VBF+MET+Photon MadGraph generation
Hello,
I am trying to update an old JO that can be found here: https:/
The updated JO and log file can be found here: https:/
Could you advise please how to fix the errors reported in the log file?
Thanks
Best,
Diallo.
Question information
- Language:
- English Edit question
- Status:
- Answered
- Assignee:
- No assignee Edit question
- Last query:
- Last reply:
|
Revision history for this message
|
#1 |
I also added ME5_debug file here: https:/
|
Revision history for this message
|
#2 |
Hi there,
Just to offer a bit more back-story: this is a job in MG5_aMC 3.4.2. The process is loop-induced:
generate p p > h a j j [QCD]
The error message here is a timeout:
File "/cvmfs/
subprocess.
File "/cvmfs/
raise TimeOutError
madgraph.
which looks like LHAPDF should just be given a bit more time before declaring it dead, because for some reason on some systems it's taking a while for that lhapdf_config command to return. The full ME5_debug file is pasted below for convenience.
Cheers,
Zach
#******
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 3.4.2 2023-01-20 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https:/
#* and *
#* http://
#* *
#******
#* *
#* Command File for aMCatNLO *
#* *
#* run as ./bin/aMCatNLO.py filename *
#* *
#******
launch --name=run_01
Traceback (most recent call last):
File "/cvmfs/
return self.onecmd_
File "/cvmfs/
return func(arg, **opt)
File "/afs/cern.
mode = self.ask_
File "/afs/cern.
self.
File "/cvmfs/
self.
File "/cvmfs/
out = ask(question, '0', possible_answer, timeout=
File "/cvmfs/
value = Cmd.timed_
File "/cvmfs/
result = fct(question)
File "/cvmfs/
return self.cmdloop()
File "/cvmfs/
super(
File "/cvmfs/
stop = self.postcmd(stop, line)
File "/cvmfs/
self.
File "/cvmfs/
self.
File "/cvmfs/
pdfsetsdir = mecmd.get_
File "/cvmfs/
lhapdf_version = self.get_
File "/cvmfs/
self.
File "/cvmfs/
subprocess.
File "/cvmfs/
raise TimeOutError
madgraph.
Value of current Options:
exrootana
cluster_
automatic_
notificat
output_
#******
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 3.4.2 2023-01-20 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https:/
#* *
#******
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#******
set group_subprocesses Auto
set ignore_
set low_mem_
set complex_mass_scheme False
set include_
set gauge unitary
set loop_optimized_
set loop_color_flows False
set max_npoint_
set default_
set max_t_for_channel 99
set zerowidth_tchannel True
set nlo_mixed_expansion True
import model loop_qcd_qed_sm_Gmu
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
define p = 21 2 4 1 3 -2 -4 -1 -3 5 -5 22 # pass to 5 flavors
define j = p
define p = g u c d s u~ c~ d~ s~ b b~
define j = g u c d s u~ c~ d~ s~ b b~
set nlo_mixed_expansion False
generate p p > h a j j [QCD]
output -f -nojpeg
#######
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
#######
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
#######
#######
## INFORMATION FOR MASS
#######
Block mass
6 1.733000e+02 # MT
23 9.118800e+01 # MZ
24 8.041900e+01 # MW
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000e+00 # d : 0.0
2 0.000000e+00 # u : 0.0
3 0.000000e+00 # s : 0.0
4 0.000000e+00 # c : 0.0
5 0.000000e+00 # b : 0.0
11 0.000000e+00 # e- : 0.0
12 0.000000e+00 # ve : 0.0
13 0.000000e+00 # mu- : 0.0
14 0.000000e+00 # vm : 0.0
15 0.000000e+00 # ta- : 0.0
16 0.000000e+00 # vt : 0.0
21 0.000000e+00 # g : 0.0
22 0.000000e+00 # a : 0.0
9000002 9.118800e+01 # ghz : MZ
9000003 8.041900e+01 # ghwp : MW
9000004 8.041900e+01 # ghwm : MW
250 9.118800e+01 # g0 : MZ
251 8.041900e+01 # g+ : MW
#######
## INFORMATION FOR SMINPUTS
#######
Block sminputs
2 1.166390e-05 # Gf
3 1.180000e-01 # aS (Note that Parameter not used if you use a PDF set)
#######
## INFORMATION FOR YUKAWA
#######
Block yukawa
6 1.733000e+02 # ymt
#######
## INFORMATION FOR DECAY
#######
DECAY 6 1.377580e+00 # WT
DECAY 23 2.498770e+00 # WZ
DECAY 24 2.092910e+00 # WW
DECAY 25 4.074680e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000e+00 # d : 0.0
DECAY 2 0.000000e+00 # u : 0.0
DECAY 3 0.000000e+00 # s : 0.0
DECAY 4 0.000000e+00 # c : 0.0
DECAY 5 0.000000e+00 # b : 0.0
DECAY 11 0.000000e+00 # e- : 0.0
DECAY 12 0.000000e+00 # ve : 0.0
DECAY 13 0.000000e+00 # mu- : 0.0
DECAY 14 0.000000e+00 # vm : 0.0
DECAY 15 0.000000e+00 # ta- : 0.0
DECAY 16 0.000000e+00 # vt : 0.0
DECAY 21 0.000000e+00 # g : 0.0
DECAY 22 0.000000e+00 # a : 0.0
DECAY 250 2.498770e+00 # g0 : WZ
DECAY 251 2.092910e+00 # g+ : WW
#======
# QUANTUM NUMBERS OF NEW STATE(S) (NON SM PDG CODE)
#======
Block QNUMBERS 9000001 # gha
1 0 # 3 times electric charge
2 1 # number of spin states (2S+1)
3 1 # colour rep (1: singlet, 3: triplet, 8: octet)
4 1 # Particle/
Block QNUMBERS 9000002 # ghz
1 0 # 3 times electric charge
2 1 # number of spin states (2S+1)
3 1 # colour rep (1: singlet, 3: triplet, 8: octet)
4 1 # Particle/
Block QNUMBERS 9000003 # ghwp
1 3 # 3 times electric charge
2 1 # number of spin states (2S+1)
3 1 # colour rep (1: singlet, 3: triplet, 8: octet)
4 1 # Particle/
Block QNUMBERS 9000004 # ghwm
1 -3 # 3 times electric charge
2 1 # number of spin states (2S+1)
3 1 # colour rep (1: singlet, 3: triplet, 8: octet)
4 1 # Particle/
Block QNUMBERS 9000005 # ghg
1 0 # 3 times electric charge
2 1 # number of spin states (2S+1)
3 8 # colour rep (1: singlet, 3: triplet, 8: octet)
4 1 # Particle/
Block QNUMBERS 250 # g0
1 0 # 3 times electric charge
2 1 # number of spin states (2S+1)
3 1 # colour rep (1: singlet, 3: triplet, 8: octet)
4 0 # Particle/
Block QNUMBERS 251 # g+
1 3 # 3 times electric charge
2 1 # number of spin states (2S+1)
3 1 # colour rep (1: singlet, 3: triplet, 8: octet)
4 1 # Particle/
#******
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
# *
# Some of the values of variables can be list. These can either be *
# comma or space separated. *
# *
# To display additional parameter, you can use the command: *
# update to_full *
#******
#
#******
# Running parameters
#******
#
#******
# Tag name for the run (one word) *
#******
tag_1 = run_tag ! name of the run
#******
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#******
10000 = nevents ! Number of unweighted events requested
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#******
# Output format
#******
-1.0 = time_of_flight ! threshold (in mm) below which the invariant livetime is not written (-1 means not written)
average = event_norm ! average/sum/bias. Normalization of the weight in the LHEF
#******
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#******
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#******
# Random number seed *
#******
12345 = iseed ! rnd seed (0=assigned automatically=
#******
# Collider type and energy *
#******
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500.0 = ebeam1 ! beam 1 energy in GeV
6500.0 = ebeam2 ! beam 2 energy in GeV
#******
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#******
'lhapdf' = pdlabel ! PDF set
260000 = lhaid ! If pdlabel=lhapdf, this is the lhapdf number. Only
! numbers for central PDF sets are allowed. Can be a list;
! PDF sets beyond the first are included via reweighting.
#******
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#******
'PYTHIA8' = parton_shower
1.0 = shower_scale_factor ! multiply default shower starting
! scale by this factor
#******
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses divided by two of all final state particles *
# and partons. This can be changed in SubProcesses/
# dynamical_
#******
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
91.118 = muR_ref_fixed ! fixed ren reference scale
91.118 = muF_ref_fixed ! fixed fact reference scale
10 = dynamical_
! dynamical choices. Can be a list; scale choices beyond the
! first are included via reweighting
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF_over_ref ! ratio of current muF over reference muF
#******
# Reweight variables for scale dependence and PDF uncertainty *
#******
1.0, 2.0, 0.5 = rw_rscale ! muR factors to be included by reweighting
1.0, 2.0, 0.5 = rw_fscale ! muF factors to be included by reweighting
.true. = reweight_scale ! Reweight to get scale variation using the
! rw_rscale and rw_fscale factors. Should be a list of
! booleans of equal length to dynamical_
! specify for which choice to include scale dependence.
.true. = reweight_PDF ! Reweight to get PDF uncertainty. Should be a
! list booleans of equal length to lhaid to specify for
! which PDF set to include the uncertainties.
#******
# Store reweight information in the LHE file for off-line model- *
# parameter reweighting at NLO+PS accuracy *
#******
.true. = store_rwgt_info ! Store info for reweighting in LHE file
#******
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#******
0 = ickkw
#******
#
#******
# BW cutoff (M+/-bwcutoff*
# written in the LHE event file *
#******
15 = bwcutoff
#******
# Cuts on the jets. Jet clustering is performed by FastJet. *
# - If gamma_is_j, photons are also clustered with jets. *
# Otherwise, they will be treated as tagged particles and photon *
# isolation will be applied. Note that photons in the real emission *
# will always be clustered with QCD partons. *
# - When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# - More specific cuts can be specified in SubProcesses/cuts.f *
#******
-1 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.4 = jetradius ! The radius parameter for the jet algorithm
15.0 = ptj ! Min jet transverse momentum
-1 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut)
False = gamma_is_j! Wether to cluster photons as jets or not
#******
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# More specific cuts can be specified in SubProcesses/cuts.f *
#******
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no cut)
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pairs
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pairs
#******
# Fermion-photon recombination parameters *
# If Rphreco=0, no recombination is performed *
#******
0.1 = Rphreco ! Minimum fermion-photon distance for recombination
-1.0 = etaphreco ! Maximum abs(pseudo-rap) for photons to be recombined (a value .lt.0 means no cut)
False = lepphreco ! Recombine photons and leptons together
False = quarkphreco ! Recombine photons and quarks together
#******
# Photon-isolation cuts, according to hep-ph/9801442 *
# Not applied if gamma_is_j *
# When ptgmin=0, all the other parameters are ignored *
# More specific cuts can be specified in SubProcesses/cuts.f *
#******
10.0 = ptgmin ! Min photon transverse momentum
3.0 = etagamma ! Max photon abs(pseudo-rap)
0.1 = R0gamma ! Radius of isolation code
2 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
0.1 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/9801442
True = isoEM ! isolate photons from EM energy (photons and leptons)
#******
# Cuts associated to MASSIVE particles identified by their PDG codes. *
# All cuts are applied to both particles and anti-particles, so use *
# POSITIVE PDG CODES only. Example of the syntax is {6 : 100} or *
# {6:100, 25:200} for multiple particles *
#******
{} = pt_min_pdg ! Min pT for a massive particle
{} = pt_max_pdg ! Max pT for a massive particle
{} = mxx_min_pdg ! inv. mass for any pair of (anti)particles
#******
# Use PineAPPL to generate PDF-independent fast-interpolation grid *
# (https:/
#******
False = pineappl ! PineAPPL switch
#******
3.0 = lhe_version
5 = maxjetflavor
|
Revision history for this message
|
#3 |
Looks like your version of lhapdf is too slow to provide back information like version number/... and make the code to crash.
Might be a temporary problem of your cluster (even if we can probably secure more that part of the code) which has a problem on the filesystem (or something like that)
So my advice is to just retry.
Cheers,
Olivier
> On 8 Sep 2023, at 11:30, Diallo BOYE <email address hidden> wrote:
>
> New question #707873 on MadGraph5_aMC@NLO:
> https:/
>
> Hello,
>
> I am trying to update an old JO that can be found here: https:/
> The updated JO and log file can be found here: https:/
>
> Could you advise please how to fix the errors reported in the log file?
> Thanks
>
> Best,
>
> Diallo.
>
>
> --
> You received this question notification because you are an answer
> contact for MadGraph5_aMC@NLO.
|
Revision history for this message
|
#4 |
Hi Zach,
I can actually provide a patch obviously as well (I will secure this part anyway)
|
Revision history for this message
|
#5 |
Thanks Olivier! It's a pretty new LHAPDF version, and I suspect it's just a high cvmfs load. It'd be great if this could be given a little extra time before timing out.
Best,
Zach
|
Revision history for this message
|
#6 |
Here is the patch:
https:/
Olivier
Can you help with this problem?
Provide an answer of your own, or ask Diallo BOYE for more information if necessary.
