Question #64793 “print que says printer may not be connected aft...” : Questions : HPLIP

Revision history for this message

Aaron Albright (albrigha-deactivatedaccount) said on 2009-03-20:

#1

Please run hp-check -t and post the output.

Thanks.

Aaron

Revision history for this message

chase (fibo112358) said on 2009-03-20:

#2

Here is the output:

[chase@chase-fedora ~]$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.9.2)
Dependency/Version Check Utility ver. 14.1

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux chase-fedora 2.6.27.19-170.2.35.fc10.i686 #1 SMP Mon Feb 23 13:21:22 EST 2009 i686 i686 i386 GNU/Linux

Distribution:
fedora 10

HPOJ running?
No, HPOJ is not running (OK).

Checking Python version...
OK, version 2.5.2 installed

Checking PyQt 4.x version...
OK, version 4.4.4 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.3.9
warning: /etc/cups/cupsd.conf file not found or not accessible.

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS DDK - CUPS driver development kit...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: ppdev - Parallel port support kernel module....
OK, found.

Checking for dependency: PyQt 4- Qt interface for Python (for Qt version 4.x)...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python ctypes - A foreign function library for Python...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.9.2 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.9.2

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/cups/model/HP
ppdbase=/usr/share/cups/model
doc=/usr/share/doc/hplip-3.9.2
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp/

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
foomatic-drv-install=yes
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
internal-tag=3.9.2.49
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes

Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name = HP_LaserJet_P1006
printer =
device_uri = hp:/usb/HP_LaserJet_P1006?serial=AC1BYQF

[commands]
scan = /usr/bin/xsane -V %SANE_URI%

[installation]
version = 3.9.2.49
date_time = 03/20/09 16:25:58

[settings]
systray_visible = 0

[refresh]
rate = 30
enable = false
type = 1

[polling]
enable = false
device_list =
interval = 5

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

No devices found.

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

HP_LaserJet_P1006
-----------------
Type: Printer
Installed in HPLIP?: Yes, using the hp: CUPS backend.
Device URI: hp:/usb/HP_LaserJet_P1006?serial=AC1BYQF
PPD: /etc/cups/ppd/HP_LaserJet_P1006.ppd
PPD Description: HP LaserJet p1006 hpijs, hpijs 3.9.2
Printer status: printer HP_LaserJet_P1006 now printing HP_LaserJet_P1006-0. enabled since Fri 20 Mar 2009 12:25:11 PM MST

HP Linux Imaging and Printing System (ver. 3.9.2)
System Tray Status Service ver. 2.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Required plug-in status: Installed
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_P1006?serial=AC1BYQF
error: Device not found

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

-----------
| SUMMARY |
-----------

error: 1 error or warning.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.
[chase@chase-fedora ~]$

Thanks Aaron

Here is the output:

[chase@chase-fedora ~]$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.9.2)
Dependency/Version Check Utility ver. 14.1

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.                                    
2. Run-time check mode (-r or --run): Use this mode to determine if a distro    
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball   
has the proper dependencies installed to successfully run.                      
3. Both compile- and run-time check mode (-b or --both) (Default): This mode    
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...
 
---------------
| SYSTEM INFO |
---------------