lynksis AE3000 usb addature not working

Asked by Shaun Phillips

no wireless internet. Still rather new to ubuntu, need help

Question information

Language:
English Edit question
Status:
Answered
For:
Ubuntu Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
actionparsnip (andrew-woodhead666) said :
#1

What is the output of:

sudo lshw -C network; lsb_release -a; uname -a; lsusb

Thanks

Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#2

Hi,

Please first connect your wired network adapter to the wireless router using an ethernet cable (also known as a LAN cable).

In order to gather essential troubleshooting information about your wireless card, please follow this procedure:

Step 1:

If you are using the Gnome interface, open the Terminal console via "Applications->Accessories->Terminal"

If you are using the Unity interface, the easiest way to open the Terminal is to use the 'search' function on the dash. Or you can click on the 'More Apps' button, click on the 'See more results' by the installed section, and find it in that list of applications. A third way, available after you click on the 'More Apps' button, is to go to the search bar, and see that the far right end of it says 'All Applications'. You then click on that, and you'll see the full list. Then you can go to Accessories > Terminal after that.

The methods in Unity are:
Press Control-ALT-T key combination.
Dash > Search for Terminal
Dash > More Apps > 'See More Results' > Terminal
Dash > More Apps > Accessories > Terminal

Step 2: Please copy-paste the following command from https://help.ubuntu.com/community/WirelessTroubleshootingProcedure in Firefox into the Linux Terminal. Do NOT copy-paste from the Email message into the Terminal, as that will only copy PART of the command. The command STARTS with the word sudo and ENDS with the word lsmod. So please copy-paste the ENTIRE command below from Firefox into a Terminal, press <enter>, then enter password when sudo asks for password, then press enter again.

Tip: If you have a wheel mouse or 3 button mouse you do not need to type commands into the Terminal. Highlight the command written on the page. Move your cursor anywhere in the Terminal and press the wheel or middle button. Automatic Copy and paste! No spelling mistakes! No Typos! No other errors!

sudo apt-get update; sudo apt-get install hwinfo grep rfkill; sudo lshw -C network; rfkill list; sudo iwlist scan | egrep -i 'chan|ssid'; cat /etc/network/interfaces; cat /etc/lsb-release; lspci -nn; lsusb; sudo lshw -short; uname -a; dmesg | egrep '02:00|80211|acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|ireless|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|ound|p54|prism|rror|rtl|rt2|rt3|rt5|rt6|rt7|usb|witch|wl';sudo dmidecode|egrep 'anufact|roduct|erial|elease'; iwconfig; cat /etc/modprobe.d/* | egrep '80211|acx|at76|ath|b43|bcm|brcm|CX|eth|ipw|irmware|isl|lbtf|orinoco|ndiswrapper|NPE|p54|prism|rtl|rt2|rt3|rt6|rt7|wmi|witch|wl'; cat /var/lib/NetworkManager/NetworkManager.state; sudo hwinfo --netcard ; ps -aux|egrep 'wpa|icd|etwork'; netstat -rn ; cat /etc/resolv.conf; sudo lsmod

Step 3: Please post results (copy/paste terminal output) on this thread. The troubleshooters here need to see the full Terminal output from running the above command.

Regards,

Mark

Revision history for this message
Shaun Phillips (bldrofshadows) said :
#3

Hit http://us.archive.ubuntu.com precise Release.gpg
Get:1 http://us.archive.ubuntu.com precise-updates Release.gpg [198 B]
Hit http://us.archive.ubuntu.com precise-backports Release.gpg
Get:2 http://security.ubuntu.com precise-security Release.gpg [198 B]
Hit http://extras.ubuntu.com precise Release.gpg
Hit http://us.archive.ubuntu.com precise Release
Get:3 http://us.archive.ubuntu.com precise-updates Release [49.6 kB]
Get:4 http://security.ubuntu.com precise-security Release [49.6 kB]
Hit http://extras.ubuntu.com precise Release
Hit http://us.archive.ubuntu.com precise-backports Release
Hit http://extras.ubuntu.com precise/main Sources
Hit http://us.archive.ubuntu.com precise/main Sources
Hit http://us.archive.ubuntu.com precise/restricted Sources
Hit http://us.archive.ubuntu.com precise/universe Sources
Hit http://us.archive.ubuntu.com precise/multiverse Sources
Hit http://us.archive.ubuntu.com precise/main amd64 Packages
Hit http://us.archive.ubuntu.com precise/restricted amd64 Packages
Hit http://us.archive.ubuntu.com precise/universe amd64 Packages
Hit http://us.archive.ubuntu.com precise/multiverse amd64 Packages
Hit http://us.archive.ubuntu.com precise/main i386 Packages
Hit http://us.archive.ubuntu.com precise/restricted i386 Packages
Hit http://extras.ubuntu.com precise/main amd64 Packages
Hit http://extras.ubuntu.com precise/main i386 Packages
Hit http://us.archive.ubuntu.com precise/universe i386 Packages
Hit http://us.archive.ubuntu.com precise/multiverse i386 Packages
Hit http://us.archive.ubuntu.com precise/main TranslationIndex
Hit http://us.archive.ubuntu.com precise/multiverse TranslationIndex
Hit http://us.archive.ubuntu.com precise/restricted TranslationIndex
Hit http://us.archive.ubuntu.com precise/universe TranslationIndex
Get:5 http://us.archive.ubuntu.com precise-updates/main Sources [380 kB]
Ign http://extras.ubuntu.com precise/main TranslationIndex
Get:6 http://security.ubuntu.com precise-security/main Sources [70.7 kB]
Get:7 http://security.ubuntu.com precise-security/restricted Sources [2,494 B]
Get:8 http://security.ubuntu.com precise-security/universe Sources [24.0 kB]
Get:9 http://security.ubuntu.com precise-security/multiverse Sources [1,389 B]
Get:10 http://security.ubuntu.com precise-security/main amd64 Packages [252 kB]
Get:11 http://us.archive.ubuntu.com precise-updates/restricted Sources [5,467 B]
Get:12 http://us.archive.ubuntu.com precise-updates/universe Sources [85.8 kB]
Get:13 http://us.archive.ubuntu.com precise-updates/multiverse Sources [6,562 B]
Get:14 http://us.archive.ubuntu.com precise-updates/main amd64 Packages [605 kB]
Get:15 http://security.ubuntu.com precise-security/restricted amd64 Packages [4,627 B]
Get:16 http://security.ubuntu.com precise-security/universe amd64 Packages [71.7 kB]
Ign http://extras.ubuntu.com precise/main Translation-en_US
Get:17 http://security.ubuntu.com precise-security/multiverse amd64 Packages [2,182 B]
Get:18 http://security.ubuntu.com precise-security/main i386 Packages [265 kB]
Ign http://extras.ubuntu.com precise/main Translation-en
Get:19 http://us.archive.ubuntu.com precise-updates/restricted amd64 Packages [10.1 kB]
Get:20 http://us.archive.ubuntu.com precise-updates/universe amd64 Packages [196 kB]
Get:21 http://us.archive.ubuntu.com precise-updates/multiverse amd64 Packages [13.6 kB]
Get:22 http://us.archive.ubuntu.com precise-updates/main i386 Packages [618 kB]
Get:23 http://security.ubuntu.com precise-security/restricted i386 Packages [4,620 B]
Get:24 http://security.ubuntu.com precise-security/universe i386 Packages [74.1 kB]
Get:25 http://us.archive.ubuntu.com precise-updates/restricted i386 Packages [10.0 kB]
Get:26 http://us.archive.ubuntu.com precise-updates/universe i386 Packages [200 kB]
Get:27 http://us.archive.ubuntu.com precise-updates/multiverse i386 Packages [13.8 kB]
Hit http://us.archive.ubuntu.com precise-updates/main TranslationIndex
Hit http://us.archive.ubuntu.com precise-updates/multiverse TranslationIndex
Hit http://us.archive.ubuntu.com precise-updates/restricted TranslationIndex
Hit http://us.archive.ubuntu.com precise-updates/universe TranslationIndex
Hit http://us.archive.ubuntu.com precise-backports/main Sources
Hit http://us.archive.ubuntu.com precise-backports/restricted Sources
Hit http://us.archive.ubuntu.com precise-backports/universe Sources
Hit http://us.archive.ubuntu.com precise-backports/multiverse Sources
Hit http://us.archive.ubuntu.com precise-backports/main amd64 Packages
Hit http://us.archive.ubuntu.com precise-backports/restricted amd64 Packages
Hit http://us.archive.ubuntu.com precise-backports/universe amd64 Packages
Hit http://us.archive.ubuntu.com precise-backports/multiverse amd64 Packages
Hit http://us.archive.ubuntu.com precise-backports/main i386 Packages
Hit http://us.archive.ubuntu.com precise-backports/restricted i386 Packages
Hit http://us.archive.ubuntu.com precise-backports/universe i386 Packages
Hit http://us.archive.ubuntu.com precise-backports/multiverse i386 Packages
Hit http://us.archive.ubuntu.com precise-backports/main TranslationIndex
Hit http://us.archive.ubuntu.com precise-backports/multiverse TranslationIndex
Hit http://us.archive.ubuntu.com precise-backports/restricted TranslationIndex
Hit http://us.archive.ubuntu.com precise-backports/universe TranslationIndex
Hit http://us.archive.ubuntu.com precise/main Translation-en
Hit http://us.archive.ubuntu.com precise/multiverse Translation-en
Hit http://us.archive.ubuntu.com precise/restricted Translation-en
Hit http://us.archive.ubuntu.com precise/universe Translation-en
Hit http://us.archive.ubuntu.com precise-updates/main Translation-en
Hit http://us.archive.ubuntu.com precise-updates/multiverse Translation-en
Hit http://us.archive.ubuntu.com precise-updates/restricted Translation-en
Hit http://us.archive.ubuntu.com precise-updates/universe Translation-en
Hit http://us.archive.ubuntu.com precise-backports/main Translation-en
Hit http://us.archive.ubuntu.com precise-backports/multiverse Translation-en
Hit http://us.archive.ubuntu.com precise-backports/restricted Translation-en
Hit http://us.archive.ubuntu.com precise-backports/universe Translation-en
Get:28 http://security.ubuntu.com precise-security/multiverse i386 Packages [2,368 B]
Hit http://security.ubuntu.com precise-security/main TranslationIndex
Hit http://security.ubuntu.com precise-security/multiverse TranslationIndex
Hit http://security.ubuntu.com precise-security/restricted TranslationIndex
Hit http://security.ubuntu.com precise-security/universe TranslationIndex
Hit http://security.ubuntu.com precise-security/main Translation-en
Hit http://security.ubuntu.com precise-security/multiverse Translation-en
Hit http://security.ubuntu.com precise-security/restricted Translation-en
Hit http://security.ubuntu.com precise-security/universe Translation-en
Fetched 3,020 kB in 12s (248 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
grep is already the newest version.
rfkill is already the newest version.
The following NEW packages will be installed:
  hwinfo libhal1 libhd16
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 769 kB of archives.
After this operation, 2,246 kB of additional disk space will be used.
Get:1 http://us.archive.ubuntu.com/ubuntu/ precise/universe libhal1 amd64 0.5.14-8 [78.4 kB]
Get:2 http://us.archive.ubuntu.com/ubuntu/ precise/universe libhd16 amd64 16.0-2.1 [672 kB]
Get:3 http://us.archive.ubuntu.com/ubuntu/ precise/universe hwinfo amd64 16.0-2.1 [18.5 kB]
Fetched 769 kB in 1s (511 kB/s)
Selecting previously unselected package libhal1.
(Reading database ... 281882 files and directories currently installed.)
Unpacking libhal1 (from .../libhal1_0.5.14-8_amd64.deb) ...
Selecting previously unselected package libhd16.
Unpacking libhd16 (from .../libhd16_16.0-2.1_amd64.deb) ...
Selecting previously unselected package hwinfo.
Unpacking hwinfo (from .../hwinfo_16.0-2.1_amd64.deb) ...
Processing triggers for man-db ...
Setting up libhal1 (0.5.14-8) ...
Setting up libhd16 (16.0-2.1) ...
Setting up hwinfo (16.0-2.1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@1:6
       logical name: wlan0
       serial: 00:25:9c:e2:79:39
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rt2800usb driverversion=3.2.0-41-generic firmware=0.29 ip=192.168.1.117 link=yes multicast=yes wireless=IEEE 802.11abgn
0: phy0: Wireless LAN
 Soft blocked: no
 Hard blocked: no
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

                    Channel:1
                    Frequency:2.412 GHz (Channel 1)
                    ESSID:"d0wN 0n Th3 h1ll"
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    ESSID:"GoPackGO"
                    Channel:6
                    Frequency:2.437 GHz (Channel 6)
                    ESSID:"cdmdstuwireless"
auto lo
iface lo inet loopback

DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=12.04
DISTRIB_CODENAME=precise
DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS"
00:0a.0 Bridge [0680]: NVIDIA Corporation CK804 Ethernet Controller [10de:0057] (rev f3)
 Subsystem: Elitegroup Computer Systems Device [1019:1b13]
 Kernel driver in use: forcedeth
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 045e:076e Microsoft Corp.
Bus 001 Device 004: ID 13b1:003b Linksys
Bus 001 Device 005: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 002 Device 002: ID 046d:c52e Logitech, Inc.
Bus 001 Device 006: ID 1737:0079 Linksys WUSB600N v2 Dual-Band Wireless-N Network Adapter [Ralink RT3572]
RUNNING STATE WIFI-HARDWARE WIFI WWAN-HARDWARE WWAN
running connected enabled enabled enabled disabled
H/W path Device Class Description
================================================
                         system Computer
/0 bus Motherboard
/0/0 memory 128KiB BIOS
/0/3 memory 1MiB BIOS
/0/5 memory 1MiB BIOS
/0/6 memory 1MiB BIOS
/0/f memory 1MiB BIOS
/0/10 memory 1MiB BIOS
/0/11 memory 1MiB BIOS
/0/12 memory 1MiB BIOS
/0/13 memory 1MiB BIOS
/0/14 memory 1MiB BIOS
/0/15 memory 1MiB BIOS
/0/16 memory 1MiB BIOS
/0/17 memory 1MiB BIOS
/0/18 memory 1MiB BIOS
/0/19 memory 1MiB BIOS
/0/1a memory 1MiB BIOS
/0/1b memory 1MiB BIOS
/0/1c memory 1MiB BIOS
/0/1e memory 1MiB BIOS
/0/1f memory 1MiB BIOS
/0/20 memory 1MiB BIOS
/0/21 memory 1MiB BIOS
/0/22 memory 1MiB BIOS
/0/23 memory 1MiB BIOS
/0/24 memory 1MiB BIOS
/0/25 memory 1MiB BIOS
/0/26 memory 1MiB BIOS
/0/27 memory 1MiB BIOS
/0/28 memory 1MiB BIOS
/0/29 memory 1MiB BIOS
/0/2a memory 1MiB BIOS
/0/2b memory 1MiB BIOS
/0/2c memory 1MiB BIOS
/0/2d memory 1MiB BIOS
/0/2e memory 1MiB BIOS
/0/2f memory 1MiB BIOS
/0/30 memory 1MiB BIOS
/0/31 memory 1MiB BIOS
/0/32 memory 1MiB BIOS
/0/33 memory 1MiB BIOS
/0/34 memory 896KiB BIOS
/0/35 memory 1MiB BIOS
/0/2000 memory 991KiB BIOS
/0/36 memory 1023KiB BIOS
/0/37 processor AMD Athlon(tm) 64 X2 Dual Core Processor 42
/0/37/c memory 128KiB L1 cache
/0/37/d memory 512KiB L2 cache
/0/1d memory 6GiB System Memory
/0/1d/0 memory 1GiB DIMM
/0/1d/1 memory 1GiB DIMM
/0/1d/2 memory 2GiB DIMM
/0/1d/3 memory 2GiB DIMM
/0/38 memory Memory controller
/0/1 bridge CK804 ISA Bridge
/0/1.1 bus CK804 SMBus
/0/2 bus CK804 USB Controller
/0/2.1 bus CK804 USB Controller
/0/4 multimedia CK804 AC'97 Audio Controller
/0/39 scsi3 storage CK804 IDE
/0/39/0.0.0 /dev/cdrom disk CD/DVDW SH-S182D
/0/7 scsi0 storage CK804 Serial ATA Controller
/0/7/0 /dev/sda disk 500GB WDC WD5000AAKS-0
/0/7/0/1 /dev/sda1 volume 100MiB Windows NTFS volume
/0/7/0/2 /dev/sda2 volume 346GiB Windows NTFS volume
/0/7/0/3 /dev/sda3 volume 118GiB Extended partition
/0/7/0/3/5 /dev/sda5 volume 6141MiB Linux swap / Solaris partition
/0/7/0/3/6 /dev/sda6 volume 106GiB Linux filesystem partition
/0/7/0/3/7 /dev/sda7 volume 6139MiB Linux swap / Solaris partition
/0/7/1 /dev/sdb disk 250GB WDC WD2500JS-00S
/0/7/1/1 /dev/sdb1 volume 232GiB Windows NTFS volume
/0/8 storage CK804 Serial ATA Controller
/0/9 bridge CK804 PCI Bridge
/0/a eth0 bridge CK804 Ethernet Controller
/0/b bridge CK804 PCIE Bridge
/0/c bridge CK804 PCIE Bridge
/0/d bridge CK804 PCIE Bridge
/0/e bridge CK804 PCIE Bridge
/0/e/0 display RV630 [Radeon HD 2600XT]
/0/e/0.1 multimedia RV630 audio device [Radeon HD 2600 Series]
/0/100 bridge K8 [Athlon64/Opteron] HyperTransport Techno
/0/101 bridge K8 [Athlon64/Opteron] Address Map
/0/102 bridge K8 [Athlon64/Opteron] DRAM Controller
/0/103 bridge K8 [Athlon64/Opteron] Miscellaneous Control
/0/3a scsi6 storage
/0/3a/0.0.0 /dev/sdc disk SCSI Disk
/0/3a/0.0.1 /dev/sdd disk SCSI Disk
/0/3a/0.0.2 /dev/sde disk SCSI Disk
/0/3a/0.0.3 /dev/sdf disk SCSI Disk
/1 wlan0 network Wireless interface
Linux shaun 3.2.0-41-generic #66-Ubuntu SMP Thu Apr 25 03:27:11 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
[ 0.000000] No AGP bridge found
[ 0.000000] found SMP MP-table at [ffff8800000f3c70] f3c70
[ 0.000000] No NUMA configuration found
[ 0.000000] No AGP bridge found
[ 0.036002] ..... (found apic 0 pin 0) ...
[ 0.215952] ACPI: No dock devices found.
[ 0.215956] HEST: Table not found.
[ 0.260389] i2c-core: driver [aat2870] using legacy suspend method
[ 0.260391] i2c-core: driver [aat2870] using legacy resume method
[ 0.260650] usbcore: registered new interface driver usbfs
[ 0.260665] usbcore: registered new interface driver hub
[ 0.260702] usbcore: registered new device driver usb
[ 0.279731] pnp: PnP ACPI: found 12 devices
[ 0.286436] Switching to clocksource acpi_pm
[ 0.364235] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364272] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364277] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[ 0.364284] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364325] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364330] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[ 0.364337] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364380] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364385] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[ 0.364392] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364438] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.364443] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[ 0.364450] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.408339] ERST: Table is not found!
[ 0.624208] hub 1-0:1.0: USB hub found
[ 0.682147] hub 2-0:1.0: USB hub found
[ 0.682319] usbcore: registered new interface driver libusual
[ 0.682367] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.693907] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 0.694044] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.803128] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.803335] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.803340] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.052028] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 1.312029] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[ 1.324862] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:21:3c:36:87
[ 1.324868] forcedeth 0000:00:0a.0: highdma csum lnktim desc-v3
[ 1.572026] usb 1-5: new high-speed USB device number 5 using ehci_hcd
[ 1.710142] scsi6 : usb-storage 1-5:1.0
[ 1.710237] usbcore: registered new interface driver usb-storage
[ 2.008031] usb 2-2: new full-speed USB device number 2 using ohci_hcd
[ 2.257390] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input2
[ 2.257498] generic-usb 0003:046D:C52E.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:02.0-2/input0
[ 2.264750] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.1/input/input3
[ 2.264928] generic-usb 0003:046D:C52E.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.0-2/input1
[ 2.264949] usbcore: registered new interface driver usbhid
[ 2.264952] usbhid: USB HID core driver
[ 15.366102] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.642699] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 15.705229] lp: driver loaded but no devices found
[ 16.005502] uvcvideo: Found UVC 1.00 device Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-5001 (045e:076e)
[ 16.010425] input: Microsoft\xffffffc2\xffffffae\xffffffae LifeCam HD-5001 as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input4
[ 16.010532] usbcore: registered new interface driver uvcvideo
[ 17.103404] forcedeth 0000:00:0a.0: eth0: no link during initialization
[ 17.104969] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.105359] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.125012] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/0000:05:00.1/sound/card1/input5
[ 17.219605] type=1400 audit(1367689934.019:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1019 comm="apparmor_parser"
[ 18.077924] usbcore: registered new interface driver snd-usb-audio
[ 18.166190] Console: switching to colour frame buffer device 175x65
[ 76.716027] usb 1-6: new high-speed USB device number 6 using ehci_hcd
[ 76.933972] cfg80211: Calling CRDA to update world regulatory domain
[ 76.942329] cfg80211: World regulatory domain updated:
[ 76.942334] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 76.942337] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 76.942340] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 76.942343] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 76.942346] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 76.942349] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.160029] usb 1-6: reset high-speed USB device number 6 using ehci_hcd
[ 77.316873] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316877] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316879] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316882] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316885] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316888] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316890] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316893] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316896] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316899] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316901] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316904] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316906] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316912] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316915] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316917] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316920] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316923] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316926] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316928] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316931] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316933] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316936] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 77.316939] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316942] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 77.316944] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316947] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 77.316950] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316953] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316956] cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316959] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316961] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316964] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316967] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316970] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316972] cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316975] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316978] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[ 77.316981] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.316983] cfg80211: Disabling freq 5260 MHz
[ 77.316984] cfg80211: Disabling freq 5270 MHz
[ 77.316986] cfg80211: Disabling freq 5280 MHz
[ 77.316988] cfg80211: Disabling freq 5300 MHz
[ 77.316989] cfg80211: Disabling freq 5310 MHz
[ 77.316991] cfg80211: Disabling freq 5320 MHz
[ 77.316992] cfg80211: Disabling freq 5500 MHz
[ 77.316994] cfg80211: Disabling freq 5510 MHz
[ 77.316996] cfg80211: Disabling freq 5520 MHz
[ 77.316997] cfg80211: Disabling freq 5540 MHz
[ 77.316999] cfg80211: Disabling freq 5550 MHz
[ 77.317001] cfg80211: Disabling freq 5560 MHz
[ 77.317002] cfg80211: Disabling freq 5580 MHz
[ 77.317004] cfg80211: Disabling freq 5590 MHz
[ 77.317005] cfg80211: Disabling freq 5600 MHz
[ 77.317007] cfg80211: Disabling freq 5620 MHz
[ 77.317009] cfg80211: Disabling freq 5630 MHz
[ 77.317011] cfg80211: Disabling freq 5640 MHz
[ 77.317012] cfg80211: Disabling freq 5660 MHz
[ 77.317014] cfg80211: Disabling freq 5670 MHz
[ 77.317015] cfg80211: Disabling freq 5680 MHz
[ 77.317017] cfg80211: Disabling freq 5700 MHz
[ 77.317019] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[ 77.317022] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.317024] cfg80211: Updating information on frequency 5755 MHz for a 20 MHz width channel with regulatory rule:
[ 77.317027] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.317030] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[ 77.317033] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.317035] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[ 77.317038] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.317041] cfg80211: Updating information on frequency 5795 MHz for a 20 MHz width channel with regulatory rule:
[ 77.317044] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.317046] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[ 77.317049] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.317052] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[ 77.317055] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 77.317057] cfg80211: Disabling freq 5835 MHz
[ 77.317058] cfg80211: Disabling freq 5845 MHz
[ 77.317060] cfg80211: Disabling freq 5855 MHz
[ 77.317062] cfg80211: Disabling freq 5865 MHz
[ 77.352223] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 77.352867] Registered led device: rt2800usb-phy0::radio
[ 77.352891] Registered led device: rt2800usb-phy0::assoc
[ 77.352917] Registered led device: rt2800usb-phy0::quality
[ 77.352939] usbcore: registered new interface driver rt2800usb
[ 77.686047] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 77.687631] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 85.125950] wlan0: authenticate with 20:aa:4b:99:d0:7a (try 1)
[ 85.127491] wlan0: authenticated
[ 85.148201] wlan0: associate with 20:aa:4b:99:d0:7a (try 1)
[ 85.151255] wlan0: RX AssocResp from 20:aa:4b:99:d0:7a (capab=0x411 status=0 aid=5)
[ 85.151260] wlan0: associated
[ 85.186542] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 503.043672] cfg80211: Found new beacon on frequency: 5785 MHz (Ch 157) on phy0
 Release Date: 09/23/2006
  Serial services are supported (int 14h)
 Manufacturer:
 Product Name:
 Serial Number:
 Release Date: Not Specified
lo no wireless extensions.

wlan0 IEEE 802.11abgn ESSID:"d0wN 0n Th3 h1ll"
          Mode:Managed Frequency:2.412 GHz Access Point: 20:AA:4B:99:D0:7A
          Bit Rate=115.6 Mb/s Tx-Power=20 dBm
          Retry long limit:7 RTS thr:off Fragment thr:off
          Power Management:on
          Link Quality=63/70 Signal level=-47 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:69 Invalid misc:145 Missed beacon:0

eth0 no wireless extensions.

install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS && { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# which ath5k cannot recover. To prevent this condition, stop
blacklist ath_pci
blacklist eth1394
# replaced by p54pci
blacklist prism54
# replaced by b43 and ssb.
blacklist bcm43xx
blacklist uart6850
blacklist twl4030_wdt

[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true
> hal.1: read hal dataprocess 2728: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282.
This is normally a bug in some application using the D-Bus library.
libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files
20: PCI 0a.0: 0200 Ethernet controller
  [Created at pci.318]
  Unique ID: rBUF.jRtzOetWUS3
  SysFS ID: /devices/pci0000:00/0000:00:0a.0
  SysFS BusID: 0000:00:0a.0
  Hardware Class: network
  Model: "nVidia CK804 Ethernet Controller"
  Vendor: pci 0x10de "nVidia Corporation"
  Device: pci 0x0057 "CK804 Ethernet Controller"
  SubVendor: pci 0x1019 "Elitegroup Computer Systems"
  SubDevice: pci 0x1b13
  Revision: 0xf3
  Driver: "forcedeth"
  Driver Modules: "forcedeth"
  Device File: eth0
  Memory Range: 0xfe02a000-0xfe02afff (rw,non-prefetchable)
  I/O Ports: 0xbc00-0xbc07 (rw)
  IRQ: 23 (5640 events)
  HW Address: 00:19:21:3c:36:87
  Link detected: no
  Module Alias: "pci:v000010DEd00000057sv00001019sd00001B13bc06sc80i00"
  Driver Info #0:
    Driver Status: forcedeth is active
    Driver Activation Cmd: "modprobe forcedeth"
  Config Status: cfg=new, avail=yes, need=no, active=unknown

42: USB 00.0: 0282 WLAN controller
  [Created at usb.122]
  Unique ID: MtLc.f5+qsy1PmxF
  Parent ID: k4bc.OqydEZZ981A
  SysFS ID: /devices/pci0000:00/0000:00:02.1/usb1/1-6/1-6:1.0
  SysFS BusID: 1-6:1.0
  Hardware Class: network
  Model: "Linksys WUSB600N Wireless-N USB Network Adapter with Dual-Band ver. 2"
  Hotplug: USB
  Vendor: usb 0x1737 "Linksys"
  Device: usb 0x0079 "Linksys WUSB600N Wireless-N USB Network Adapter with Dual-Band ver. 2"
  Revision: "1.01"
  Driver: "rt2800usb"
  Driver Modules: "rt2800usb"
  Device File: wlan0
  Features: WLAN
  Speed: 480 Mbps
  HW Address: 00:25:9c:e2:79:39
  Link detected: yes
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 36 38 40 44 46 48 149 151 153 157 159 161 165
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484 5.18 5.19 5.2 5.22 5.23 5.24 5.745 5.755 5.765 5.785 5.795 5.805 5.825
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "usb:v1737p0079d0101dc00dsc00dp00icFFiscFFipFF"
  Driver Info #0:
    Driver Status: rt2800usb is active
    Driver Activation Cmd: "modprobe rt2800usb"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #32 (Hub)
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
root 955 0.0 0.0 239832 5476 ? Ssl 13:52 0:00 NetworkManager
root 2064 0.0 0.0 31716 2280 ? Ss 13:53 0:00 /sbin/wpa_supplicant -B -P /run/sendsigs.omit.d/wpasupplicant.pid -u -s -O /var/run/wpa_supplicant
root 2152 0.0 0.0 7264 1472 ? S 13:53 0:00 /sbin/dhclient -d -4 -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/sendsigs.omit.d/network-manager.dhclient-wlan0.pid -lf /var/lib/dhcp/dhclient-5ee2fda8-a320-402b-bc49-3102989dd9c0-wlan0.lease -cf /var/run/nm-dhclient-wlan0.conf wlan0
nobody 2195 0.0 0.0 33020 1252 ? S 13:53 0:00 /usr/sbin/dnsmasq --no-resolv --keep-in-foreground --no-hosts --bind-interfaces --pid-file=/var/run/sendsigs.omit.d/network-manager.dnsmasq.pid --listen-address=127.0.0.1 --conf-file=/var/run/nm-dns-dnsmasq.conf --cache-size=0 --proxy-dnssec
shaun 2744 0.0 0.0 13584 860 pts/2 S+ 14:02 0:00 egrep --color=auto wpa|icd|etwork
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 wlan0
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0
# Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)
# DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN
nameserver 127.0.0.1
Module Size Used by
arc4 12529 2
rt2800usb 22773 0
rt2800lib 58967 1 rt2800usb
crc_ccitt 12707 1 rt2800lib
rt2x00usb 20808 1 rt2800usb
rt2x00lib 55326 3 rt2800usb,rt2800lib,rt2x00usb
mac80211 506862 3 rt2800lib,rt2x00usb,rt2x00lib
cfg80211 205774 2 rt2x00lib,mac80211
vesafb 13844 1
bnep 18281 2
rfcomm 47604 0
bluetooth 180153 10 bnep,rfcomm
fglrx 3264017 125
snd_hda_codec_hdmi 32474 1
snd_usb_audio 122982 1
snd_hda_intel 33719 2
snd_hda_codec 127706 2 snd_hda_codec_hdmi,snd_hda_intel
snd_intel8x0 38570 2
snd_ac97_codec 134869 1 snd_intel8x0
ac97_bus 12730 1 snd_ac97_codec
snd_pcm 97275 6 snd_hda_codec_hdmi,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_intel8x0,snd_ac97_codec
snd_hwdep 17764 2 snd_usb_audio,snd_hda_codec
snd_usbmidi_lib 29476 1 snd_usb_audio
snd_seq_midi 13324 0
edac_core 53746 0
snd_rawmidi 30748 2 snd_usbmidi_lib,snd_seq_midi
psmouse 97485 0
snd_seq_midi_event 14899 1 snd_seq_midi
snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event
snd_timer 29990 2 snd_pcm,snd_seq
snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq
ppdev 17113 0
snd 79041 23 snd_hda_codec_hdmi,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_hwdep,snd_usbmidi_lib,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
serio_raw 13211 0
soundcore 15091 1 snd
parport_pc 32866 1
uvcvideo 72627 0
videodev 98259 1 uvcvideo
edac_mce_amd 23709 0
k8temp 13057 0
snd_page_alloc 18529 3 snd_hda_intel,snd_intel8x0,snd_pcm
i2c_nforce2 13058 0
v4l2_compat_ioctl32 17128 1 videodev
joydev 17693 0
mac_hid 13253 0
lp 17799 0
parport 46562 3 ppdev,parport_pc,lp
usbhid 47238 0
hid 99636 1 usbhid
usb_storage 49198 0
floppy 70207 0
pata_amd 14118 0
sata_nv 32286 2
forcedeth 63460 0

Revision history for this message
Shaun Phillips (bldrofshadows) said :
#4

I hope that this helps.

Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#5

The following Terminal output shows several issues:

wlan0 IEEE 802.11abgn ESSID:"d0wN 0n Th3 h1ll"
          Mode:Managed Frequency:2.412 GHz Access Point: 20:AA:4B:99:D0:7A
          Bit Rate=115.6 Mb/s Tx-Power=20 dBm
          Retry long limit:7 RTS thr:off Fragment thr:off
          Power Management:on
          Link Quality=63/70 Signal level=-47 dBm
          Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
          Tx excessive retries:69 Invalid misc:145 Missed beacon:0

1) First issue is the SSID name: d0wN 0n Th3 h1ll

I suggest logging into the webpage of your wireless router and changing the SSID name of the router into a name without any spaces in it.

2) The bit rate of 115.6 Mb/s is too high and probably causing the stability
issues.

I suggest logging into the homepage of your wireless router and forcing
the router to use Wireless-G (54 Mb/s) speeds.

Anything higher than 54 Mb/s will likely cause wireless disconnects. The wireless driver probably cannot handle speeds higher dan 54 Mb/s

Once the 2 issues are resolved, please retest wireless.

Revision history for this message
Shaun Phillips (bldrofshadows) said :
#6

kk will do

On Sat, May 4, 2013 at 3:41 PM, Mark Rijckenberg <
<email address hidden>> wrote:

> Your question #227638 on Ubuntu changed:
> https://answers.launchpad.net/ubuntu/+question/227638
>
> Status: Open => Answered
>
> Mark Rijckenberg proposed the following answer:
> The following Terminal output shows several issues:
>
> wlan0 IEEE 802.11abgn ESSID:"d0wN 0n Th3 h1ll"
> Mode:Managed Frequency:2.412 GHz Access Point: 20:AA:4B:99:D0:7A
> Bit Rate=115.6 Mb/s Tx-Power=20 dBm
> Retry long limit:7 RTS thr:off Fragment thr:off
> Power Management:on
> Link Quality=63/70 Signal level=-47 dBm
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:69 Invalid misc:145 Missed beacon:0
>
> 1) First issue is the SSID name: d0wN 0n Th3 h1ll
>
> I suggest logging into the webpage of your wireless router and changing
> the SSID name of the router into a name without any spaces in it.
>
> 2) The bit rate of 115.6 Mb/s is too high and probably causing the
> stability
> issues.
>
> I suggest logging into the homepage of your wireless router and forcing
> the router to use Wireless-G (54 Mb/s) speeds.
>
> Anything higher than 54 Mb/s will likely cause wireless disconnects. The
> wireless driver probably cannot handle speeds higher dan 54 Mb/s
>
> Once the 2 issues are resolved, please retest wireless.
>
> --
> If this answers your question, please go to the following page to let us
> know that it is solved:
> https://answers.launchpad.net/ubuntu/+question/227638/+confirm?answer_id=4
>
> If you still need help, you can reply to this email or go to the
> following page to enter your feedback:
> https://answers.launchpad.net/ubuntu/+question/227638
>
> You received this question notification because you asked the question.
>

Revision history for this message
Mark Rijckenberg (markrijckenberg) said :
#7

Please use the "just add a comment" button, if there are no pending questions in this thread.

Setting thread status back to "answered".

Can you help with this problem?

Provide an answer of your own, or ask Shaun Phillips for more information if necessary.

To post a message you must log in.