I can't get my Officejet 6500 Wireless E709n to connect wirelessly
I am using Linux Mint 11, which is based off of Ubuntu 11.04. I have an HP Officejet 6500 Wireless E709n, and it works perfectly with wireless on my Windows computer. I can print fine when it's plugged in, but when I'm on wireless, in the Device Manager, I refresh and it says:
HPLIP Device Status
Officejet_
Device communication error (5012)
And it shows a busy symbol. I am unable to print or scan. The page on the printer says everything works with Linux, and when I set it up it says you can now unplug the usb. I have retried the setup 3 times.
Question information
- Language:
- English Edit question
- Status:
- Solved
- For:
- HPLIP Edit question
- Assignee:
- No assignee Edit question
- Solved by:
- Srikanth
- Solved:
- Last query:
- Last reply:
Revision history for this message
|
#1 |
I went to printer control and clicked start printer, because it was set to stopped, and it said it is started/idle, with a green orb next to it. When I attempt to print it says Started a print job: (Document title) and then Print job has completed: (Document title) but it never actually prints.
Revision history for this message
|
#2 |
When I have the device selected in the Device Manager, on the bottom of the window, it says: hp:/usb/
Revision history for this message
|
#3 |
I've tried printing pictures, documents, text files, and pdf's, and none work. After it says done printing, it says device is busy.
Revision history for this message
|
#4 |
Hi Mark,
Can you please run "hp-check -t" from the terminal and post the complete output here.
Thanks and Regards,
Srikanth Lokare
Revision history for this message
|
#5 |
Hi,
Can you please tell me the HPLIP version installed in your machine? Post the result of command 'hp-check -t' here.
Thanks and Regards
Ani Balakrishnan
Revision history for this message
|
#6 |
mark@mark-dell ~ $ hp-check -t
HP Linux Imaging and Printing System (ver. 3.11.1)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball
has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode
will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux mark-dell 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:50 UTC 2011 i686 i686 i386 GNU/Linux
Distribution:
linuxmint 11
Checking Python version...
OK, version 2.7.1 installed
Checking PyQt 4.x version...
OK, version 4.8.3 installed.
Checking for CUPS...
Status: scheduler is running
warning: Version: (cups-config) Not available. Unable to determine installed version of CUPS.)
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.1
-------
| COMPILE AND RUNTIME DEPENDENCIES |
-------
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
Checking for dependency: CUPS devel- Common Unix Printing System development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: CUPS image - CUPS image development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: DBus - Message bus system...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libjpeg - JPEG library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: libusb - USB library...
error: NOT FOUND! This is a REQUIRED dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
error: NOT FOUND! This is a REQUIRED/COMPILE TIME ONLY dependency. Please make sure that this dependency is installed before installing or running HPLIP.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP functionality may not function properly.
-------
| HPLIP INSTALLATION |
-------
Currently installed HPLIP version...
HPLIP 3.11.1 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.1
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=no
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
Current contents of '/var/lib/
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/
[settings]
systray_visible = 0
systray_messages = 0
[last_used]
device_uri = "hpfax:
printer_name =
working_dir = .
[commands]
scan = /usr/bin/
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
[installation]
date_time = 05/17/2011 14:17:18
version = 3.11.1.19
-------
| DISCOVERED USB DEVICES |
-------
No devices found.
-------
| INSTALLED CUPS PRINTER QUEUES |
-------
Officejet-
-------
Type: Printer
Device URI: hp:/usb/
PPD: /etc/cups/
PPD Description: HP Officejet 6500 e709n, hpcups 3.11.1
Printer status: printer Officejet-
error: Unable to communicate with device (code=12): hp:/usb/
error: Device not found
error: Communication status: Failed
Officejet-
-------
Type: Fax
Device URI: hpfax:/
PPD: /etc/cups/
PPD Description: HP Fax hpcups
Printer status: printer Officejet-
error: Unable to communicate with device (code=12): hpfax:/
error: Device not found
error: Communication status: Failed
-------
| SANE CONFIGURATION |
-------
'hpaio' in '/etc/sane.
'hpaio' in '/etc/sane.
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
-------
| PYTHON EXTENSIONS |
-------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
---------------
| USER GROUPS |
---------------
mark adm dialout cdrom plugdev lpadmin admin sambashare
error: User needs to be member of group 'lp' to enable print, scan & fax.
User member of group 'lpadmin'.
-----------
| SUMMARY |
-----------
error: 14 errors and/or warnings.
Please refer to the installation instructions at:
http://
Done.
Revision history for this message
|
#7 |
I added myself to the group "lp" and it still says the same thing in USER GROUPS
Revision history for this message
|
#8 |
Hi Mark,
From the log, we could make out that there are so many required dependencies missing. Can you please try this with latest HPLIP (3.11.5) Release. You can download the same from http://
Thanks for using HPLIP.
Thanks and Regards,
Srikanth Lokare
Revision history for this message
|
#9 |
I can't run the installer for it, it says missing dependencies and it can't install them, and I couldn't find a download for one of them, so I still can't install it.
Revision history for this message
|
#10 |
Hi Mark,
Please follow the below steps before installing the latest HPLIP 3.115 release
1. Go to System -> Administrator -> Synaptic Package Manager
2. Go to Settings Menu -> Repositories
3. Select all the "Check Box" under "Download from Internet" option.
4. Select "Main Server" at "Download From" combo box.
5. Click on Close button and close the Synaptic Package Manager.
6. Now try to Install the latest HPLIP release.
Please let us know on the same.
Thanks and Regards,
Srikanth Lokare
Revision history for this message
|
#11 |
I got the installer to run correctly, but it can't configure the wireless now.
Revision history for this message
|
#12 |
Hi Mark,
Please follow the following steps to configure the device on wireless setup.
1. Plug in the HP OfficeJet 6500 printer to PC via USB.
2. Execute "hp-setup" to setup device.
3. Select "Wireless/
4. Click "Next" button on "Wireless (Wifi/802.11) Configuration" screen.
5. The device HP OfficeJet 6500... is listed in "Select From Discovered Wireless..." screen, then click "Next".
6. Click on the appropriate Network Name from the list displayed in the "Fine and Select a Wireless Network" window and click Next button.
7. Note down the IP Adress from the "Wireless Configuration Results" window and click on the Finish button.
8. Now select "Network/
9. Click on the "Show Advanced option" button.
10. Select "Manual Discovery" check-box.
11. Enter the IP Adress noted and click on the Next button.
12. Continue the setup complete the configuration.
After completing the configuration, please remove the USB connection. Please let us know if the problem still persists.
Thanks for using HPLIP.
Thanks and Regards,
Srikanth Lokare
Revision history for this message
|
#13 |
Thanks Srikanth, that solved my question.
Revision history for this message
|
#14 |
Hi:
I was browsing through the boards and saw this message. I have the same problem as Mark was having. I followed Srikanth's instructions in his last message and got my wireless working it appears. However, when I print the status of the job says "Held." It won't go to the printer. Printer status says the printer is "Ready." Any ideas????
Thanks in advance,
Scott
Revision history for this message
|
#15 |
I should also add that I don't get any errors from hp-setup. I have two different HP printers installed, but they should be using different queues. I am only having problems with the HP 6500 Wireless. Here's an output from hp-check -t:
---------------
hp-check[2051]: info: :
Initializing. Please wait...
Ubuntu
11.10
scheduler is running
1.5.0
Linux parley 3.0.0-13-generic #22-Ubuntu SMP Wed Nov 2 13:27:26 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
hp-check[2051]: info: :
hp-check[2051]: info: :---------------
hp-check[2051]: info: :| SYSTEM INFO |
hp-check[2051]: info: :---------------
hp-check[2051]: info: :
hp-check[2051]: info: :Basic system information:
hp-check[2051]: info: :Linux parley 3.0.0-13-generic #22-Ubuntu SMP Wed Nov 2 13:27:26 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux
hp-check[2051]: info: :
hp-check[2051]: info: :Distribution:
hp-check[2051]: info: :ubuntu 11.10
hp-check[2051]: info: :
hp-check[2051]: info: :Checking Python version...
hp-check[2051]: info: :OK, version 2.7.2 installed
hp-check[2051]: info: :
hp-check[2051]: info: :Checking PyQt 4.x version...
hp-check[2051]: info: :OK, version 4.8.5 installed.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for CUPS...
hp-check[2051]: info: :Status: scheduler is running
hp-check[2051]: info: :Version: 1.5.0
hp-check[2051]: info: :error_log is set to level: warn
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dbus/python-dbus...
hp-check[2051]: info: :dbus daemon is running.
hp-check[2051]: info: :python-dbus version: 0.84.0
hp-check[2051]: info: :
hp-check[2051]: info: :
hp-check[2051]: info: :------
hp-check[2051]: info: :| COMPILE AND RUNTIME DEPENDENCIES |
hp-check[2051]: info: :------
hp-check[2051]: info: :
note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: CUPS - Common Unix Printing System...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: CUPS devel- Common Unix Printing System development files...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: CUPS image - CUPS image development files...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: DBus - Message bus system...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: gcc - GNU Project C and C++ Compiler...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: libcrypto - OpenSSL cryptographic library...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: libjpeg - JPEG library...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: libpthread - POSIX threads library...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: libtool - Library building support services...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: libusb - USB library...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: make - GNU make utility to maintain groups of programs...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: PolicyKit - Administrative policy framework...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: Python DBus - Python bindings for DBus...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: Python devel - Python development files...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: Python XML libraries...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: Python 2.3 or greater - Required for fax functionality...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: Python 2.2 or greater - Python programming language...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: Reportlab - PDF library for Python...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: SANE - Scanning library...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: SANE - Scanning library development files...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: scanimage - Shell scanning program...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking for dependency: xsane - Graphical scanner frontend for SANE...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :
hp-check[2051]: info: :------
hp-check[2051]: info: :| HPLIP INSTALLATION |
hp-check[2051]: info: :------
hp-check[2051]: info: :
hp-check[2051]: info: :
hp-check[2051]: info: :Currently installed HPLIP version...
hp-check[2051]: info: :HPLIP 3.11.1 currently installed in '/usr/share/hplip'.
hp-check[2051]: info: :
hp-check[2051]: info: :Current contents of '/etc/hp/
hp-check[2051]: info: :# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.11.1
[dirs]
home=/usr/
run=/var/run
ppd=/usr/
ppdbase=
doc=/usr/
icon=/usr/
cupsbackend=
cupsfilter=
drv=/usr/
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-
foomatic-
foomatic-
hpcups-install=yes
cups-drv-
cups-ppd-install=no
internal-
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-
hpijs-only-build=no
hp-check[2051]: info: :
hp-check[2051]: info: :Current contents of '/var/lib/
hp-check[2051]: info: :# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
hp-check[2051]: info: :
hp-check[2051]: info: :Current contents of '~/.hplip/
hp-check[2051]: info: :[last_used]
device_uri = hp:/net/
printer_name = HP-Photosmart-
working_dir = .
[installation]
date_time = 12/03/2011 22:19:40
version = 3.11.1.19
[settings]
systray_visible = 0
systray_messages = 0
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[refresh]
rate = 30
enable = false
type = 1
[polling]
enable = false
interval = 5
device_list =
[fax]
voice_phone =
email_address =
hp-check[2051]: info: :
hp-check[2051]: info: :------
hp-check[2051]: info: :| DISCOVERED USB DEVICES |
hp-check[2051]: info: :------
hp-check[2051]: info: :
hp-check[2051]: info: :No devices found.
hp-check[2051]: info: :
hp-check[2051]: info: :------
hp-check[2051]: info: :| INSTALLED CUPS PRINTER QUEUES |
hp-check[2051]: info: :------
hp-check[2051]: info: :
hp-check[2051]: info: :
hp-check[2051]: info: :HP-Photosmart-
hp-check[2051]: info: :------
hp-check[2051]: info: :Type: Printer
hp-check[2051]: info: :Device URI: hp:/net/
hp-check[2051]: info: :PPD: /etc/cups/
hp-check[2051]: info: :PPD Description: HP Photosmart Plus b210 Series hpijs, 3.11.1
hp-check[2051]: info: :Printer status: printer HP-Photosmart-
hp-check[2051]: info: :Communication status: Good
hp-check[2051]: info: :
hp-check[2051]: info: :Officejet_
hp-check[2051]: info: :------
hp-check[2051]: info: :Type: Printer
hp-check[2051]: info: :Device URI: hp:/net/
hp-check[2051]: info: :PPD: /etc/cups/
hp-check[2051]: info: :PPD Description: HP Officejet 6500 e709n, hpcups 3.11.1
hp-check[2051]: info: :Printer status: printer Officejet_
hp-check[2051]: info: :Communication status: Good
hp-check[2051]: info: :
hp-check[2051]: info: :
hp-check[2051]: info: :------
hp-check[2051]: info: :| SANE CONFIGURATION |
hp-check[2051]: info: :------
hp-check[2051]: info: :
hp-check[2051]: info: :'hpaio' in '/etc/sane.
hp-check[2051]: info: :OK, found. SANE backend 'hpaio' is properly set up.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking output of 'scanimage -L'...
hp-check[2051]: info: :
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
hp-check[2051]: info: :
hp-check[2051]: info: :------
hp-check[2051]: info: :| PYTHON EXTENSIONS |
hp-check[2051]: info: :------
hp-check[2051]: info: :
hp-check[2051]: info: :Checking 'cupsext' CUPS extension...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking 'pcardext' Photocard extension...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking 'hpmudext' I/O extension...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :Checking 'scanext' SANE scanning extension...
hp-check[2051]: info: :OK, found.
hp-check[2051]: info: :
hp-check[2051]: info: :
hp-check[2051]: info: :
hp-check[2051]: info: :---------------
hp-check[2051]: info: :| USER GROUPS |
hp-check[2051]: info: :---------------
hp-check[2051]: info: :
hp-check[2051]: info: :scott adm lp dialout cdrom plugdev lpadmin admin sambashare
hp-check[2051]: info: :
hp-check[2051]: info: :-----------
hp-check[2051]: info: :| SUMMARY |
hp-check[2051]: info: :-----------
hp-check[2051]: info: :
hp-check[2051]: info: :No errors or warnings.
hp-check[2051]: info: :
hp-check[2051]: info: :Done.
-----------
Oh one last thing...I installed HPLIP 3.11.1 rather than 3.11.10 b/c 3.11.10 wasn't working on my system at the time. I read another thread where a guy got 3.11.1 to work. BTW - I am running Ubuntu 11.10.
Any help appreciated guys. Thanks.