ntfs-config

After install NTFS-config 3x internal OK, ext USB not ok

Asked by jUbuntu

Good day.

I post my question here on advice of Szaka of the NTFS-3G Support Forum.

Tis is my question of that forum:
I am new to Linux, installed Ubuntu some months ago and this week it saved me when XP crashed. A definit reason for me to switch to Linux.

At first I saw all my old ntfs partitions on the desktop; however some times (minority) my USB disk was gone.

Anyhow, all ntfs drives were RO.
I installed ntfs-config automatically (with int + ext write support enabled).
Now I can RW my internal ntfs drives but the external doesn't show up on my desktop.
I would appreciate some help. I am not a computer illiterate but I am on Linux.

PC: dual core Intel Pentium Medion; internal 200G 3xntfs partition, 1x Ubuntu, ext hd Medion 500G

Thanks, jd

Question information

Language:
English Edit question
Status:
Answered
For:
ntfs-config Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
Florent Mertens (givre) said : 		#1

What version of ubuntu do you run ?

Revision history for this message
jUbuntu (jdhaasnoot) said : 		#2

Hello, thanks for your time.

I rebooted via Grub: Ubuntu 2.6.20-16 generic.

regards jd

Revision history for this message
Florent Mertens (givre) said : 		#3

This means you have feisty installed.
Plug your USB disk and paste here the result of
$ lshal
from a terminal. At least the useful part.

Thanks

Revision history for this message
jUbuntu (jdhaasnoot) said : 		#4

Florent, indeed Feisty.

I plugged in the USB stick, a new disk icon appeared on the desktop and I can do RW actions.

I am not sure but I think terminal truncated the first part; hope the info you look for is in this.
If I need to use parameters please specify (I am a Linux newby).

regards

usb_device.version_bcd = 512 (0x200) (int)
  usb_device.speed_bcd = 294912 (0x48000) (int)
  usb_device.linux.device_number = 6 (0x6) (int)
  usb_device.num_ports = 0 (0x0) (int)
  usb_device.max_power = 300 (0x12c) (int)
  usb_device.device_revision_bcd = 1 (0x1) (int)
  info.product = '802.11g WLAN' (string)
  usb_device.product = '802.11g WLAN' (string)
  info.vendor = 'Ralink' (string)
  usb_device.vendor = 'Ralink' (string)
  usb_device.product_id = 9584 (0x2570) (int)
  usb_device.vendor_id = 5263 (0x148f) (int)
  usb_device.device_protocol = 0 (0x0) (int)
  usb_device.device_subclass = 0 (0x0) (int)
  usb_device.device_class = 0 (0x0) (int)
  usb_device.num_interfaces = 1 (0x1) (int)
  usb_device.num_configurations = 1 (0x1) (int)
  usb_device.configuration_value = 1 (0x1) (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.2' (string)
  info.linux.driver = 'usb' (string)
  info.bus = 'usb_device' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_5e3_606_noserial' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.2' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.2' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_148f_2570_noserial_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_148f_2570_noserial_usbraw' (string)
  linux.device_file = '/dev/bus/usb/005/006' (string)
  linux.subsystem = 'usb_device' (string)
  linux.hotplug_type = 2 (0x2) (int)
  usbraw.device = '/dev/bus/usb/005/006' (string)
  info.product = 'USB Raw Device Access' (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_148f_2570_noserial' (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev5.6' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_148f_2570_noserial_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_148f_2570_noserial_if0' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB Vendor Specific Interface' (string)
  usb.interface.protocol = 255 (0xff) (int)
  usb.interface.subclass = 255 (0xff) (int)
  usb.interface.class = 255 (0xff) (int)
  usb.interface.number = 0 (0x0) (int)
  info.linux.driver = 'rt2570' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.2/5-3.2:1.0' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 1 (0x1) (int)
  usb.device_class = 0 (0x0) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.vendor_id = 5263 (0x148f) (int)
  usb.product_id = 9584 (0x2570) (int)
  usb.vendor = 'Ralink' (string)
  usb.product = 'USB Vendor Specific Interface' (string)
  usb.device_revision_bcd = 1 (0x1) (int)
  usb.max_power = 300 (0x12c) (int)
  usb.num_ports = 0 (0x0) (int)
  usb.linux.device_number = 6 (0x6) (int)
  usb.speed_bcd = 294912 (0x48000) (int)
  usb.version_bcd = 512 (0x200) (int)
  usb.is_self_powered = false (bool)
  usb.can_wake_up = false (bool)
  usb.bus_number = 5 (0x5) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_148f_2570_noserial' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.2/5-3.2:1.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-3/5-3.2/5-3.2:1.0' (string)

udi = '/org/freedesktop/Hal/devices/net_00_12_bf_63_a6_cd'
  info.udi = '/org/freedesktop/Hal/devices/net_00_12_bf_63_a6_cd' (string)
  linux.subsystem = 'net' (string)
  linux.hotplug_type = 2 (0x2) (int)
  net.80211.mac_address = 80520390349 (0x12bf63a6cd) (uint64)
  info.product = 'WLAN Interface' (string)
  net.arp_proto_hw_id = 1 (0x1) (int)
  net.linux.ifindex = 3 (0x3) (int)
  net.address = '00:12:bf:63:a6:cd' (string)
  net.interface = 'rausb1' (string)
  net.physical_device = '/org/freedesktop/Hal/devices/usb_device_148f_2570_noserial_if0' (string)
  info.capabilities = {'net', 'net.80211'} (string list)
  info.category = 'net.80211' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_148f_2570_noserial_if0' (string)
  linux.sysfs_path = '/sys/class/net/rausb1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7_if0' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB Hub Interface' (string)
  usb.interface.protocol = 0 (0x0) (int)
  usb.interface.subclass = 0 (0x0) (int)
  usb.interface.class = 9 (0x9) (int)
  usb.interface.number = 0 (0x0) (int)
  info.linux.driver = 'hub' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 1 (0x1) (int)
  usb.device_class = 9 (0x9) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 1 (0x1) (int)
  usb.vendor_id = 0 (0x0) (int)
  usb.product_id = 0 (0x0) (int)
  usb.vendor = 'Linux 2.6.20-16-generic ehci_hcd' (string)
  usb.product = 'USB Hub Interface' (string)
  usb.device_revision_bcd = 518 (0x206) (int)
  usb.max_power = 0 (0x0) (int)
  usb.num_ports = 8 (0x8) (int)
  usb.linux.device_number = 1 (0x1) (int)
  usb.serial = '0000:00:1d.7' (string)
  usb.speed_bcd = 294912 (0x48000) (int)
  usb.version_bcd = 512 (0x200) (int)
  usb.is_self_powered = true (bool)
  usb.can_wake_up = true (bool)
  usb.bus_number = 5 (0x5) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_7' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.7/usb5/5-0:1.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27cb'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string)
  linux.subsystem = 'pci' (string)
  linux.hotplug_type = 1 (0x1) (int)
  pci.subsys_product = 'Unknown (0x7204)' (string)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.' (string)
  info.product = '82801G (ICH7 Family) USB UHCI #4' (string)
  pci.product = '82801G (ICH7 Family) USB UHCI #4' (string)
  info.vendor = 'Intel Corporation' (string)
  pci.vendor = 'Intel Corporation' (string)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 3 (0x3) (int)
  pci.device_class = 12 (0xc) (int)
  pci.subsys_vendor_id = 5218 (0x1462) (int)
  pci.subsys_product_id = 29188 (0x7204) (int)
  pci.vendor_id = 32902 (0x8086) (int)
  pci.product_id = 10187 (0x27cb) (int)
  info.linux.driver = 'uhci_hcd' (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.bus = 'pci' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  usb_device.bus_number = 4 (0x4) (int)
  usb_device.can_wake_up = true (bool)
  usb_device.is_self_powered = true (bool)
  usb_device.version_bcd = 272 (0x110) (int)
  usb_device.speed_bcd = 4608 (0x1200) (int)
  usb_device.serial = '0000:00:1d.3' (string)
  usb_device.linux.device_number = 1 (0x1) (int)
  usb_device.num_ports = 2 (0x2) (int)
  usb_device.max_power = 0 (0x0) (int)
  usb_device.device_revision_bcd = 518 (0x206) (int)
  info.product = 'UHCI Host Controller' (string)
  usb_device.product = 'UHCI Host Controller' (string)
  info.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb_device.product_id = 0 (0x0) (int)
  usb_device.vendor_id = 0 (0x0) (int)
  usb_device.device_protocol = 0 (0x0) (int)
  usb_device.device_subclass = 0 (0x0) (int)
  usb_device.device_class = 9 (0x9) (int)
  usb_device.num_interfaces = 1 (0x1) (int)
  usb_device.num_configurations = 1 (0x1) (int)
  usb_device.configuration_value = 1 (0x1) (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string)
  info.linux.driver = 'usb' (string)
  info.bus = 'usb_device' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27cb' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_usbraw' (string)
  linux.device_file = '/dev/bus/usb/004/001' (string)
  linux.subsystem = 'usb_device' (string)
  linux.hotplug_type = 2 (0x2) (int)
  usbraw.device = '/dev/bus/usb/004/001' (string)
  info.product = 'USB Raw Device Access' (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev4.1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3_if0' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB Hub Interface' (string)
  usb.interface.protocol = 0 (0x0) (int)
  usb.interface.subclass = 0 (0x0) (int)
  usb.interface.class = 9 (0x9) (int)
  usb.interface.number = 0 (0x0) (int)
  info.linux.driver = 'hub' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 1 (0x1) (int)
  usb.device_class = 9 (0x9) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.vendor_id = 0 (0x0) (int)
  usb.product_id = 0 (0x0) (int)
  usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb.product = 'USB Hub Interface' (string)
  usb.device_revision_bcd = 518 (0x206) (int)
  usb.max_power = 0 (0x0) (int)
  usb.num_ports = 2 (0x2) (int)
  usb.linux.device_number = 1 (0x1) (int)
  usb.serial = '0000:00:1d.3' (string)
  usb.speed_bcd = 4608 (0x1200) (int)
  usb.version_bcd = 272 (0x110) (int)
  usb.is_self_powered = true (bool)
  usb.can_wake_up = true (bool)
  usb.bus_number = 4 (0x4) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_3' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-0:1.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27ca'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string)
  linux.subsystem = 'pci' (string)
  linux.hotplug_type = 1 (0x1) (int)
  pci.subsys_product = 'Unknown (0x7204)' (string)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.' (string)
  info.product = '82801G (ICH7 Family) USB UHCI #3' (string)
  pci.product = '82801G (ICH7 Family) USB UHCI #3' (string)
  info.vendor = 'Intel Corporation' (string)
  pci.vendor = 'Intel Corporation' (string)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 3 (0x3) (int)
  pci.device_class = 12 (0xc) (int)
  pci.subsys_vendor_id = 5218 (0x1462) (int)
  pci.subsys_product_id = 29188 (0x7204) (int)
  pci.vendor_id = 32902 (0x8086) (int)
  pci.product_id = 10186 (0x27ca) (int)
  info.linux.driver = 'uhci_hcd' (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.bus = 'pci' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  usb_device.bus_number = 3 (0x3) (int)
  usb_device.can_wake_up = true (bool)
  usb_device.is_self_powered = true (bool)
  usb_device.version_bcd = 272 (0x110) (int)
  usb_device.speed_bcd = 4608 (0x1200) (int)
  usb_device.serial = '0000:00:1d.2' (string)
  usb_device.linux.device_number = 1 (0x1) (int)
  usb_device.num_ports = 2 (0x2) (int)
  usb_device.max_power = 0 (0x0) (int)
  usb_device.device_revision_bcd = 518 (0x206) (int)
  info.product = 'UHCI Host Controller' (string)
  usb_device.product = 'UHCI Host Controller' (string)
  info.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb_device.product_id = 0 (0x0) (int)
  usb_device.vendor_id = 0 (0x0) (int)
  usb_device.device_protocol = 0 (0x0) (int)
  usb_device.device_subclass = 0 (0x0) (int)
  usb_device.device_class = 9 (0x9) (int)
  usb_device.num_interfaces = 1 (0x1) (int)
  usb_device.num_configurations = 1 (0x1) (int)
  usb_device.configuration_value = 1 (0x1) (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string)
  info.linux.driver = 'usb' (string)
  info.bus = 'usb_device' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27ca' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_usbraw' (string)
  linux.device_file = '/dev/bus/usb/003/001' (string)
  linux.subsystem = 'usb_device' (string)
  linux.hotplug_type = 2 (0x2) (int)
  usbraw.device = '/dev/bus/usb/003/001' (string)
  info.product = 'USB Raw Device Access' (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev3.1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  usb_device.bus_number = 3 (0x3) (int)
  usb_device.can_wake_up = true (bool)
  usb_device.is_self_powered = false (bool)
  usb_device.version_bcd = 512 (0x200) (int)
  usb_device.speed_bcd = 336 (0x150) (int)
  usb_device.linux.device_number = 3 (0x3) (int)
  usb_device.num_ports = 0 (0x0) (int)
  usb_device.max_power = 100 (0x64) (int)
  usb_device.device_revision_bcd = 336 (0x150) (int)
  info.product = 'USB Wireless HID Receiver' (string)
  usb_device.product = 'USB Wireless HID Receiver' (string)
  info.vendor = 'Chicony' (string)
  usb_device.vendor = 'Chicony' (string)
  usb_device.product_id = 1056 (0x420) (int)
  usb_device.vendor_id = 1266 (0x4f2) (int)
  usb_device.device_protocol = 0 (0x0) (int)
  usb_device.device_subclass = 0 (0x0) (int)
  usb_device.device_class = 0 (0x0) (int)
  usb_device.num_interfaces = 3 (0x3) (int)
  usb_device.num_configurations = 1 (0x1) (int)
  usb_device.configuration_value = 1 (0x1) (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2' (string)
  info.linux.driver = 'usb' (string)
  info.bus = 'usb_device' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_usbraw' (string)
  linux.device_file = '/dev/bus/usb/003/003' (string)
  linux.subsystem = 'usb_device' (string)
  linux.hotplug_type = 2 (0x2) (int)
  usbraw.device = '/dev/bus/usb/003/003' (string)
  info.product = 'USB Raw Device Access' (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial' (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev3.3' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if2'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if2' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB HID Interface' (string)
  usb.interface.protocol = 2 (0x2) (int)
  usb.interface.subclass = 1 (0x1) (int)
  usb.interface.class = 3 (0x3) (int)
  usb.interface.number = 2 (0x2) (int)
  info.linux.driver = 'usbhid' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.2' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 3 (0x3) (int)
  usb.device_class = 0 (0x0) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.vendor_id = 1266 (0x4f2) (int)
  usb.product_id = 1056 (0x420) (int)
  usb.vendor = 'Chicony' (string)
  usb.product = 'USB HID Interface' (string)
  usb.device_revision_bcd = 336 (0x150) (int)
  usb.max_power = 100 (0x64) (int)
  usb.num_ports = 0 (0x0) (int)
  usb.linux.device_number = 3 (0x3) (int)
  usb.speed_bcd = 336 (0x150) (int)
  usb.version_bcd = 512 (0x200) (int)
  usb.is_self_powered = false (bool)
  usb.can_wake_up = true (bool)
  usb.bus_number = 3 (0x3) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.2' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.2' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if2_logicaldev_input'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if2_logicaldev_input' (string)
  input.product = 'Chicony USB Wireless HID Receiver' (string)
  info.product = 'Chicony USB Wireless HID Receiver' (string)
  linux.device_file = '/dev/input/event4' (string)
  linux.subsystem = 'input' (string)
  linux.hotplug_type = 2 (0x2) (int)
  input.device = '/dev/input/event4' (string)
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if2' (string)
  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if2' (string)
  linux.sysfs_path = '/sys/class/input/input4/event4' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if1'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if1' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB HID Interface' (string)
  usb.interface.protocol = 0 (0x0) (int)
  usb.interface.subclass = 0 (0x0) (int)
  usb.interface.class = 3 (0x3) (int)
  usb.interface.number = 1 (0x1) (int)
  info.linux.driver = 'usbhid' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 3 (0x3) (int)
  usb.device_class = 0 (0x0) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.vendor_id = 1266 (0x4f2) (int)
  usb.product_id = 1056 (0x420) (int)
  usb.vendor = 'Chicony' (string)
  usb.product = 'USB HID Interface' (string)
  usb.device_revision_bcd = 336 (0x150) (int)
  usb.max_power = 100 (0x64) (int)
  usb.num_ports = 0 (0x0) (int)
  usb.linux.device_number = 3 (0x3) (int)
  usb.speed_bcd = 336 (0x150) (int)
  usb.version_bcd = 512 (0x200) (int)
  usb.is_self_powered = false (bool)
  usb.can_wake_up = true (bool)
  usb.bus_number = 3 (0x3) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if1_logicaldev_input'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if1_logicaldev_input' (string)
  button.has_state = false (bool)
  button.type = '' (string)
  info.addons = {'hald-addon-keyboard'} (string list)
  input.product = 'Chicony USB Wireless HID Receiver' (string)
  info.product = 'Chicony USB Wireless HID Receiver' (string)
  linux.device_file = '/dev/input/event3' (string)
  linux.subsystem = 'input' (string)
  linux.hotplug_type = 2 (0x2) (int)
  input.device = '/dev/input/event3' (string)
  info.capabilities = {'input', 'input.joystick', 'input.keyboard', 'button'} (string list)
  info.category = 'input' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if1' (string)
  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if1' (string)
  linux.sysfs_path = '/sys/class/input/input3/event3' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if0' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB HID Interface' (string)
  usb.interface.protocol = 1 (0x1) (int)
  usb.interface.subclass = 1 (0x1) (int)
  usb.interface.class = 3 (0x3) (int)
  usb.interface.number = 0 (0x0) (int)
  info.linux.driver = 'usbhid' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 3 (0x3) (int)
  usb.device_class = 0 (0x0) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.vendor_id = 1266 (0x4f2) (int)
  usb.product_id = 1056 (0x420) (int)
  usb.vendor = 'Chicony' (string)
  usb.product = 'USB HID Interface' (string)
  usb.device_revision_bcd = 336 (0x150) (int)
  usb.max_power = 100 (0x64) (int)
  usb.num_ports = 0 (0x0) (int)
  usb.linux.device_number = 3 (0x3) (int)
  usb.speed_bcd = 336 (0x150) (int)
  usb.version_bcd = 512 (0x200) (int)
  usb.is_self_powered = false (bool)
  usb.can_wake_up = true (bool)
  usb.bus_number = 3 (0x3) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-2/3-2:1.0' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if0_logicaldev_input'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if0_logicaldev_input' (string)
  button.has_state = false (bool)
  button.type = '' (string)
  info.addons = {'hald-addon-keyboard'} (string list)
  input.product = 'Chicony USB Wireless HID Receiver' (string)
  info.product = 'Chicony USB Wireless HID Receiver' (string)
  linux.device_file = '/dev/input/event2' (string)
  linux.subsystem = 'input' (string)
  linux.hotplug_type = 2 (0x2) (int)
  input.device = '/dev/input/event2' (string)
  info.capabilities = {'input', 'input.keyboard', 'button'} (string list)
  info.category = 'input' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if0' (string)
  input.physical_device = '/org/freedesktop/Hal/devices/usb_device_4f2_420_noserial_if0' (string)
  linux.sysfs_path = '/sys/class/input/input2/event2' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2_if0' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB Hub Interface' (string)
  usb.interface.protocol = 0 (0x0) (int)
  usb.interface.subclass = 0 (0x0) (int)
  usb.interface.class = 9 (0x9) (int)
  usb.interface.number = 0 (0x0) (int)
  info.linux.driver = 'hub' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 1 (0x1) (int)
  usb.device_class = 9 (0x9) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.vendor_id = 0 (0x0) (int)
  usb.product_id = 0 (0x0) (int)
  usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb.product = 'USB Hub Interface' (string)
  usb.device_revision_bcd = 518 (0x206) (int)
  usb.max_power = 0 (0x0) (int)
  usb.num_ports = 2 (0x2) (int)
  usb.linux.device_number = 1 (0x1) (int)
  usb.serial = '0000:00:1d.2' (string)
  usb.speed_bcd = 4608 (0x1200) (int)
  usb.version_bcd = 272 (0x110) (int)
  usb.is_self_powered = true (bool)
  usb.can_wake_up = true (bool)
  usb.bus_number = 3 (0x3) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_2' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.2/usb3/3-0:1.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c9'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string)
  linux.subsystem = 'pci' (string)
  linux.hotplug_type = 1 (0x1) (int)
  pci.subsys_product = 'Unknown (0x7204)' (string)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.' (string)
  info.product = '82801G (ICH7 Family) USB UHCI #2' (string)
  pci.product = '82801G (ICH7 Family) USB UHCI #2' (string)
  info.vendor = 'Intel Corporation' (string)
  pci.vendor = 'Intel Corporation' (string)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 3 (0x3) (int)
  pci.device_class = 12 (0xc) (int)
  pci.subsys_vendor_id = 5218 (0x1462) (int)
  pci.subsys_product_id = 29188 (0x7204) (int)
  pci.vendor_id = 32902 (0x8086) (int)
  pci.product_id = 10185 (0x27c9) (int)
  info.linux.driver = 'uhci_hcd' (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.bus = 'pci' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  usb_device.bus_number = 2 (0x2) (int)
  usb_device.can_wake_up = true (bool)
  usb_device.is_self_powered = true (bool)
  usb_device.version_bcd = 272 (0x110) (int)
  usb_device.speed_bcd = 4608 (0x1200) (int)
  usb_device.serial = '0000:00:1d.1' (string)
  usb_device.linux.device_number = 1 (0x1) (int)
  usb_device.num_ports = 2 (0x2) (int)
  usb_device.max_power = 0 (0x0) (int)
  usb_device.device_revision_bcd = 518 (0x206) (int)
  info.product = 'UHCI Host Controller' (string)
  usb_device.product = 'UHCI Host Controller' (string)
  info.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb_device.product_id = 0 (0x0) (int)
  usb_device.vendor_id = 0 (0x0) (int)
  usb_device.device_protocol = 0 (0x0) (int)
  usb_device.device_subclass = 0 (0x0) (int)
  usb_device.device_class = 9 (0x9) (int)
  usb_device.num_interfaces = 1 (0x1) (int)
  usb_device.num_configurations = 1 (0x1) (int)
  usb_device.configuration_value = 1 (0x1) (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string)
  info.linux.driver = 'usb' (string)
  info.bus = 'usb_device' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c9' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_usbraw' (string)
  linux.device_file = '/dev/bus/usb/002/001' (string)
  linux.subsystem = 'usb_device' (string)
  linux.hotplug_type = 2 (0x2) (int)
  usbraw.device = '/dev/bus/usb/002/001' (string)
  info.product = 'USB Raw Device Access' (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev2.1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1_if0' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB Hub Interface' (string)
  usb.interface.protocol = 0 (0x0) (int)
  usb.interface.subclass = 0 (0x0) (int)
  usb.interface.class = 9 (0x9) (int)
  usb.interface.number = 0 (0x0) (int)
  info.linux.driver = 'hub' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 1 (0x1) (int)
  usb.device_class = 9 (0x9) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.vendor_id = 0 (0x0) (int)
  usb.product_id = 0 (0x0) (int)
  usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb.product = 'USB Hub Interface' (string)
  usb.device_revision_bcd = 518 (0x206) (int)
  usb.max_power = 0 (0x0) (int)
  usb.num_ports = 2 (0x2) (int)
  usb.linux.device_number = 1 (0x1) (int)
  usb.serial = '0000:00:1d.1' (string)
  usb.speed_bcd = 4608 (0x1200) (int)
  usb.version_bcd = 272 (0x110) (int)
  usb.is_self_powered = true (bool)
  usb.can_wake_up = true (bool)
  usb.bus_number = 2 (0x2) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_1' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-0:1.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27c8'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string)
  linux.subsystem = 'pci' (string)
  linux.hotplug_type = 1 (0x1) (int)
  pci.subsys_product = 'Unknown (0x7204)' (string)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.' (string)
  info.product = '82801G (ICH7 Family) USB UHCI #1' (string)
  pci.product = '82801G (ICH7 Family) USB UHCI #1' (string)
  info.vendor = 'Intel Corporation' (string)
  pci.vendor = 'Intel Corporation' (string)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 3 (0x3) (int)
  pci.device_class = 12 (0xc) (int)
  pci.subsys_vendor_id = 5218 (0x1462) (int)
  pci.subsys_product_id = 29188 (0x7204) (int)
  pci.vendor_id = 32902 (0x8086) (int)
  pci.product_id = 10184 (0x27c8) (int)
  info.linux.driver = 'uhci_hcd' (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.bus = 'pci' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  usb_device.bus_number = 1 (0x1) (int)
  usb_device.can_wake_up = true (bool)
  usb_device.is_self_powered = true (bool)
  usb_device.version_bcd = 272 (0x110) (int)
  usb_device.speed_bcd = 4608 (0x1200) (int)
  usb_device.serial = '0000:00:1d.0' (string)
  usb_device.linux.device_number = 1 (0x1) (int)
  usb_device.num_ports = 2 (0x2) (int)
  usb_device.max_power = 0 (0x0) (int)
  usb_device.device_revision_bcd = 518 (0x206) (int)
  info.product = 'UHCI Host Controller' (string)
  usb_device.product = 'UHCI Host Controller' (string)
  info.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb_device.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb_device.product_id = 0 (0x0) (int)
  usb_device.vendor_id = 0 (0x0) (int)
  usb_device.device_protocol = 0 (0x0) (int)
  usb_device.device_subclass = 0 (0x0) (int)
  usb_device.device_class = 9 (0x9) (int)
  usb_device.num_interfaces = 1 (0x1) (int)
  usb_device.num_configurations = 1 (0x1) (int)
  usb_device.configuration_value = 1 (0x1) (int)
  usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string)
  info.linux.driver = 'usb' (string)
  info.bus = 'usb_device' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27c8' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_usbraw' (string)
  linux.device_file = '/dev/bus/usb/001/001' (string)
  linux.subsystem = 'usb_device' (string)
  linux.hotplug_type = 2 (0x2) (int)
  usbraw.device = '/dev/bus/usb/001/001' (string)
  info.product = 'USB Raw Device Access' (string)
  info.capabilities = {'usbraw'} (string list)
  info.category = 'usbraw' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string)
  linux.sysfs_path = '/sys/class/usb_device/usbdev1.1' (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0'
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0_if0' (string)
  linux.subsystem = 'usb' (string)
  linux.hotplug_type = 1 (0x1) (int)
  info.product = 'USB Hub Interface' (string)
  usb.interface.protocol = 0 (0x0) (int)
  usb.interface.subclass = 0 (0x0) (int)
  usb.interface.class = 9 (0x9) (int)
  usb.interface.number = 0 (0x0) (int)
  info.linux.driver = 'hub' (string)
  usb.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string)
  usb.configuration_value = 1 (0x1) (int)
  usb.num_configurations = 1 (0x1) (int)
  usb.num_interfaces = 1 (0x1) (int)
  usb.device_class = 9 (0x9) (int)
  usb.device_subclass = 0 (0x0) (int)
  usb.device_protocol = 0 (0x0) (int)
  usb.vendor_id = 0 (0x0) (int)
  usb.product_id = 0 (0x0) (int)
  usb.vendor = 'Linux 2.6.20-16-generic uhci_hcd' (string)
  usb.product = 'USB Hub Interface' (string)
  usb.device_revision_bcd = 518 (0x206) (int)
  usb.max_power = 0 (0x0) (int)
  usb.num_ports = 2 (0x2) (int)
  usb.linux.device_number = 1 (0x1) (int)
  usb.serial = '0000:00:1d.0' (string)
  usb.speed_bcd = 4608 (0x1200) (int)
  usb.version_bcd = 272 (0x110) (int)
  usb.is_self_powered = true (bool)
  usb.can_wake_up = true (bool)
  usb.bus_number = 1 (0x1) (int)
  info.bus = 'usb' (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_0000_00_1d_0' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-0:1.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  linux.subsystem = 'pci' (string)
  linux.hotplug_type = 1 (0x1) (int)
  pci.subsys_product = 'Unknown (0x7204)' (string)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.' (string)
  info.product = '82801G (ICH7 Family) High Definition Audio Controller' (string)
  pci.product = '82801G (ICH7 Family) High Definition Audio Controller' (string)
  info.vendor = 'Intel Corporation' (string)
  pci.vendor = 'Intel Corporation' (string)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 3 (0x3) (int)
  pci.device_class = 4 (0x4) (int)
  pci.subsys_vendor_id = 5218 (0x1462) (int)
  pci.subsys_product_id = 29188 (0x7204) (int)
  pci.vendor_id = 32902 (0x8086) (int)
  pci.product_id = 10200 (0x27d8) (int)
  info.linux.driver = 'HDA Intel' (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.bus = 'pci' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:1b.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1b.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_2'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_2' (string)
  linux.device_file = '/dev/snd/pcmC0D2c' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Analog ALSA Capture Device' (string)
  alsa.type = 'capture' (string)
  alsa.device_id = 'ALC882 Analog' (string)
  alsa.pcm_class = 'generic' (string)
  alsa.card_id = 'Intel' (string)
  alsa.device = 2 (0x2) (int)
  alsa.card = 0 (0x0) (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  alsa.device_file = '/dev/snd/pcmC0D2c' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D2c' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_1' (string)
  linux.device_file = '/dev/snd/pcmC0D1p' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Digital ALSA Playback Device' (string)
  alsa.type = 'playback' (string)
  alsa.device_id = 'ALC882 Digital' (string)
  alsa.pcm_class = 'generic' (string)
  alsa.card_id = 'Intel' (string)
  alsa.device = 1 (0x1) (int)
  alsa.card = 0 (0x0) (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  alsa.device_file = '/dev/snd/pcmC0D1p' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D1p' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_1' (string)
  linux.device_file = '/dev/snd/pcmC0D1c' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Digital ALSA Capture Device' (string)
  alsa.type = 'capture' (string)
  alsa.device_id = 'ALC882 Digital' (string)
  alsa.pcm_class = 'generic' (string)
  alsa.card_id = 'Intel' (string)
  alsa.device = 1 (0x1) (int)
  alsa.card = 0 (0x0) (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  alsa.device_file = '/dev/snd/pcmC0D1c' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D1c' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_playback_0' (string)
  linux.device_file = '/dev/snd/pcmC0D0p' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Analog ALSA Playback Device' (string)
  alsa.type = 'playback' (string)
  alsa.device_id = 'ALC882 Analog' (string)
  alsa.pcm_class = 'generic' (string)
  alsa.card_id = 'Intel' (string)
  alsa.device = 0 (0x0) (int)
  alsa.card = 0 (0x0) (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  alsa.device_file = '/dev/snd/pcmC0D0p' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0p' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_capture_0' (string)
  linux.device_file = '/dev/snd/pcmC0D0c' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Analog ALSA Capture Device' (string)
  alsa.type = 'capture' (string)
  alsa.device_id = 'ALC882 Analog' (string)
  alsa.pcm_class = 'generic' (string)
  alsa.card_id = 'Intel' (string)
  alsa.device = 0 (0x0) (int)
  alsa.card = 0 (0x0) (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  alsa.device_file = '/dev/snd/pcmC0D0c' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  linux.sysfs_path = '/sys/class/sound/pcmC0D0c' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_mixer__1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_mixer__1' (string)
  linux.device_file = '/dev/mixer' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Analog OSS Control Device' (string)
  oss.type = 'mixer' (string)
  oss.device_id = 'ALC882 Analog' (string)
  oss.card_id = 'Intel' (string)
  oss.card = 0 (0x0) (int)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  oss.device_file = '/dev/mixer' (string)
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  linux.sysfs_path = '/sys/class/sound/mixer' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0_0' (string)
  linux.device_file = '/dev/dsp' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Analog OSS PCM Device' (string)
  oss.type = 'pcm' (string)
  oss.device = 0 (0x0) (int)
  oss.device_id = 'ALC882 Analog' (string)
  oss.card_id = 'Intel' (string)
  oss.card = 0 (0x0) (int)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  oss.device_file = '/dev/dsp' (string)
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  linux.sysfs_path = '/sys/class/sound/dsp' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_control__1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_alsa_control__1' (string)
  linux.device_file = '/dev/snd/controlC0' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'Intel ALSA Control Device' (string)
  alsa.card_id = 'Intel' (string)
  alsa.type = 'control' (string)
  alsa.card = 0 (0x0) (int)
  alsa.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  alsa.device_file = '/dev/snd/controlC0' (string)
  info.capabilities = {'alsa'} (string list)
  info.category = 'alsa' (string)
  linux.sysfs_path = '/sys/class/sound/controlC0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_0' (string)
  linux.device_file = '/dev/audio' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Analog OSS PCM Device' (string)
  oss.type = 'pcm' (string)
  oss.device = 0 (0x0) (int)
  oss.device_id = 'ALC882 Analog' (string)
  oss.card_id = 'Intel' (string)
  oss.card = 0 (0x0) (int)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  oss.device_file = '/dev/audio' (string)
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  linux.sysfs_path = '/sys/class/sound/audio' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_1'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_27d8_oss_pcm_1' (string)
  linux.device_file = '/dev/adsp' (string)
  linux.subsystem = 'sound' (string)
  linux.hotplug_type = 2 (0x2) (int)
  info.product = 'ALC882 Analog OSS PCM Device' (string)
  oss.type = 'pcm' (string)
  oss.device = 1 (0x1) (int)
  oss.device_id = 'ALC882 Analog' (string)
  oss.card_id = 'Intel' (string)
  oss.card = 0 (0x0) (int)
  oss.physical_device = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_27d8' (string)
  oss.device_file = '/dev/adsp' (string)
  info.capabilities = {'oss'} (string list)
  info.category = 'oss' (string)
  linux.sysfs_path = '/sys/class/sound/adsp' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2771'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2771' (string)
  linux.subsystem = 'pci' (string)
  linux.hotplug_type = 1 (0x1) (int)
  pci.subsys_product = 'Unknown (0x0000)' (string)
  pci.subsys_vendor = 'Unknown (0x0000)' (string)
  info.product = '82945G/GZ/P/PL PCI Express Root Port' (string)
  pci.product = '82945G/GZ/P/PL PCI Express Root Port' (string)
  info.vendor = 'Intel Corporation' (string)
  pci.vendor = 'Intel Corporation' (string)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 4 (0x4) (int)
  pci.device_class = 6 (0x6) (int)
  pci.subsys_vendor_id = 0 (0x0) (int)
  pci.subsys_product_id = 0 (0x0) (int)
  pci.vendor_id = 32902 (0x8086) (int)
  pci.product_id = 10097 (0x2771) (int)
  info.linux.driver = 'pcieport-driver' (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.bus = 'pci' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_10de_147'
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_147' (string)
  linux.subsystem = 'pci' (string)
  linux.hotplug_type = 1 (0x1) (int)
  pci.subsys_product = 'Unknown (0x0350)' (string)
  pci.subsys_vendor = 'Micro-Star International Co., Ltd.' (string)
  info.product = 'Unknown (0x0147)' (string)
  pci.product = 'Unknown (0x0147)' (string)
  info.vendor = 'nVidia Corporation' (string)
  pci.vendor = 'nVidia Corporation' (string)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.device_class = 3 (0x3) (int)
  pci.subsys_vendor_id = 5218 (0x1462) (int)
  pci.subsys_product_id = 848 (0x350) (int)
  pci.vendor_id = 4318 (0x10de) (int)
  pci.product_id = 327 (0x147) (int)
  info.linux.driver = 'nvidia' (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2771' (string)
  info.bus = 'pci' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0' (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2770'
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2770' (string)
  linux.subsystem = 'pci' (string)
  linux.hotplug_type = 1 (0x1) (int)
  pci.subsys_product = 'Unknown (0x2770)' (string)
  pci.subsys_vendor = 'Intel Corporation' (string)
  info.product = '82945G/GZ/P/PL Memory Controller Hub' (string)
  pci.product = '82945G/GZ/P/PL Memory Controller Hub' (string)
  info.vendor = 'Intel Corporation' (string)
  pci.vendor = 'Intel Corporation' (string)
  pci.device_protocol = 0 (0x0) (int)
  pci.device_subclass = 0 (0x0) (int)
  pci.device_class = 6 (0x6) (int)
  pci.subsys_vendor_id = 32902 (0x8086) (int)
  pci.subsys_product_id = 10096 (0x2770) (int)
  pci.vendor_id = 32902 (0x8086) (int)
  pci.product_id = 10096 (0x2770) (int)
  info.linux.driver = 'agpgart-intel' (string)
  pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)
  info.parent = '/org/freedesktop/Hal/devices/computer' (string)
  info.bus = 'pci' (string)
  linux.sysfs_path_device = '/sys/devices/pci0000:00/0000:00:00.0' (string)
  linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:00.0' (string)

Dumped 167 device(s) from the Global Device List.
------------------------------------------------

Revision history for this message
Florent Mertens (givre) said : 		#5

> I am not sure but I think terminal truncated the first part; hope the info you look for is in this.
> If I need to use parameters please specify (I am a Linux newby).

Unfortunately no.
But if it worked correctly this time, it seams to not be a problem any more, isn't it ?

Revision history for this message
jUbuntu (jdhaasnoot) said : 		#6

Hi,

I was working with my USB stick when i read your post; guess what, I inserted the stick. Sorry.

No, my HD is still not visible.

I disconnected the HD and connected and received an err message:
CAN NOT MOUNT VOLUME
Unable to mount the volume '500GB USB-DISC'.
The details:
vol is schedulded for chekc. Please boot into windows twice
or use the force mount option.
and then some commands for the command line are given.

Since my Win crashed it is in a booting loop without getting further; guess I have to try the force mount commands in a terminal?

regards, jd

Revision history for this message
jUbuntu (jdhaasnoot) said : 		#7

Hi,

I tried the following as adviced by the error dialog box of ntfs-3g:
as root
root@jPD830:~# mount -t ntfs-3g/dev/sdb1/media/500GB USB-DISC -o force

Usage: mount -V : print version
       mount -h : print this help
       mount : list mounted filesystems
       mount -l : idem, including volume labels
So far the informational part. Next the mounting.
The command is `mount [-t fstype] something somewhere'.
Details found in /etc/fstab may be omitted.
       mount -a [-t|-O] ... : mount all stuff from /etc/fstab
       mount device : mount device at the known place
       mount directory : mount known device here
       mount -t type dev dir : ordinary mount command
Note that one does not really mount a device, one mounts
a filesystem (of the given type) found on the device.
One can also mount an already visible directory tree elsewhere:
       mount --bind olddir newdir
or move a subtree:
       mount --move olddir newdir
A device can be given by name, say /dev/hda1 or /dev/cdrom,
or by label, using -L label or by uuid, using -U uuid .
Other options: [-nfFrsvw] [-o options] [-p passwdfd].
For many more details, say man 8 mount .
root@jPD830:~#

Then I rebooted, powered off both PC and HD => no HD.

The err dialog advised as an alternative:
" add the option to the relevant row in the /etc/fstab file:
/dev/sdb1/media/500GB USB-DISC ntfs-3g defaults,force 0 0"

Since I am not sure about the content of fstab I did NOT do this.

Here the content of my current fstab:
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>

proc /proc proc defaults 0 0
# Entry for /dev/sda3 :
UUID=8297c154-c301-447a-b70a-4211235b1d55 / ext3 defaults,errors=remount-ro 0 1
# Entry for /dev/sda1 :
UUID=9A404E91404E7453 /media/sda1 ntfs-3g defaults,locale=en_US.UTF-8 0 1
# Entry for /dev/sda5 :
UUID=5E2C19362C190AA3 /media/sda5 ntfs-3g defaults,locale=en_US.UTF-8 0 1
# Entry for /dev/sda6 :
UUID=7C1F-EA41 /media/sda6 vfat defaults,utf8,umask=007,gid=46 0 1
# Entry for /dev/sda7 :
UUID=aa980d57-61e0-4fef-820e-477fbaa20777 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/scd1 /media/cdrom1 udf,iso9660 user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
/tmp/app/1/image /tmp/app/1 cramfs,iso9660 user,noauto,ro,loop,exec 0 0
/tmp/app/2/image /tmp/app/2 cramfs,iso9660 user,noauto,ro,loop,exec 0 0
/tmp/app/3/image /tmp/app/3 cramfs,iso9660 user,noauto,ro,loop,exec 0 0
/tmp/app/4/image /tmp/app/4 cramfs,iso9660 user,noauto,ro,loop,exec 0 0
/tmp/app/5/image /tmp/app/5 cramfs,iso9660 user,noauto,ro,loop,exec 0 0
/tmp/app/6/image /tmp/app/6 cramfs,iso9660 user,noauto,ro,loop,exec 0 0
/tmp/app/7/image /tmp/app/7 cramfs,iso9660 user,noauto,ro,loop,exec 0 0

Please advice
regards jd

Revision history for this message
Peter L Jones (peter-drealm) said : 		#8

You need to take more care with your spaces.
> mount -t ntfs-3g/dev/sdb1/media/500GB USB-DISC -o force
 There should be a space before /dev and another before /media. I would initially try without the "-o force". Then with "-o ro,force". If the disk got corrupted when Windows crashed, you'll need to run chkdsk in Windows to fix it up before using it read/write under Linux for safety's sake.

Revision history for this message
Peter L Jones (peter-drealm) said : 		#9

And there should be a "\" after 500GB, I guess, too!

Can you help with this problem?

Provide an answer of your own, or ask jUbuntu for more information if necessary.

To post a message you must log in.