:0e
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
resources: irq:20 memory:
*-network DISABLED
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:0b:7d:25:0c:fd
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wlan0 Interface doesn't support scanning : Network is down
auto lo
iface lo inet loopback
DISTRIB_ID=Ubuntu
DISTRIB_
DISTRIB_
DISTRIB_
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 03)
00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d3)
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801FB/
00:1e.3 Modem [0703]: Intel Corporation 82801FB/
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/
02:01.0 CardBus bridge [0607]: Texas Instruments PCI1510 PC card Cardbus Controller [104c:ac56]
02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 03)
02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 03)
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
H/W path Device Class Description
=======
/0 bus 0U6962
/0/0 memory 64KiB BIOS
/0/400 processor Intel(R) Celeron(R) M processo
/0/400/700 memory 8KiB L1 cache
/0/400/701 memory 1MiB L2 cache
/0/1000 memory 512MiB System Memory
/0/1000/0 memory 256MiB Chip DDR Synchronous 33
/0/1000/1 memory 256MiB DIMM DDR Synchronous 33
/0/100 bridge Mobile 915GM/PM/GMS/910GML Exp
/0/100/2 display Mobile 915GM/GMS/910GML Expres
/0/100/2.1 display Mobile 915GM/GMS/910GML Expres
/0/100/1d bus 82801FB/
/0/100/1d.1 bus 82801FB/
/0/100/1d.2 bus 82801FB/
/0/100/1d.3 bus 82801FB/
/0/100/1d.7 bus 82801FB/
/0/100/1e bridge 82801 Mobile PCI Bridge
/0/100/1e/1 bridge PCI1510 PC card Cardbus Contro
/0/100/1e/3 network BCM4309 802.11a/b/g
/0/100/1e/8 eth0 network 82562ET/EZ/GT/GZ - PRO/100 VE
/0/100/1e.2 multimedia 82801FB/
/0/100/1e.3 communication 82801FB/
/0/100/1f bridge 82801FBM (ICH6M) LPC Interface
/0/100/1f.1 scsi0 storage 82801FB/
/0/100/1f.1/0.0.0 /dev/sda disk 60GB FUJITSU MHV2060A
/0/100/1f.1/0.0.0/1 /dev/sda1 volume 54GiB EXT4 volume
/0/100/1f.1/0.0.0/2 /dev/sda2 volume 1495MiB Extended partition
/0/100/
/0/100/1f.1/0.1.0 /dev/cdrom disk CDRW/DVD CDD5263
/0/100/1f.3 bus 82801FB/
/1 power DELL54SSN
/2 wlan0 network Wireless interface
Linux stevenshown-
[ 0.009836] SMP alternatives: switching to UP code
[ 0.096504] ACPI: No dock devices found.
[ 0.167459] HEST: Table is not found!
[ 0.167982] usbcore: registered new interface driver usbfs
[ 0.168015] usbcore: registered new interface driver hub
[ 0.168054] usbcore: registered new device driver usb
[ 0.172026] Switching to clocksource tsc
[ 0.229417] pnp: PnP ACPI: found 12 devices
[ 0.268344] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.759246] input: Lid Switch as /devices/
[ 0.759852] ACPI: Lid Switch [LID]
[ 0.764628] Switching to clocksource hpet
[ 0.772062] ERST: Table is not found!
[ 0.901763] hub 1-0:1.0: USB hub found
[ 0.902254] hub 2-0:1.0: USB hub found
[ 0.902607] hub 3-0:1.0: USB hub found
[ 0.902983] hub 4-0:1.0: USB hub found
[ 0.903353] hub 5-0:1.0: USB hub found
[ 0.952390] device-mapper: multipath: version 1.1.1 loaded
[ 0.952394] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.087319] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.175654] isapnp: No Plug & Play device found
[ 1.662533] e100 0000:02:08.0: eth0: addr 0xdfdfd000, irq 20, MAC addr 00:12:3f:03:cc:0e
[ 1.663986] b43-pci-bridge 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.664085] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
[ 1.664095] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
[ 1.664103] ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
[ 1.664112] ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
[ 1.664121] ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
[ 1.667865] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
[ 18.934260] lp: driver loaded but no devices found
[ 19.255683] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.
[ 19.628365] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01a4]
[ 20.118126] b43-phy0: Broadcom 4306 WLAN found (core revision 5)
[ 20.884386] Registered led device: b43-phy0::tx
[ 20.884412] Registered led device: b43-phy0::rx
[ 20.884442] Registered led device: b43-phy0::radio
[ 20.884553] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 21.658976] Console: switching to colour frame buffer device 128x48
[ 21.873857] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 21.873949] b43-phy0 ERROR: Firmware file "b43-open/
[ 21.874028] b43-phy0 ERROR: You must go to http://
[ 21.897130] ADDRCONF(
[ 21.900170] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[ 21.900385] ADDRCONF(
Manufacturer: Dell Inc.
Product Name: Inspiron 2200
Manufacturer: Dell Inc.
Product Name: 0U6962
Manufacturer: Dell Inc.
Manufacturer: Intel
Manufacturer: Not Specified
Manufacturer: 7F7F7F0B00000000
Manufacturer: Sanyo
SBDS Manufacture Date: 2005-04-28
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt
options iwlagn 11n_disable=1
[main]
NetworkingEnabl
WirelessEnabled
WWANEnabled=true
> hal.1: read hal dataprocess 1903: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file dbus-errors.c line 280.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
23: PCI 203.0: 0282 WLAN controller
[Created at pci.318]
Unique ID: y9sn.zxnhFsu6a71
Parent ID: 6NW+.Po6Q64fYxp8
SysFS ID: /devices/
SysFS BusID: 0000:02:03.0
Hardware Class: network
Model: "Dell Truemobile 1450 MiniPCI"
Vendor: pci 0x14e4 "Broadcom"
Device: pci 0x4324 "BCM4309 802.11a/b/g"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x0003 "Truemobile 1450 MiniPCI"
Revision: 0x03
Driver: "b43-pci-bridge"
Driver Modules: "ssb"
Device File: wlan0
Features: WLAN
Memory Range: 0xdfdfe000-
IRQ: 19 (no events)
HW Address: 00:0b:7d:25:0c:fd
Link detected: yes
WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
WLAN encryption modes: WEP40 WEP104 TKIP CCMP
WLAN authentication modes: open sharedkey wpa-psk wpa-eap
Module Alias: "pci:v000014E4d
Driver Info #0:
Driver Status: ssb is active
Driver Activation Cmd: "modprobe ssb"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
24: PCI 208.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.iiphW6a6u0D
Parent ID: 6NW+.Po6Q64fYxp8
SysFS ID: /devices/
SysFS BusID: 0000:02:08.0
Hardware Class: network
Model: "Intel 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1068 "82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile"
SubVendor: pci 0x1028 "Dell"
SubDevice: pci 0x01a4
Revision: 0x03
Driver: "e100"
Driver Modules: "e100"
Device File: eth0
Memory Range: 0xdfdfd000-
I/O Ports: 0xdf40-0xdf7f (rw)
IRQ: 20 (7814 events)
HW Address: 00:12:3f:03:cc:0e
Link detected: yes
Module Alias: "pci:v00008086d
Driver Info #0:
Driver Status: e100 is active
Driver Activation Cmd: "modprobe e100"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #16 (PCI bridge)
Warning: bad ps syntax, perhaps a bogus '-'? See http://
root 722 0.0 0.6 19140 3184 ? Ssl 11:35 0:00 NetworkManager
root 874 0.0 0.1 2296 648 ? S 11:35 0:00 /sbin/dhclient -d -sf /usr/lib/
1000 1917 0.0 0.1 4012 728 pts/0 S+ 11:42 0:00 egrep --color=auto icd|etwork
Module Size Used by
parport_pc 26058 0
ppdev 5556 0
binfmt_misc 6599 1
joydev 8767 0
snd_intel8x0 25664 2
snd_ac97_codec 99227 1 snd_intel8x0
ac97_bus 1014 1 snd_ac97_codec
arc4 1165 2
snd_pcm 71475 2 snd_intel8x0,
i915 295819 4
b43 168681 0
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
mac80211 231927 1 b43
pcmcia 35973 0
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_
drm_kms_helper 30136 1 i915
drm 168092 4 i915,drm_kms_helper
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_
intel_agp 26566 2 i915
dell_laptop 5730 0
yenta_socket 21518 0
cfg80211 144822 2 b43,mac80211
snd 49102 11 snd_intel8x0,
dcdbas 5402 1 dell_laptop
pcmcia_rsrc 10566 1 yenta_socket
psmouse 59033 0
pcmcia_core 14657 3 pcmcia,
i2c_algo_bit 5168 1 i915
video 18712 1 i915
soundcore 880 1 snd
led_class 2633 1 b43
serio_raw 4022 0
snd_page_alloc 7120 2 snd_intel8x0,
agpgart 32011 2 drm,intel_agp
output 1883 1 video
lp 7342 0
parport 31492 3 parport_pc,ppdev,lp
e100 30356 0
ssb 39320 1 b43
mii 4425 1 e100
stevenshown@
Revision history for this message
|
#4 |
And Actionparsnip, here's the output of the command you said to run:
CI (sysfs)
*-network:0
description: Network controller
product: BCM4309 802.11a/b/g
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:02:03.0
version: 03
width: 32 bits
clock: 33MHz
resources: irq:19 memory:
*-network:1
description: Ethernet interface
product: 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:02:08.0
logical name: eth0
version: 03
serial: 00:12:3f:03:cc:0e
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
resources: irq:20 memory:
*-network DISABLED
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:0b:7d:25:0c:fd
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 10.10
Release: 10.10
Codename: maverick
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[ 0.268344] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 19.255683] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.
[ 20.884553] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 21.873857] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 21.873949] b43-phy0 ERROR: Firmware file "b43-open/
[ 21.874028] b43-phy0 ERROR: You must go to http://
stevenshown@
stevenshown@
stevenshown@
Hopefully all this information will be of help. Thanks.
Revision history for this message
|
#5 |
And Actionparsnip, here's the output of the command you said to run:
CI (sysfs)
*-network:0
description: Network controller
product: BCM4309 802.11a/b/g
vendor: Broadcom Corporation
physical id: 3
bus info: pci@0000:02:03.0
version: 03
width: 32 bits
clock: 33MHz
resources: irq:19 memory:
*-network:1
description: Ethernet interface
product: 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:02:08.0
logical name: eth0
version: 03
serial: 00:12:3f:03:cc:0e
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
resources: irq:20 memory:
*-network DISABLED
description: Wireless interface
physical id: 2
logical name: wlan0
serial: 00:0b:7d:25:0c:fd
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 10.10
Release: 10.10
Codename: maverick
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
[ 0.268344] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 19.255683] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.
[ 20.884553] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 21.873857] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 21.873949] b43-phy0 ERROR: Firmware file "b43-open/
[ 21.874028] b43-phy0 ERROR: You must go to http://
stevenshown@
stevenshown@
stevenshown@
Hopefully all this information will be of help. Thanks.
Revision history for this message
|
#6 |
Revision history for this message
|
#7 |
Hi,
You need to install the following Broadcom driver package using apt-get
or Synaptic package manager: bcmwl-kernel-source
This will of course require a working wirED Internet connection in
Ubuntu. (wired, not wireless)
For example: using the Terminal, you need to run the following commands
to install bcmwl-kernel-
sudo apt-get update
sudo apt-get install bcmwl-kernel-source
Then reboot and retest wireless using Network Manager.
A similar explanation can be found at the end of this thread:
https:/
Wireless adapters with PCI-ID 14e4:4324 (like your wireless adapter) require the installation of the wl driver, which means you need to install the bcmwl-kernel-source package.
Regards,
Mark
Revision history for this message
|
#8 |
Ok, I followed the steps both of you said to do, and installed the driver packages and restarted my computer, but now instead of the network manager telling me the firmware is missing, it don't even acknowledge the presence of a wireless device at all, let alone activate it. I need more assistance with this matter. Thank you.
Revision history for this message
|
#9 |
These symptoms (not showing wireless adapter anymore) seem very similar to the symptoms described in the following thread:
https:/
Please try the very last suggestion in that thread:
I quote:
"
g scoville (gscoville) said on 2011-01-25: #9
I reinstalled Ubuntu with hard wire connected to internet. was prompted for driver update for my router. All is working well now.
"
Revision history for this message
|
#10 |
Thank you Mark, I did as you suggested and tried the very last suggestion in that thread, which was to re-install Ubuntu. And just like in that thread, this corrected my problem. My wireless card is now working exactly as it should. Thank you for helping me solve this problem.
Steven
Revision history for this message
|
#11 |
Thanks Mark Rijckenberg, that solved my question.