Ubuntu

How to enable built-in camera, wireless and blue tooth of ASUS F3Jc laptop?

Asked by chunchengch

Ubuntu 7.04 is working fine on my ASUS F3Jc laptop except the built-in camera, wireless and blue tooth , I am just a linux newbie, I really don't know how to make those working? should there be any solution?

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Jan Kaláb (pitel) said : 		#1

Paste here output of lspci and lsusb commands. so we can see what devices are in your laptop.

Revision history for this message
chunchengch (chunchengch) said : 		#2

chunchengch@paul:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 110M / GeForce Go 7300 (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
06:01.0 FireWire (IEEE 1394): Ricoh Co Ltd Unknown device 0832
06:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
06:01.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
06:01.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
chunchengch@paul:~$ lsusb
Bus 005 Device 003: ID 05e1:0501 Syntek Semiconductor Co., Ltd
Bus 005 Device 001: ID 0000:0000
Bus 002 Device 003: ID 046d:c019 Logitech, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
chunchengch@paul:~$

Revision history for this message
Jan Kaláb (pitel) said : 		#3

Card reader (Ricoh R5C822)
Add on new line "tifm_sd" (without quotes) to /etc/modules (you will need to sudo), and reboot. It should start to work.

Wireless
Look if you have installed package linux-restricted-modules-generic.

Webcam
Please paste lsusb -v to see more details (the exact type of Logitech webcam).

Revision history for this message
huan (huan-autistici) said : 		#4

For your webcam see at:

http://syntekdriver.sourceforge.net/

Revision history for this message
huan (huan-autistici) said : 		#5

See also:

http://gquintana.free.fr/laptop/asus_f3jc/kubuntu-6.10.html

Revision history for this message
chunchengch (chunchengch) said : 		#6

To huan, thank you but I don't know how to install the driver?

To Jan Kaláb, thank you and please refer to further information appended, I also need driver installation guide step by step.

1. I just add "tifm_sd" to /etc/modules, and will reboot later to see if Card reader (Ricoh R5C822) starts to work.

2. for Wireless problem, the package linux-restricted-modules-generic was already installed

3. details for built-in Webcam and USB devices :

 bmAttributes 0x80
      (Bus Powered)
    MaxPower 500mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0000 1x 0 bytes
        bInterval 5
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0000 1x 0 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 1
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 5
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0300 1x 768 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 2
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 5
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x03fc 1x 1020 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 3
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 5
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0400 1x 0 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 4
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 5
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0c00 2x 0 bytes
        bInterval 1
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 5
      bNumEndpoints 2
      bInterfaceClass 255 Vendor Specific Class
      bInterfaceSubClass 255 Vendor Specific Subclass
      bInterfaceProtocol 255 Vendor Specific Protocol
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 5
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x82 EP 2 IN
        bmAttributes 1
          Transfer Type Isochronous
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x1400 3x 0 bytes
        bInterval 1
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 005 Device 001: ID 0000:0000
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 1 Single TT
  bMaxPacketSize0 64
  idVendor 0x0000
  idProduct 0x0000
  bcdDevice 2.06
  iManufacturer 3
  iProduct 2
  iSerial 1
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0004 1x 4 bytes
        bInterval 12
can't get hub descriptor: Operation not permitted
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 003 Device 001: ID 0000:0000
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed hub
  bMaxPacketSize0 64
  idVendor 0x0000
  idProduct 0x0000
  bcdDevice 2.06
  iManufacturer 3
  iProduct 2
  iSerial 1
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 002 Device 003: ID 046d:c019 Logitech, Inc.
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 2.00
  bDeviceClass 0 (Defined at Interface level)
  bDeviceSubClass 0
  bDeviceProtocol 0
  bMaxPacketSize0 8
  idVendor 0x046d Logitech, Inc.
  idProduct 0xc019
  bcdDevice 43.00
  iManufacturer 1
  iProduct 2
  iSerial 0
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 34
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower 100mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 3 Human Interface Devices
      bInterfaceSubClass 1 Boot Interface Subclass
      bInterfaceProtocol 2 Mouse
      iInterface 0
        HID Device Descriptor:
          bLength 9
          bDescriptorType 33
          bcdHID 1.11
          bCountryCode 0 Not supported
          bNumDescriptors 1
          bDescriptorType 34 Report
          wDescriptorLength 55
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0005 1x 5 bytes
        bInterval 10
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 002 Device 001: ID 0000:0000
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed hub
  bMaxPacketSize0 64
  idVendor 0x0000
  idProduct 0x0000
  bcdDevice 2.06
  iManufacturer 3
  iProduct 2
  iSerial 1
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 004 Device 001: ID 0000:0000
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed hub
  bMaxPacketSize0 64
  idVendor 0x0000
  idProduct 0x0000
  bcdDevice 2.06
  iManufacturer 3
  iProduct 2
  iSerial 1
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)

Bus 001 Device 001: ID 0000:0000
Device Descriptor:
  bLength 18
  bDescriptorType 1
  bcdUSB 1.10
  bDeviceClass 9 Hub
  bDeviceSubClass 0 Unused
  bDeviceProtocol 0 Full speed hub
  bMaxPacketSize0 64
  idVendor 0x0000
  idProduct 0x0000
  bcdDevice 2.06
  iManufacturer 3
  iProduct 2
  iSerial 1
  bNumConfigurations 1
  Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 25
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 0
    bmAttributes 0xe0
      Self Powered
      Remote Wakeup
    MaxPower 0mA
    Interface Descriptor:
      bLength 9
      bDescriptorType 4
      bInterfaceNumber 0
      bAlternateSetting 0
      bNumEndpoints 1
      bInterfaceClass 9 Hub
      bInterfaceSubClass 0 Unused
      bInterfaceProtocol 0 Full speed hub
      iInterface 0
      Endpoint Descriptor:
        bLength 7
        bDescriptorType 5
        bEndpointAddress 0x81 EP 1 IN
        bmAttributes 3
          Transfer Type Interrupt
          Synch Type None
          Usage Type Data
        wMaxPacketSize 0x0002 1x 2 bytes
        bInterval 255
can't get hub descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)
chunchengch@paul:/etc$

Revision history for this message
chunchengch (chunchengch) said : 		#7

one more question, the volume icon on the system tray does not work, I can not adjust the volume by clicking this icon and moving the bar.

Revision history for this message
Jan Kaláb (pitel) said : 		#8

Volume change: Open the volume settings window, and try which slider will work. After you figure it out, go to System>Preferences (I don't know how it's in English, but it's the part of settings which doesn't need root privileges)->Sound and there, at the bottom, hold Ctrl key and select the other channel. So you should have selected PCM and something else.

Oh, now I noticed it changes the behavior of laptop volume keys... so use the laptop keys, not the slider ;)

P.S. It's not system tray, the volume control is so called applet for gnome panel. System tray is just another applet too.

Revision history for this message
chunchengch (chunchengch) said : 		#9

I am sorry to say the volume applet still does work, and I notice an odd thing no matter how I change the setting, when I move cursor onto the volume applet, the cue always shows "CD: **%".

by the way, Card reader (Ricoh R5C822) still does not work.

Revision history for this message
chunchengch (chunchengch) said : 		#10

correction:

I am sorry to say the volume applet still does not work, and.....

Revision history for this message
huan (huan-autistici) said : 		#11

Al you need are in the forum on sourceforge.net

Revision history for this message
Sumit Kumar (sumitkum7) said : 		#12

I have a MSI WInd notebook which came with Xp pre installed on it. I removed XP and put on Ubuntu 9.10. Ubuntu is awesome and super super. Except for the in-built webcam .....that doesnt work. I need to do something to recognize the webcam, what should i do?

I am pasting my info

sumit@sumit-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)
sumit@sumit-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f3:0230 Elan Microelectronics Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1c4f:0002 SiGma Micro
sumit@sumit-laptop:~$ ^C
sumit@sumit-laptop:~$

Revision history for this message
Sumit Kumar (sumitkum7) said : 		#13

I have a MSI WInd notebook which came with Xp pre installed on it. I removed XP and put on Ubuntu 9.10. Ubuntu is awesome and super super. Except for the in-built webcam .....that doesnt work. I need to do something to recognize the webcam, what should i do?

I am pasting my info

sumit@sumit-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)
sumit@sumit-laptop:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 04f3:0230 Elan Microelectronics Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 1c4f:0002 SiGma Micro
sumit@sumit-laptop:~$ ^C
sumit@sumit-laptop:~$

Can you help with this problem?

Provide an answer of your own, or ask chunchengch for more information if necessary.

To post a message you must log in.