my Ubuntu are not booting

Asked by glavkos

After today s update i tried to reboot Ubuntu 9.10...but i came to a new screen (command prompt Grub 1,97 beta) ...after trying to get to Ubuntu i am afraid i destoyed both boots sectors of Vista and Ubuntu 9.10 ..I followed the instructions here

http://ubuntuforums.org/showthread.php?p=8419792#post8419792 and here
http://ubuntuforums.org/showthread.php?t=1195275

but still no results ...and seems i have no laptop to work ...I tried to recover Vista with a recovery cd and it failed ...

I install again Ubuntu with 3 partitions but the problem remains , as Grub seems to stay unchangable

..............please tell me what to do , Glavkos

Question information

Language:
English Edit question
Status:
Solved
For:
NULL Project Edit question
Assignee:
No assignee Edit question
Solved by:
glavkos
Solved:
Last query:
Last reply:
Revision history for this message
glavkos (glavkos) said :
#1

I re-installed ubuntu with a new partition

oot@glavkos-laptop:~# fdisk -l

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xbbc58b91

   Device Boot Start End Blocks Id System
/dev/sda1 * 1 1020 8192000 c W95 FAT32 (LBA)
Partition 1 does not end on cylinder boundary.
/dev/sda2 1020 6797 46403320+ 7 HPFS/NTFS
/dev/sda3 6798 19458 101692091 f W95 Ext'd (LBA)
Partition 3 does not end on cylinder boundary.
/dev/sda5 12083 19458 59236352 7 HPFS/NTFS
/dev/sda6 6798 11860 40668516 83 Linux
/dev/sda7 11861 12082 1783183+ 82 Linux swap / Solaris

This time Grub works fine ...but i can not still load my Vista.
I try to load Vista from the sda2 partition ...If i try sda1 (i think the recovery mode), will that affect Grub again?

Revision history for this message
glavkos (glavkos) said :
#2

Unistalled Vista...Full installation of Ubuntu 9.10 again.

Revision history for this message
Joyce A. Rivera (pacee12) said (last edit ):
#32
Revision history for this message
Carolyn212 (carolyn112) said :
#38

It helped me on a current project, thank you!
https://www.kmfusa.one/

Revision history for this message
Josefa T. Bulkley (josefa463643) said :
#39

good job, buddy I've read a few of the articles you've placed on your blog. I just want to express my admiration for your blog and your work. I appreciate you making these posts here.

https://kantimemedicare.one/

Revision history for this message
Adela N. Merritt (adela523) said :
#40

It helped me on a current project, thank you so much!

Revision history for this message
tedclass (tedclass) said :
#41

If your Ubuntu is not booting, there could be several reasons why this is happening. Here are some steps you can take to troubleshoot the issue:

Check your hardware: Make sure that all hardware components are properly connected and functioning correctly. Check that the power supply is working, the hard drive is properly connected, and that there are no loose cables or connections.

Check your BIOS settings: Make sure that your BIOS settings are configured correctly. Check that the boot order is set to boot from the correct device, such as the hard drive or USB drive.

Use recovery mode: If your Ubuntu installation is still not booting, try booting into recovery mode. This mode provides a limited set of options for troubleshooting and repairing your system.

Check your file system: If your Ubuntu installation is still not booting, it could be due to file system errors. Boot into recovery mode and run a file system check using the "fsck" command.

Reinstall Ubuntu: If all else fails, you may need to reinstall Ubuntu. Make sure to back up your important data before doing so.

These are just a few steps you can take to troubleshoot an Ubuntu installation that is not booting. Depending on the specific issue, there may be other steps you can take to resolve the issue. https://www.myeclass.one/

Revision history for this message
lowergm (lowergm) said :
#42

I thought I would find several playlists of metal. But I'm gonna try some anyway :)
https://www.kdealer.one/

Revision history for this message
davidpay (davidpay) said :
#43

It helped me on a current project, thank you!
https://www.paybyplatema.life/

Revision history for this message
SuzanneIllazi (grantelliot) said :
#44

Thank you for sharing in this article I can a lot and could also be a reference I hope to read the next your article update https://paybyplatema.site/

Revision history for this message
HarryMax (moon-8060) said :
#45

I couldn’t refrain from commenting. Exceptionally well written! https://demonslayeroutlet.com/collections/demon-slayer-pajamas/

Revision history for this message
carledirect (carledirect) said :
#46

That is what I was looking for, what information, present here at this site!
https://www.njmcdirect.run/

Revision history for this message
Kiara Smith (kiarasmith) said :
#47

Thank You for the help on my current project. https://kmfusa.website/

Revision history for this message
jackwill (jackwill1122) said (last edit ):
#48

thanks for the amazing content you can have high quality content