wireless setup for Deskjet 3050

Asked by michael coady

Using Ubuntu 11:10
Wired connection works fine. Network connection will not.
Have read previous inquiries but no solution here.
Here is readout from $ hp-check -t

mrc@mrc-Inspiron-1720:~$ hp-check -t

HP Linux Imaging and Printing System (ver. 3.11.1)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux mrc-Inspiron-1720 2.6.38-10-generic #46-Ubuntu SMP Tue Jun 28 15:05:41 UTC 2011 i686 i686 i386 GNU/Linux

Distribution:
ubuntu 11.04

Checking Python version...
OK, version 2.7.1 installed

Checking PyQt 4.x version...
OK, version 4.8.3 installed.

Checking for CUPS...
Status: scheduler is running
Version: 1.4.6
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.1

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.11.1 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.11.1

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.11.1.19
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.

[plugin]
installed=0
eula=0

Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 11-07-16 11:06:00
version = 3.11.1.19

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  -------------------------------- ---------------------------
  hp:/usb/Deskjet_3050_J610_series HP Deskjet 3050 J610 series
  ?serial=CN0CH3B5WF05HX
  hp:/usb/PSC_1600_series?serial=M HP PSC 1600 series
  Y61OC126704GH

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Deskjet-3050-J610-series
------------------------
Type: Printer
Device URI: hp:/usb/Deskjet_3050_J610_series?serial=CN0CH3B5WF05HX
PPD: /etc/cups/ppd/Deskjet-3050-J610-series.ppd
PPD Description: HP Deskjet 3050 j610 Series, hpcups 3.11.1
Printer status: printer Deskjet-3050-J610-series is idle. enabled since Fri 15 Jul 2011 07:01:59 PM EDT
Communication status: Good

PSC-1600-series
---------------
Type: Printer
Device URI: hp:/usb/PSC_1600_series?serial=MY61OC126704GH
PPD: /etc/cups/ppd/PSC-1600-series.ppd
PPD Description: HP PSC 1600 Series, hpcups 3.11.1
Printer status: printer PSC-1600-series is idle. enabled since Fri 15 Jul 2011 07:15:47 PM EDT
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...
device `hpaio:/usb/Deskjet_3050_J610_series?serial=CN0CH3B5WF05HX' is a Hewlett-Packard Deskjet_3050_J610_series all-in-one
device `hpaio:/usb/PSC_1600_series?serial=MY61OC126704GH' is a Hewlett-Packard PSC_1600_series all-in-one

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x9311 at 002:011:
    Device URI: hp:/usb/Deskjet_3050_J610_series?serial=CN0CH3B5WF05HX
    Device node: /dev/bus/usb/002/011
    Mode: 0664

HP Device 0x4811 at 002:010:
    Device URI: hp:/usb/PSC_1600_series?serial=MY61OC126704GH
    Device node: /dev/bus/usb/002/010
    Mode: 0664

---------------
| USER GROUPS |
---------------

mrc adm dialout cdrom plugdev lpadmin admin sambashare

error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.

-----------
| SUMMARY |
-----------

error: 7 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

Any suggestions will be much appreciated.

Michael Coady

Question information

Language:
English Edit question
Status:
Solved
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Solved by:
Srikanth
Solved:
Last query:
Last reply:
Revision history for this message
michael coady (mrccoady) said :
#1

Don't ask me how but I managed to solve my problem of getting the wireless
to work on Ubuntu 11.10 I tried so many strategies that I cannot be sure
which one made the difference. Perhaps setting up a WPA2-PSK on the router
helped. The router then allowed me to set up a connection with the wireless
printer.

Michael Coady

On Sat, Jul 16, 2011 at 11:11 AM, michael coady <
<email address hidden>> wrote:

> New question #165027 on HPLIP:
> https://answers.launchpad.net/hplip/+question/165027
>
> Using Ubuntu 11:10
> Wired connection works fine. Network connection will not.
> Have read previous inquiries but no solution here.
> Here is readout from $ hp-check -t
>
>
> mrc@mrc-Inspiron-1720:~$ hp-check -t
>
> HP Linux Imaging and Printing System (ver. 3.11.1)
> Dependency/Version Check Utility ver. 14.3
>
> Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
> This software comes with ABSOLUTELY NO WARRANTY.
> This is free software, and you are welcome to distribute it
> under certain conditions. See COPYING file for more details.
>
> Note: hp-check can be run in three modes:
> 1. Compile-time check mode (-c or --compile): Use this mode before
> compiling the
> HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
> dependencies
> are installed to successfully compile HPLIP.
> 2. Run-time check mode (-r or --run): Use this mode to determine if a
> distro
> supplied package (.deb, .rpm, etc) or an already built HPLIP supplied
> tarball
> has the proper dependencies installed to successfully run.
> 3. Both compile- and run-time check mode (-b or --both) (Default): This
> mode
> will check both of the above cases (both compile- and run-time
> dependencies).
>
> Saving output in log file: hp-check.log
>
> Initializing. Please wait...
>
> ---------------
> | SYSTEM INFO |
> ---------------
>
> Basic system information:
> Linux mrc-Inspiron-1720 2.6.38-10-generic #46-Ubuntu SMP Tue Jun 28
> 15:05:41 UTC 2011 i686 i686 i386 GNU/Linux
>
> Distribution:
> ubuntu 11.04
>
> Checking Python version...
> OK, version 2.7.1 installed
>
> Checking PyQt 4.x version...
> OK, version 4.8.3 installed.
>
> Checking for CUPS...
> Status: scheduler is running
> Version: 1.4.6
> error_log is set to level: warn
>
> Checking for dbus/python-dbus...
> dbus daemon is running.
> python-dbus version: 0.83.1
>
>
> ------------------------------------
> | COMPILE AND RUNTIME DEPENDENCIES |
> ------------------------------------
>
> note: To check for compile-time only dependencies, re-run hp-check with the
> -c parameter (ie, hp-check -c).
> note: To check for run-time only dependencies, re-run hp-check with the -r
> parameter (ie, hp-check -r).
>
> Checking for dependency: CUPS - Common Unix Printing System...
> OK, found.
>
> Checking for dependency: CUPS devel- Common Unix Printing System
> development files...
> OK, found.
>
> Checking for dependency: CUPS image - CUPS image development files...
> OK, found.
>
> Checking for dependency: DBus - Message bus system...
> error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
>
> Checking for dependency: gcc - GNU Project C and C++ Compiler...
> OK, found.
>
> Checking for dependency: GhostScript - PostScript and PDF language
> interpreter and previewer...
> OK, found.
>
> Checking for dependency: libcrypto - OpenSSL cryptographic library...
> OK, found.
>
> Checking for dependency: libjpeg - JPEG library...
> OK, found.
>
> Checking for dependency: libnetsnmp-devel - SNMP networking library
> development files...
> error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
>
> Checking for dependency: libpthread - POSIX threads library...
> OK, found.
>
> Checking for dependency: libtool - Library building support services...
> error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please
> make sure that this dependency is installed before installing or running
> HPLIP.
>
> Checking for dependency: libusb - USB library...
> error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this
> dependency is installed before installing or running HPLIP.
>
> Checking for dependency: make - GNU make utility to maintain groups of
> programs...
> OK, found.
>
> Checking for dependency: PIL - Python Imaging Library (required for
> commandline scanning with hp-scan)...
> OK, found.
>
> Checking for dependency: PolicyKit - Administrative policy framework...
> OK, found.
>
> Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
> OK, found.
>
> Checking for dependency: Python DBus - Python bindings for DBus...
> OK, found.
>
> Checking for dependency: Python devel - Python development files...
> error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please
> make sure that this dependency is installed before installing or running
> HPLIP.
>
> Checking for dependency: Python libnotify - Python bindings for the
> libnotify Desktop notifications...
> OK, found.
>
> Checking for dependency: Python XML libraries...
> OK, found.
>
> Checking for dependency: Python 2.3 or greater - Required for fax
> functionality...
> OK, found.
>
> Checking for dependency: Python 2.2 or greater - Python programming
> language...
> OK, found.
>
> Checking for dependency: Reportlab - PDF library for Python...
> OK, found.
>
> Checking for dependency: SANE - Scanning library...
> OK, found.
>
> Checking for dependency: SANE - Scanning library development files...
> error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please
> make sure that this dependency is installed before installing or running
> HPLIP.
>
> Checking for dependency: scanimage - Shell scanning program...
> OK, found.
>
> Checking for dependency: xsane - Graphical scanner frontend for SANE...
> warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
> functionality may not function properly.
>
>
> ----------------------
> | HPLIP INSTALLATION |
> ----------------------
>
>
> Currently installed HPLIP version...
> HPLIP 3.11.1 currently installed in '/usr/share/hplip'.
>
> Current contents of '/etc/hp/hplip.conf' file:
> # hplip.conf. Generated from hplip.conf.in by configure.
>
> [hplip]
> version=3.11.1
>
> [dirs]
> home=/usr/share/hplip
> run=/var/run
> ppd=/usr/share/ppd/hplip/HP
> ppdbase=/usr/share/ppd/hplip
> doc=/usr/share/doc/hplip-doc/HTML
> icon=no
> cupsbackend=/usr/lib/cups/backend
> cupsfilter=/usr/lib/cups/filter
> drv=/usr/share/cups/drv
>
> # Following values are determined at configure time and cannot be changed.
> [configure]
> network-build=yes
> pp-build=yes
> gui-build=yes
> scanner-build=yes
> fax-build=yes
> dbus-build=yes
> cups11-build=no
> doc-build=yes
> shadow-build=no
> hpijs-install=yes
> foomatic-drv-install=yes
> foomatic-ppd-install=yes
> foomatic-rip-hplip-install=no
> hpcups-install=yes
> cups-drv-install=yes
> cups-ppd-install=no
> internal-tag=3.11.1.19
> restricted-build=no
> ui-toolkit=qt4
> qt3=no
> qt4=yes
> policy-kit=yes
> hpijs-only-build=no
> lite-build=no
> udev-acl-rules=yes
> hpcups-only-build=no
> hpijs-only-build=no
>
>
> Current contents of '/var/lib/hp/hplip.state' file:
> # hplip.state - HPLIP runtime persistent variables.
>
> [plugin]
> installed=0
> eula=0
>
>
>
> Current contents of '~/.hplip/hplip.conf' file:
> [installation]
> date_time = 11-07-16 11:06:00
> version = 3.11.1.19
>
>
>
> --------------------------
> | DISCOVERED USB DEVICES |
> --------------------------
>
> Device URI Model
> -------------------------------- ---------------------------
> hp:/usb/Deskjet_3050_J610_series HP Deskjet 3050 J610 series
> ?serial=CN0CH3B5WF05HX
> hp:/usb/PSC_1600_series?serial=M HP PSC 1600 series
> Y61OC126704GH
>
> ---------------------------------
> | INSTALLED CUPS PRINTER QUEUES |
> ---------------------------------
>
>
> Deskjet-3050-J610-series
> ------------------------
> Type: Printer
> Device URI: hp:/usb/Deskjet_3050_J610_series?serial=CN0CH3B5WF05HX
> PPD: /etc/cups/ppd/Deskjet-3050-J610-series.ppd
> PPD Description: HP Deskjet 3050 j610 Series, hpcups 3.11.1
> Printer status: printer Deskjet-3050-J610-series is idle. enabled since
> Fri 15 Jul 2011 07:01:59 PM EDT
> Communication status: Good
>
> PSC-1600-series
> ---------------
> Type: Printer
> Device URI: hp:/usb/PSC_1600_series?serial=MY61OC126704GH
> PPD: /etc/cups/ppd/PSC-1600-series.ppd
> PPD Description: HP PSC 1600 Series, hpcups 3.11.1
> Printer status: printer PSC-1600-series is idle. enabled since Fri 15 Jul
> 2011 07:15:47 PM EDT
> Communication status: Good
>
>
> ----------------------
> | SANE CONFIGURATION |
> ----------------------
>
> 'hpaio' in '/etc/sane.d/dll.conf'...
> 'hpaio' in '/etc/sane.d/dll.d/hplip'...
> OK, found. SANE backend 'hpaio' is properly set up.
>
> Checking output of 'scanimage -L'...
> device `hpaio:/usb/Deskjet_3050_J610_series?serial=CN0CH3B5WF05HX' is a
> Hewlett-Packard Deskjet_3050_J610_series all-in-one
> device `hpaio:/usb/PSC_1600_series?serial=MY61OC126704GH' is a
> Hewlett-Packard PSC_1600_series all-in-one
>
>
> ---------------------
> | PYTHON EXTENSIONS |
> ---------------------
>
> Checking 'cupsext' CUPS extension...
> OK, found.
>
> Checking 'pcardext' Photocard extension...
> OK, found.
>
> Checking 'hpmudext' I/O extension...
> OK, found.
>
> Checking 'scanext' SANE scanning extension...
> OK, found.
>
>
>
> -----------------
> | USB I/O SETUP |
> -----------------
>
> Checking for permissions of USB attached printers...
>
> HP Device 0x9311 at 002:011:
> Device URI: hp:/usb/Deskjet_3050_J610_series?serial=CN0CH3B5WF05HX
> Device node: /dev/bus/usb/002/011
> Mode: 0664
>
> HP Device 0x4811 at 002:010:
> Device URI: hp:/usb/PSC_1600_series?serial=MY61OC126704GH
> Device node: /dev/bus/usb/002/010
> Mode: 0664
>
> ---------------
> | USER GROUPS |
> ---------------
>
> mrc adm dialout cdrom plugdev lpadmin admin sambashare
>
> error: User needs to be member of group 'lp' to enable print, scan & fax.
> User member of group 'lpadmin'.
>
> -----------
> | SUMMARY |
> -----------
>
> error: 7 errors and/or warnings.
>
> Please refer to the installation instructions at:
> http://hplip.sourceforge.net/install/index.html
>
> Done.
>
> Any suggestions will be much appreciated.
>
> Michael Coady
>
> --
> You received this question notification because you asked the question.
>

Revision history for this message
Best Srikanth (srikanth-lokare) said :
#2

Hi Michael,

Glad to know that your problem is solved. Can you please go ahead and change the status to solved. Please let us know if you need any help related to HPLIP.

Thanks and Regards,
Srikanth Lokare

Revision history for this message
michael coady (mrccoady) said :
#3

Thanks Srikanth, that solved my question.