Internal Laptop Bluetooth is not working. Very delayed boot up in 10.04
Am using Dell Inspiron 1545 in which it has its own bluetooth.
In 9.10 also bluetooth doesn't works and so i installed 10.04 but now also its not working.
Also 10.04 boots in a very slow manner. It tooks about 40 - 50 secs to show log in screen, till that a cursor blinks.
Provide any ideas to solve these problems.
Thanks in advance.
Question information
- Language:
- English Edit question
- Status:
- Answered
- For:
- Ubuntu bluez Edit question
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
If you reboot and run:
dmesg > ~/dmesg.txt; gedit ~/dmesg.txt; rm ~/dmesg.txt
What is output?
|
Revision history for this message
|
#2 |
The following is the output:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc
version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:12:52
UTC 2010 (Ubuntu 2.6.32-
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd8bf400 (usable)
[ 0.000000] BIOS-e820: 00000000bd8bf400 - 00000000bdac1400 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdac1400 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0xbd8bf max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 800000000 write-back
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 0BDC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] e820 update range: 00000000bdc00000 - 00000000c0000000
(usable) ==> (reserved)
[ 0.000000] e820 update range: 00000000e0000000 - 0000000100000000
(usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000
(usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bd8bf400 (usable)
[ 0.000000] modified: 00000000bd8bf400 - 00000000bdac1400 (ACPI NVS)
[ 0.000000] modified: 00000000bdac1400 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1c000 (reserved)
[ 0.000000] modified: 00000000fed20000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000feda0000 - 00000000feda6000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee10000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 37855000 - 37fefe5c
[ 0.000000] Allocated new RAMDISK: 008e2000 - 0107ce5c
[ 0.000000] Move RAMDISK from 0000000037855000 - 0000000037fefe5b to
008e2000 - 0107ce5b
[ 0.000000] ACPI: RSDP 000fbdd0 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT bdac3e00 00054 (v01 DELL WN09 27D90C07 ASL
00000061)
[ 0.000000] ACPI: FACP bdac3c9c 000F4 (v04 DELL WN09 27D90C07 ASL
00000061)
[ 0.000000] ACPI: DSDT bdac4400 05451 (v02 INT430 SYSFexxx 00001001 INTL
20050624)
[ 0.000000] ACPI: FACS bdad2c00 00040
[ 0.000000] ACPI: HPET bdac3f00 00038 (v01 DELL WN09 00000001 ASL
00000061)
[ 0.000000] ACPI: APIC bdac4000 00068 (v01 DELL WN09 27D90C07 ASL
00000047)
[ 0.000000] ACPI: MCFG bdac3fc0 0003E (v16 DELL WN09 27D90C07 ASL
00000061)
[ 0.000000] ACPI: SLIC bdac409c 00176 (v01 DELL WN09 27D90C07 ASL
00000061)
[ 0.000000] ACPI: SSDT bdac2363 0066C (v01 PmRef CpuPm 00003000 INTL
20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2144MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008ddeb8] TEXT DATA BSS ==>
[0000100000 - 00008ddeb8]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==>
[000009f000 - 0000100000]
[ 0.000000] #5 [00008de000 - 00008e1184] BRK ==>
[00008de000 - 00008e1184]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==>
[0000007000 - 0000008000]
[ 0.000000] #7 [00008e2000 - 000107ce5c] NEW RAMDISK ==>
[00008e2000 - 000107ce5c]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==>
[0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bd8bf
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bd8bf
[ 0.000000] On node 0 totalpages: 776282
[ 0.000000] free_area_
c107e000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4290 pages used for memmap
[ 0.000000] HighMem zone: 544767 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 -
0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap:
c0000000:38000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s36056 r0 d21288
u2097152
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 770216
[ 0.000000] Kernel command line:
BOOT_IMAGE=
root=UUID=
splash i915.modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 15527660 bytes of page_cgroup
[ 0.000000] please try 'cgroup_
memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:000bd8bf)
[ 0.000000] Memory: 3047844k/3105532k available (4679k kernel code,
56320k reserved, 2124k data, 660k init, 2196228k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc084a000 ( 660 kB)
[ 0.000000] .data : 0xc0591e33 - 0xc07a4e88 (2124 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0591e33 (4679 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu
timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.886 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3989.77 BogoMIPS (lpj=7979544)
[ 0.004021] Security Framework initialized
[ 0.004040] AppArmor: AppArmor initialized
[ 0.004046] Mount-cache hash table entries: 512
[ 0.004167] Initializing cgroup subsys ns
[ 0.004171] Initializing cgroup subsys cpuacct
[ 0.004176] Initializing cgroup subsys memory
[ 0.004183] Initializing cgroup subsys devices
[ 0.004185] Initializing cgroup subsys freezer
[ 0.004187] Initializing cgroup subsys net_cls
[ 0.004206] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004209] CPU: L2 cache: 2048K
[ 0.004212] CPU: Physical Processor ID: 0
[ 0.004214] CPU: Processor Core ID: 0
[ 0.004217] mce: CPU supports 6 MCE banks
[ 0.004226] CPU0: Thermal monitoring enabled (TM2)
[ 0.004229] using mwait in idle threads.
[ 0.004235] Performance Events: Core2 events, Intel PMU driver.
[ 0.004244] ... version: 2
[ 0.004246] ... bit width: 40
[ 0.004247] ... generic registers: 2
[ 0.004249] ... value mask: 000000ffffffffff
[ 0.004251] ... max period: 000000007fffffff
[ 0.004253] ... fixed-purpose events: 3
[ 0.004254] ... event mask: 0000000700000003
[ 0.004260] Checking 'hlt' instruction... OK.
[ 0.022890] ACPI: Core revision 20090903
[ 0.032009] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.032014] ftrace: allocating 21780 entries in 43 pages
[ 0.036051] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036416] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.078630] CPU0: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz
stepping 0a
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 2048K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.164094] CPU1: Intel(R) Core(TM)2 Duo CPU T6400 @ 2.00GHz
stepping 0a
[ 0.164107] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168016] Brought up 2 CPUs
[ 0.168019] Total of 2 processors activated (7980.21 BogoMIPS).
[ 0.168529] CPU0 attaching sched-domain:
[ 0.168532] domain 0: span 0-1 level MC
[ 0.168534] groups: 0 1
[ 0.168540] CPU1 attaching sched-domain:
[ 0.168542] domain 0: span 0-1 level MC
[ 0.168545] groups: 1 0
[ 0.168634] devtmpfs: initialized
[ 0.168634] regulator: core version 0.5
[ 0.168634] Time: 6:42:00 Date: 08/29/10
[ 0.168634] NET: Registered protocol family 16
[ 0.168634] Trying to unpack rootfs image as initramfs...
[ 0.168634] EISA bus registered
[ 0.168634] ACPI: bus type pci registered
[ 0.168634] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 -
63
[ 0.168634] PCI: MCFG area at f8000000 reserved in E820
[ 0.168634] PCI: Using MMCONFIG for extended config space
[ 0.168634] PCI: Using configuration type 1 for base access
[ 0.172097] bio: create slab <bio-0> at 0
[ 0.173000] ACPI: EC: Look up EC in DSDT
[ 0.173229] ACPI: BIOS _OSI(Linux) query ignored
[ 0.212283] ACPI: Interpreter enabled
[ 0.212298] ACPI: (supports S0 S3 S4 S5)
[ 0.212320] ACPI: Using IOAPIC for interrupt routing
[ 0.287816] ACPI: No dock devices found.
[ 0.311566] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.311684] pci 0000:00:02.0: reg 10 64bit mmio: [0xf6c00000-
[ 0.311692] pci 0000:00:02.0: reg 18 64bit mmio pref:
[0xe0000000-
[ 0.311697] pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
[ 0.311740] pci 0000:00:02.1: reg 10 64bit mmio: [0xf6b00000-
[ 0.311874] pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
[ 0.311975] pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
[ 0.312081] pci 0000:00:1a.2: reg 20 io port: [0x6fa0-0x6fbf]
[ 0.312184] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-
[ 0.312258] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.312264] pci 0000:00:1a.7: PME# disabled
[ 0.312325] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6afc000-
[ 0.312390] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.312395] pci 0000:00:1b.0: PME# disabled
[ 0.312495] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.312500] pci 0000:00:1c.0: PME# disabled
[ 0.312605] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.312610] pci 0000:00:1c.1: PME# disabled
[ 0.312713] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.312718] pci 0000:00:1c.2: PME# disabled
[ 0.312825] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.312830] pci 0000:00:1c.4: PME# disabled
[ 0.312914] pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
[ 0.313015] pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
[ 0.313115] pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
[ 0.313218] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-
[ 0.313291] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.313297] pci 0000:00:1d.7: PME# disabled
[ 0.313576] pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
[ 0.313585] pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
[ 0.313593] pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
[ 0.313601] pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
[ 0.313610] pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6ebf]
[ 0.313618] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfed1c800-
[ 0.313670] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.313675] pci 0000:00:1f.2: PME# disabled
[ 0.313719] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf6afbf00-
[ 0.313740] pci 0000:00:1f.3: reg 20 io port: [0x1100-0x111f]
[ 0.314239] pci 0000:0c:00.0: reg 10 64bit mmio: [0xf69fc000-
[ 0.314498] pci 0000:0c:00.0: supports D1 D2
[ 0.314501] pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
[ 0.314513] pci 0000:0c:00.0: PME# disabled
[ 0.314658] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6900000-
[ 0.314746] pci 0000:09:00.0: reg 10 64bit mmio: [0xf68fc000-
[ 0.314758] pci 0000:09:00.0: reg 18 io port: [0xde00-0xdeff]
[ 0.314850] pci 0000:09:00.0: supports D1 D2
[ 0.314852] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.314859] pci 0000:09:00.0: PME# disabled
[ 0.314943] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.314948] pci 0000:00:1c.2: bridge 32bit mmio: [0xf6800000-
[ 0.315019] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff]
[ 0.315024] pci 0000:00:1c.4: bridge 32bit mmio: [0xf6600000-
[ 0.315033] pci 0000:00:1c.4: bridge 64bit mmio pref:
[0xf0000000-
[ 0.315104] pci 0000:00:1e.0: transparent bridge
[ 0.315150] pci_bus 0000:00: on NUMA node 0
[ 0.315158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.315422] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.315561] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.315634] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.315706] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.315781] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.329850] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11)
[ 0.329971] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
[ 0.330091] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[ 0.330195] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0,
disabled.
[ 0.330315] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14
15)
[ 0.330437] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14
15)
[ 0.330558] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14
15)
[ 0.330666] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[ 0.330782] vgaarb: device added:
PCI:0000:
[ 0.330798] vgaarb: loaded
[ 0.330918] SCSI subsystem initialized
[ 0.331013] libata version 3.00 loaded.
[ 0.331083] usbcore: registered new interface driver usbfs
[ 0.331095] usbcore: registered new interface driver hub
[ 0.331122] usbcore: registered new device driver usb
[ 0.331275] ACPI: WMI: Mapper loaded
[ 0.331277] PCI: Using ACPI for IRQ routing
[ 0.331847] NetLabel: Initializing
[ 0.331849] NetLabel: domain hash size = 128
[ 0.331851] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.331863] NetLabel: unlabeled traffic allowed by default
[ 0.331896] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.331902] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.336333] Switching to clocksource tsc
[ 0.338065] AppArmor: AppArmor Filesystem Enabled
[ 0.338078] pnp: PnP ACPI init
[ 0.338092] ACPI: bus type pnp registered
[ 0.389262] pnp: PnP ACPI: found 13 devices
[ 0.389266] ACPI: ACPI bus type pnp unregistered
[ 0.389270] PnPBIOS: Disabled by ACPI PNP
[ 0.389283] system 00:01: iomem range 0xff800000-
reserved
[ 0.389286] system 00:01: iomem range 0xffc00000-
reserved
[ 0.389298] system 00:09: iomem range 0xfed00000-
reserved
[ 0.389305] system 00:0a: ioport range 0x900-0x97f has been reserved
[ 0.389308] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.389311] system 00:0a: ioport range 0x1000-0x1005 has been reserved
[ 0.389314] system 00:0a: ioport range 0x1008-0x100f has been reserved
[ 0.389320] system 00:0b: ioport range 0xf400-0xf4fe has been reserved
[ 0.389323] system 00:0b: ioport range 0x1006-0x1007 has been reserved
[ 0.389325] system 00:0b: ioport range 0x100a-0x1059 could not be
reserved
[ 0.389328] system 00:0b: ioport range 0x1060-0x107f has been reserved
[ 0.389331] system 00:0b: ioport range 0x1080-0x10bf has been reserved
[ 0.389334] system 00:0b: ioport range 0x1100-0x111f has been reserved
[ 0.389337] system 00:0b: ioport range 0x1010-0x102f has been reserved
[ 0.389339] system 00:0b: ioport range 0x809-0x809 has been reserved
[ 0.389346] system 00:0c: iomem range 0x0-0x9efff could not be reserved
[ 0.389348] system 00:0c: iomem range 0x9f000-0x9ffff could not be
reserved
[ 0.389351] system 00:0c: iomem range 0xc0000-0xcffff could not be
reserved
[ 0.389354] system 00:0c: iomem range 0xe0000-0xfffff could not be
reserved
[ 0.389357] system 00:0c: iomem range 0x100000-0xbd8bf3ff could not be
reserved
[ 0.389360] system 00:0c: iomem range 0xbd8bf400-
reserved
[ 0.389363] system 00:0c: iomem range 0xbdb00000-
reserved
[ 0.389366] system 00:0c: iomem range 0xffe00000-
reserved
[ 0.389369] system 00:0c: iomem range 0xffa00000-
reserved
[ 0.389372] system 00:0c: iomem range 0xfec00000-
reserved
[ 0.389375] system 00:0c: iomem range 0xfee00000-
reserved
[ 0.389378] system 00:0c: iomem range 0xfed20000-
reserved
[ 0.389381] system 00:0c: iomem range 0xfeda0000-
reserved
[ 0.389383] system 00:0c: iomem range 0xfeda4000-
reserved
[ 0.389386] system 00:0c: iomem range 0xfeda5000-
reserved
[ 0.389389] system 00:0c: iomem range 0xfeda6000-
reserved
[ 0.389392] system 00:0c: iomem range 0xfed1c800-
reserved
[ 0.389395] system 00:0c: iomem range 0xfed18000-
reserved
[ 0.389398] system 00:0c: iomem range 0xf8000000-
reserved
[ 0.424173] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
[ 0.424178] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.424185] pci 0000:00:1c.0: MEM window: 0xc0000000-
[ 0.424191] pci 0000:00:1c.0: PREFETCH window:
0x000000c020000
[ 0.424200] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
[ 0.424204] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.424210] pci 0000:00:1c.1: MEM window: 0xf6900000-
[ 0.424216] pci 0000:00:1c.1: PREFETCH window:
0x000000c040000
[ 0.424224] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09
[ 0.424228] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.424235] pci 0000:00:1c.2: MEM window: 0xf6800000-
[ 0.424240] pci 0000:00:1c.2: PREFETCH window:
0x000000c060000
[ 0.424249] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
[ 0.424253] pci 0000:00:1c.4: IO window: 0xc000-0xcfff
[ 0.424259] pci 0000:00:1c.4: MEM window: 0xf6600000-
[ 0.424264] pci 0000:00:1c.4: PREFETCH window:
0x000000f000000
[ 0.424273] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.424275] pci 0000:00:1e.0: IO window: disabled
[ 0.424281] pci 0000:00:1e.0: MEM window: disabled
[ 0.424286] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.424309] alloc irq_desc for 16 on node -1
[ 0.424311] alloc kstat_irqs on node -1
[ 0.424318] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.424325] pci 0000:00:1c.0: setting latency timer to 64
[ 0.424336] alloc irq_desc for 17 on node -1
[ 0.424337] alloc kstat_irqs on node -1
[ 0.424341] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.424347] pci 0000:00:1c.1: setting latency timer to 64
[ 0.424358] alloc irq_desc for 18 on node -1
[ 0.424359] alloc kstat_irqs on node -1
[ 0.424363] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.424369] pci 0000:00:1c.2: setting latency timer to 64
[ 0.424380] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.424385] pci 0000:00:1c.4: setting latency timer to 64
[ 0.424394] pci 0000:00:1e.0: setting latency timer to 64
[ 0.424399] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.424402] pci_bus 0000:00: resource 1 mem: [0x000000-
[ 0.424405] pci_bus 0000:0b: resource 0 io: [0x2000-0x2fff]
[ 0.424407] pci_bus 0000:0b: resource 1 mem: [0xc0000000-
[ 0.424410] pci_bus 0000:0b: resource 2 pref mem [0xc0200000-
[ 0.424413] pci_bus 0000:0c: resource 0 io: [0x3000-0x3fff]
[ 0.424415] pci_bus 0000:0c: resource 1 mem: [0xf6900000-
[ 0.424418] pci_bus 0000:0c: resource 2 pref mem [0xc0400000-
[ 0.424421] pci_bus 0000:09: resource 0 io: [0xd000-0xdfff]
[ 0.424423] pci_bus 0000:09: resource 1 mem: [0xf6800000-
[ 0.424426] pci_bus 0000:09: resource 2 pref mem [0xc0600000-
[ 0.424428] pci_bus 0000:0d: resource 0 io: [0xc000-0xcfff]
[ 0.424431] pci_bus 0000:0d: resource 1 mem: [0xf6600000-
[ 0.424433] pci_bus 0000:0d: resource 2 pref mem [0xf0000000-
[ 0.424436] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.424438] pci_bus 0000:03: resource 4 mem: [0x000000-
[ 0.424480] NET: Registered protocol family 2
[ 0.424581] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 0.424913] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 0.425369] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.425592] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.425595] TCP reno registered
[ 0.425673] NET: Registered protocol family 1
[ 0.425692] pci 0000:00:02.0: Boot video device
[ 0.426036] cpufreq-nforce2: No nForce2 chipset.
[ 0.426063] Scanning for low memory corruption every 60 seconds
[ 0.426177] audit: initializing netlink socket (disabled)
[ 0.426188] type=2000 audit(128306411
[ 0.436260] highmem bounce pool size: 64 pages
[ 0.436265] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.437807] VFS: Disk quotas dquot_6.5.2
[ 0.437865] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.438439] fuse init (API version 7.13)
[ 0.438525] msgmni has been set to 1665
[ 0.438732] alg: No test for stdrng (krng)
[ 0.438786] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.438789] io scheduler noop registered
[ 0.438791] io scheduler anticipatory registered
[ 0.438793] io scheduler deadline registered
[ 0.438832] io scheduler cfq registered (default)
[ 0.439002] alloc irq_desc for 24 on node -1
[ 0.439004] alloc kstat_irqs on node -1
[ 0.439016] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.439028] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.439188] alloc irq_desc for 25 on node -1
[ 0.439190] alloc kstat_irqs on node -1
[ 0.439198] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.439209] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.439371] alloc irq_desc for 26 on node -1
[ 0.439372] alloc kstat_irqs on node -1
[ 0.439381] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.439392] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.439561] alloc irq_desc for 27 on node -1
[ 0.439562] alloc kstat_irqs on node -1
[ 0.439572] pcieport 0000:00:1c.4: irq 27 for MSI/MSI-X
[ 0.439583] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.439687] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.439808] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.439931] ACPI: AC Adapter [AC] (off-line)
[ 0.440015] input: Lid Switch as
/devices/
[ 0.441041] ACPI: Lid Switch [LID]
[ 0.441086] input: Power Button as
/devices/
[ 0.441093] ACPI: Power Button [PBTN]
[ 0.441136] input: Sleep Button as
/devices/
[ 0.441139] ACPI: Sleep Button [SBTN]
[ 0.441862] ACPI: SSDT bdac29cf 0023F (v01 PmRef BspIst 00003000 INTL
20050624)
[ 0.442335] ACPI: SSDT bdac2de5 005C6 (v01 PmRef BspCst 00003001 INTL
20050624)
[ 0.442691] Monitor-Mwait will be used to enter C-1 state
[ 0.442715] Monitor-Mwait will be used to enter C-2 state
[ 0.442736] Monitor-Mwait will be used to enter C-3 state
[ 0.442742] Marking TSC unstable due to TSC halts in idle
[ 0.442797] processor LNXCPU:00: registered as cooling_device0
[ 0.443226] ACPI: SSDT bdac2c0e 001D7 (v01 PmRef ApIst 00003000 INTL
20050624)
[ 0.443560] ACPI: SSDT bdac33ab 0008D (v01 PmRef ApCst 00003000 INTL
20050624)
[ 0.443836] Switching to clocksource hpet
[ 0.447935] processor LNXCPU:01: registered as cooling_device1
[ 0.460151] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.460159] ACPI: Thermal Zone [THM] (38 C)
[ 0.461633] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.463009] brd: module loaded
[ 0.463477] loop: module loaded
[ 0.463562] input: Macintosh mouse button emulation as
/devices/
[ 0.463968] Fixed MDIO Bus: probed
[ 0.464026] PPP generic driver version 2.4.2
[ 0.464062] tun: Universal TUN/TAP device driver, 1.6
[ 0.464063] tun: (C) 1999-2004 Max Krasnyansky <email address hidden>
[ 0.464137] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.464162] alloc irq_desc for 22 on node -1
[ 0.464164] alloc kstat_irqs on node -1
[ 0.464170] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) ->
IRQ 22
[ 0.464182] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.464186] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.464220] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[ 0.464250] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.468128] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.468142] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 0.472117] isapnp: Scanning for PnP cards...
[ 0.496273] Freeing initrd memory: 7787k freed
[ 0.542166] ACPI: Battery Slot [BAT0] (battery present)
[ 0.545543] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.545677] usb usb1: configuration #1 chosen from 1 choice
[ 0.545706] hub 1-0:1.0: USB hub found
[ 0.545715] hub 1-0:1.0: 6 ports detected
[ 0.545790] alloc irq_desc for 20 on node -1
[ 0.545792] alloc kstat_irqs on node -1
[ 0.545799] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 0.545818] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.545822] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.545857] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[ 0.545889] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.549791] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.549808] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 0.597262] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.597335] usb usb2: configuration #1 chosen from 1 choice
[ 0.597360] hub 2-0:1.0: USB hub found
[ 0.597367] hub 2-0:1.0: 6 ports detected
[ 0.597431] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.597449] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.597489] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 0.597497] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.597501] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.597531] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[ 0.597559] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
[ 0.597646] usb usb3: configuration #1 chosen from 1 choice
[ 0.597673] hub 3-0:1.0: USB hub found
[ 0.597679] hub 3-0:1.0: 2 ports detected
[ 0.597726] alloc irq_desc for 21 on node -1
[ 0.597728] alloc kstat_irqs on node -1
[ 0.597732] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 0.597739] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.597742] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.597772] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[ 0.597806] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
[ 0.597899] usb usb4: configuration #1 chosen from 1 choice
[ 0.597924] hub 4-0:1.0: USB hub found
[ 0.597931] hub 4-0:1.0: 2 ports detected
[ 0.597977] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) ->
IRQ 22
[ 0.597983] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.597987] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.598017] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
number 5
[ 0.598043] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
[ 0.598133] usb usb5: configuration #1 chosen from 1 choice
[ 0.598158] hub 5-0:1.0: USB hub found
[ 0.598164] hub 5-0:1.0: 2 ports detected
[ 0.598212] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 0.598219] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.598223] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.598253] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 6
[ 0.598280] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
[ 0.598369] usb usb6: configuration #1 chosen from 1 choice
[ 0.598394] hub 6-0:1.0: USB hub found
[ 0.598400] hub 6-0:1.0: 2 ports detected
[ 0.598446] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) ->
IRQ 21
[ 0.598452] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.598456] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.598491] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 7
[ 0.598517] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
[ 0.598613] usb usb7: configuration #1 chosen from 1 choice
[ 0.598637] hub 7-0:1.0: USB hub found
[ 0.598644] hub 7-0:1.0: 2 ports detected
[ 0.598688] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) ->
IRQ 22
[ 0.598695] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.598698] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.598729] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 8
[ 0.598755] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 0.598843] usb usb8: configuration #1 chosen from 1 choice
[ 0.598868] hub 8-0:1.0: USB hub found
[ 0.598875] hub 8-0:1.0: 2 ports detected
[ 0.598973] PNP: PS/2 Controller [PNP0303:
irq 1,12
[ 0.616761] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.629431] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.629437] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.629463] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.629484] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.629508] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.629618] mice: PS/2 mouse device common for all mice
[ 0.630376] rtc_cmos 00:04: RTC can wake from S4
[ 0.630414] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.630445] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.630546] device-mapper: uevent: version 1.0.3
[ 0.634327] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
<email address hidden>
[ 0.634394] device-mapper: multipath: version 1.1.0 loaded
[ 0.634397] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.634504] EISA: Probing bus 0 at eisa.0
[ 0.634510] Cannot allocate resource for EISA slot 1
[ 0.634512] Cannot allocate resource for EISA slot 2
[ 0.634514] Cannot allocate resource for EISA slot 3
[ 0.634537] EISA: Detected 0 cards.
[ 0.634669] cpuidle: using governor ladder
[ 0.634783] cpuidle: using governor menu
[ 0.635232] TCP cubic registered
[ 0.635382] NET: Registered protocol family 10
[ 0.635835] lo: Disabled Privacy Extensions
[ 0.636173] NET: Registered protocol family 17
[ 0.636898] Using IPI No-Shortcut mode
[ 0.636964] PM: Resume from disk failed.
[ 0.636977] registered taskstats version 1
[ 0.637756] Magic number: 6:510:722
[ 0.637766] block loop2: hash matches
[ 0.637845] rtc_cmos 00:04: setting system clock to 2010-08-29 06:42:00
UTC (1283064120)
[ 0.637848] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.637849] EDD information not available.
[ 0.656460] input: AT Translated Set 2 keyboard as
/devices/
[ 0.894838] isapnp: No Plug & Play device found
[ 0.894850] Freeing unused kernel memory: 660k freed
[ 0.895243] Write protecting the kernel text: 4680k
[ 0.895295] Write protecting the kernel read-only data: 1844k
[ 0.923231] udev: starting version 151
[ 1.018321] sky2 driver version 1.25
[ 1.018369] sky2 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.018385] sky2 0000:09:00.0: setting latency timer to 64
[ 1.018414] sky2 0000:09:00.0: Yukon-2 FE+ chip revision 0
[ 1.018520] alloc irq_desc for 28 on node -1
[ 1.018522] alloc kstat_irqs on node -1
[ 1.018540] sky2 0000:09:00.0: irq 28 for MSI/MSI-X
[ 1.019251] sky2 eth0: addr 00:23:ae:35:b9:d9
[ 1.020058] usb 1-5: new high speed USB device using ehci_hcd and address
3
[ 1.067485] ahci 0000:00:1f.2: version 3.0
[ 1.067506] ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.067550] alloc irq_desc for 29 on node -1
[ 1.067552] alloc kstat_irqs on node -1
[ 1.067564] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 1.067619] ahci: SSS flag set, parallel bus scan disabled
[ 1.067657] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps
0x33 impl SATA mode
[ 1.067661] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio
slum part ccc ems
[ 1.067667] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.088175] scsi0 : ahci
[ 1.088349] scsi1 : ahci
[ 1.088440] scsi2 : ahci
[ 1.088530] scsi3 : ahci
[ 1.088619] scsi4 : ahci
[ 1.088701] scsi5 : ahci
[ 1.089135] ata1: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c900
irq 29
[ 1.089139] ata2: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1c980
irq 29
[ 1.089141] ata3: DUMMY
[ 1.089142] ata4: DUMMY
[ 1.089145] ata5: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb00
irq 29
[ 1.089149] ata6: SATA max UDMA/133 abar m2048@0xfed1c800 port 0xfed1cb80
irq 29
[ 1.163250] usb 1-5: configuration #1 chosen from 1 choice
[ 1.173917] Initializing USB Mass Storage driver...
[ 1.174039] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.174122] usbcore: registered new interface driver usb-storage
[ 1.174125] USB Mass Storage support registered.
[ 1.174130] usb-storage: device found at 3
[ 1.174131] usb-storage: waiting for device to settle before scanning
[ 1.276095] usb 1-6: new high speed USB device using ehci_hcd and address
4
[ 1.408056] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.451768] ata1.00: ATA-8: TOSHIBA MK2555GSX, FG000D, max UDMA/100
[ 1.451774] ata1.00: 488397168 sectors, multi 8: LBA48 NCQ (depth 31/32),
AA
[ 1.452707] ata1.00: configured for UDMA/100
[ 1.468221] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2555GS
FG00 PQ: 0 ANSI: 5
[ 1.468379] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.468483] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
GB/232 GiB)
[ 1.468527] sd 0:0:0:0: [sda] Write Protect is off
[ 1.468530] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.468554] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 1.468683] sda:
[ 1.483724] usb 1-6: configuration #1 chosen from 1 choice
[ 1.516039] sda1 sda2 < sda5 >
[ 1.544123] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.724073] usb 3-1: new full speed USB device using uhci_hcd and address
2
[ 1.896743] usb 3-1: configuration #1 chosen from 1 choice
[ 1.898685] hub 3-1:1.0: USB hub found
[ 1.900630] hub 3-1:1.0: 3 ports detected
[ 2.181636] usb 3-1.1: new full speed USB device using uhci_hcd and
address 3
[ 2.192054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.205036] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633B, D400, max
UDMA/100
[ 2.205061] ata2.00: applying bridge limits
[ 2.218152] ata2.00: configured for UDMA/100
[ 2.238155] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633B
D400 PQ: 0 ANSI: 5
[ 2.244108] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2
cdda tray
[ 2.244112] Uniform CD-ROM driver Revision: 3.20
[ 2.244252] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.244312] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.300733] usb 3-1.1: configuration #1 chosen from 1 choice
[ 2.377636] usb 3-1.2: new full speed USB device using uhci_hcd and
address 4
[ 2.499738] usb 3-1.2: configuration #1 chosen from 1 choice
[ 2.507022] usbcore: registered new interface driver hiddev
[ 2.509910] input: HID 413c:8161 as
/devices/
[ 2.509981] generic-usb 0003:413C:
Keyboard [HID 413c:8161] on usb-0000:
[ 2.513958] input: HID 413c:8162 as
/devices/
[ 2.514036] generic-usb 0003:413C:
Mouse [HID 413c:8162] on usb-0000:
[ 2.514054] usbcore: registered new interface driver usbhid
[ 2.514057] usbhid: v2.6:USB HID core driver
[ 2.564034] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.900031] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.275149] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.172458] usb-storage: device scan complete
[ 6.174558] scsi 6:0:0:0: Direct-Access Generic- Multi-Card
1.00 PQ: 0 ANSI: 0 CCS
[ 6.175154] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.179260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 18.156202] udev: starting version 151
[ 18.247035] lp: driver loaded but no devices found
[ 18.273115] Adding 8954872k swap on /dev/sda5. Priority:-1 extents:1
across:8954872k
[ 18.413944] lib80211: common routines for IEEE802.11 drivers
[ 18.413948] lib80211_crypt: registered algorithm 'NULL'
[ 18.453238] Linux agpgart interface v0.103
[ 18.496284] wl: module license 'MIXED/Proprietary' taints kernel.
[ 18.496287] Disabling lock debugging due to kernel taint
[ 18.515530] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[ 18.521963] wl 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.521976] wl 0000:0c:00.0: setting latency timer to 64
[ 18.570135] [drm] Initialized drm 1.1.0 20060810
[ 18.583288] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express
Chipset
[ 18.584613] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 18.590998] Linux video capture interface: v2.00
[ 18.599835] type=1505 audit(128306413
pid=762 name="/
[ 18.600515] type=1505 audit(128306413
pid=762 name="/
[ 18.600879] type=1505 audit(128306413
pid=762 name="/
[ 18.601834] uvcvideo: Found UVC 1.00 device Integrated_
(0c45:63ee)
[ 18.611909] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.612609] input: Integrated_
/devices/
[ 18.612668] usbcore: registered new interface driver uvcvideo
[ 18.612671] USB Video Class driver (v0.1.0)
[ 18.624957] input: Dell WMI hotkeys as /devices/
[ 18.651974] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 18.659499] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 18.660369] lib80211_crypt: registered algorithm 'TKIP'
[ 18.660745] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller
5.60.48.36
[ 18.663300] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 18.663304] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack
module option or
[ 18.663305] sysctl net.netfilter.
[ 18.727980] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.729445] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.729450] i915 0000:00:02.0: setting latency timer to 64
[ 18.734429] mtrr: type mismatch for e0000000,10000000 old: write-back
new: write-combining
[ 18.734433] [drm] MTRR allocation failed. Graphics performance may
suffer.
[ 18.735669] alloc irq_desc for 30 on node -1
[ 18.735672] alloc kstat_irqs on node -1
[ 18.735681] i915 0000:00:02.0: irq 30 for MSI/MSI-X
[ 18.735688] [drm] set up 31M of stolen space
[ 19.071816] input: PS/2 Mouse as
/devices/
[ 19.203672] type=1505 audit(128306413
pid=1030 name="/
[ 19.205542] type=1505 audit(128306413
operation=
[ 19.206237] type=1505 audit(128306413
operation=
name="/
[ 19.206607] type=1505 audit(128306413
operation=
name="/
[ 19.210215] type=1505 audit(128306413
pid=1032 name="/
[ 19.218994] type=1505 audit(128306413
pid=1032 name="/
[ 19.225200] type=1505 audit(128306413
pid=1032 name="/
[ 19.420792] sky2 eth0: enabling interface
[ 19.420983] ADDRCONF(
[ 19.438257] fb0: inteldrmfb frame buffer device
[ 19.438260] registered panic notifier
[ 19.458085] input: AlpsPS/2 ALPS GlidePoint as
/devices/
[ 19.461308] acpi device:3b: registered as cooling_device2
[ 19.462894] input: Video Bus as
/devices/
[ 19.463027] ACPI: Video Device [VID1] (multi-head: yes rom: no post:
no)
[ 19.463091] ACPI Warning for \_SB_.PCI0.
elements (empty) (20090903/
[ 19.463493] input: Video Bus as
/devices/
[ 19.467177] ACPI: Video Device [VID2] (multi-head: yes rom: no post:
no)
[ 19.467273] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
minor 0
[ 19.467316] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) ->
IRQ 21
[ 19.467342] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 19.471640] vga16fb: initializing
[ 19.471644] vga16fb: mapped to 0xc00a0000
[ 19.471647] vga16fb: not registering due to another framebuffer present
[ 19.543427] input: HDA Digital PCBeep as
/devices/
[ 19.561362] input: HDA Intel Mic at Ext Right Jack as
/devices/
[ 19.561534] input: HDA Intel HP Out at Ext Right Jack as
/devices/
[ 19.741900] Console: switching to colour frame buffer device 170x48
[ 19.875372] ppdev: user-space parallel port driver
[ 30.256008] eth1: no IPv6 routers present
[ 190.167203] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control
both
[ 190.167669] ADDRCONF(
[ 190.177978] sky2 eth0: Link is down.
[ 191.825313] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control
both
[ 201.144076] eth0: no IPv6 routers present
[ 205.242781] sky2 eth0: Link is down.
[ 206.863381] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control
both
[ 274.852069] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54882 WINDOW=0 RES=0x00 RST URGP=0
[ 274.932768] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54882 WINDOW=0 RES=0x00 RST URGP=0
[ 274.936598] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54882 WINDOW=0 RES=0x00 RST URGP=0
[ 275.153229] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54883 WINDOW=0 RES=0x00 RST URGP=0
[ 275.153682] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54883 WINDOW=0 RES=0x00 RST URGP=0
[ 275.158846] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54883 WINDOW=0 RES=0x00 RST URGP=0
[ 275.389814] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54884 WINDOW=0 RES=0x00 RST URGP=0
[ 275.390298] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54884 WINDOW=0 RES=0x00 RST URGP=0
[ 275.392800] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54884 WINDOW=0 RES=0x00 RST URGP=0
[ 278.508965] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=54885 WINDOW=0 RES=0x00 RST URGP=0
[ 320.129734] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=52123 WINDOW=0 RES=0x00 RST URGP=0
[ 320.142523] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=52123 WINDOW=0 RES=0x00 RST URGP=0
[ 335.082591] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=52129 WINDOW=0 RES=0x00 RST URGP=0
[ 355.454369] [UFW BLOCK] IN=eth0 OUT=
MAC=00:
DST=192.168.1.2 LEN=40 TOS=0x00 PREC=0x00 TTL=53 ID=0 DF PROTO=TCP SPT=80
DPT=52134 WINDOW=0 RES=0x00 RST URGP=0
[ 586.560249] CE: hpet increasing min_delta_ns to 15000 nsec
[ 592.333219] sky2 eth0: Link is down.
[ 1122.866215] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control
both
[ 1138.734821] sky2 eth0: Link is down.
[ 1140.419229] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control
both
|
Revision history for this message
|
#3 |
[ 30.256008] eth1: no IPv6 routers present
[ 190.167203] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control
both
Looks like your wireless is taking 160 seconds to come up. You may want to run:
sudo lshw -C network
Read the product line and find guides / bugs or log a bug. Make sure you have the latest bios too.
|
Revision history for this message
|
#4 |
Am having the Latest BIOS version.
The following is the output for lshw -C netwok.
*-network
description: Wireless interface
product: BCM4312 802.11b/g
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:0c:00.0
logical name: eth1
version: 01
serial: 00:24:2c:a0:e4:a1
width: 64 bits
clock: 33MHz
wireless
latency=0 multicast=yes wireless=IEEE 802.11bg
resources: irq:17 memory:
*-network
description: Ethernet interface
product: 88E8040 PCI-E Fast Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
bus info: pci@0000:09:00.0
logical name: eth0
version: 13
serial: 00:23:ae:35:b9:d9
size: 100MB/s
capacity: 100MB/s
width: 64 bits
clock: 33MHz
tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation
driverversion=1.25 duplex=full firmware=N/A ip=192.168.1.2 latency=0
link=yes multicast=yes port=twisted pair speed=100MB/s
resources: irq:29 memory:
|
Revision history for this message
|
#5 |
Ok, see if there are any bugs for the Marvell 88E8040 taking ages to wake up. That is what is causing the slowness. You can test by disabling the device in BIOS. I bet it boots super fast.
Can you help with this problem?
Provide an answer of your own, or ask deepanzone for more information if necessary.
