HPLIP

Can't Instal printer НР P1102w use WI-FI

Asked by didiloooge

1. Ubuntu 10.04.
2. HP_LaserJet_Professional_P1102w.
3. run 'hp-check -t'

root@laptopol:/home/oleg# hp-check -t

HP Linux Imaging and Printing System (ver. 3.10.6)
Dependency/Version Check Utility ver. 14.3

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies
are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has
the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will
check both of the above cases (both compile- and run-time dependencies).

Saving output in log file: hp-check.log

Initializing. Please wait...

---------------
| SYSTEM INFO |
---------------

Basic system information:
Linux laptopol 2.6.32-25-generic #43-Ubuntu SMP Wed Sep 1 09:46:39 UTC 2010 i686 GNU/Linux

Distribution:
ubuntu 10.04

Checking Python version...
OK, version 2.6.5 installed

Checking PyQt 4.x version...
OK, version 4.7.3 installed.

Checking for CUPS...
Status: планировщик запущен
Version: 1.4.3
error_log is set to level: warn

Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0

------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------

note: To check for compile-time only dependencies, re-run hp-check with the -c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r parameter (ie, hp-check -r).

Checking for dependency: CUPS - Common Unix Printing System...
OK, found.

Checking for dependency: CUPS devel- Common Unix Printing System development files...
OK, found.

Checking for dependency: CUPS image - CUPS image development files...
OK, found.

Checking for dependency: DBus - Message bus system...
OK, found.

Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.

Checking for dependency: GhostScript - PostScript and PDF language interpreter and previewer...
OK, found.

Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.

Checking for dependency: libjpeg - JPEG library...
OK, found.

Checking for dependency: libnetsnmp-devel - SNMP networking library development files...
OK, found.

Checking for dependency: libpthread - POSIX threads library...
OK, found.

Checking for dependency: libtool - Library building support services...
OK, found.

Checking for dependency: libusb - USB library...
OK, found.

Checking for dependency: make - GNU make utility to maintain groups of programs...
OK, found.

Checking for dependency: PIL - Python Imaging Library (required for commandline scanning with hp-scan)...
OK, found.

Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.

Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.

Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.

Checking for dependency: Python devel - Python development files...
OK, found.

Checking for dependency: Python libnotify - Python bindings for the libnotify Desktop notifications...
OK, found.

Checking for dependency: Python XML libraries...
OK, found.

Checking for dependency: Python 2.3 or greater - Required for fax functionality...
OK, found.

Checking for dependency: Python 2.2 or greater - Python programming language...
OK, found.

Checking for dependency: Reportlab - PDF library for Python...
OK, found.

Checking for dependency: SANE - Scanning library...
OK, found.

Checking for dependency: SANE - Scanning library development files...
OK, found.

Checking for dependency: scanimage - Shell scanning program...
OK, found.

Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.

----------------------
| HPLIP INSTALLATION |
----------------------

Currently installed HPLIP version...
HPLIP 3.10.6 currently installed in '/usr/share/hplip'.

Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.

[hplip]
version=3.10.6

[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.10.6
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp

# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=no
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.10.6.15
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=no
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
hpcups-only-build=no
hpijs-only-build=no

Current contents of '/var/lib/hp/hplip.state' file:
[plugin]
eula = 1
installed = 1

Current contents of '~/.hplip/hplip.conf' file:
error: Could not access file: Нет такого файла или каталога

--------------------------
| DISCOVERED USB DEVICES |
--------------------------

  Device URI Model
  -------------------------------- -------------------------------
  hp:/usb/HP_LaserJet_Professional HP LaserJet Professional P1102w
  _P1102w?serial=000000000Q915NHZP
  R1a

---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------

Canon-BJC-250
-------------
Type: Unknown
Device URI: usb://Canon/BJC-250
PPD: /etc/cups/ppd/Canon-BJC-250.ppd
PPD Description: Canon BJC-250 Foomatic/bjc250gs
Printer status: принтер Canon-BJC-250 отключен с момента Вск 12 Сен 2010 18:09:53 - Unplugged or turned off
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

Canon-MF4320-4350-(UFRII-LT)
----------------------------
Type: Unknown
Device URI: usb://Canon/MF4320-4350%20(UFRII%20LT)
PPD: /etc/cups/ppd/Canon-MF4320-4350-(UFRII-LT).ppd
PPD Description: Canon MF4320-4350 ver.2.0
Printer status: принтер Canon-MF4320-4350-(UFRII-LT) отключен с момента Вск 05 Сен 2010 07Unplugged or turned off
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend to function in HPLIP.

HP_LaserJet_Professional_P1102w
-------------------------------
Type: Printer
Device URI: hp:/usb/HP_LaserJet_Professional_P1102w?serial=000000000Q915NHZPR1a
PPD: /etc/cups/ppd/HP_LaserJet_Professional_P1102w.ppd
PPD Description: HP LaserJet Professional p1102w, hpcups 3.10.6, requires proprietary plugin
Printer status: принтер HP_LaserJet_Professional_P1102w свободен. Включен с момента Чтв 16 Сен 2010 13:15:01
Required plug-in status: Installed
Communication status: Good

----------------------
| SANE CONFIGURATION |
----------------------

'hpaio' in '/etc/sane.d/dll.conf'...
OK, found. SANE backend 'hpaio' is properly set up.

Checking output of 'scanimage -L'...

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

---------------------
| PYTHON EXTENSIONS |
---------------------

Checking 'cupsext' CUPS extension...
OK, found.

Checking 'pcardext' Photocard extension...
OK, found.

Checking 'hpmudext' I/O extension...
OK, found.

Checking 'scanext' SANE scanning extension...
OK, found.

-----------------
| USB I/O SETUP |
-----------------

Checking for permissions of USB attached printers...

HP Device 0x32a at 002:013:
    Device URI: hp:/usb/HP_LaserJet_Professional_P1102w?serial=000000000Q915NHZPR1a
    Device node: /dev/bus/usb/002/013
    Mode: 0664

---------------
| USER GROUPS |
---------------

root

-----------
| SUMMARY |
-----------

error: 2 errors and/or warnings.

Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html

Done.

4. run 'hp-setup'

root@laptopol:/home/oleg# hp-setup

HP Linux Imaging and Printing System (ver. 3.10.6)
Printer/Fax Setup Utility ver. 9.0

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Searching on USB bus...
error: No devices found on bus: usb
Searching... (bus=net, timeout=5, ttl=4, search=(None) desc=0, method=mdns)
error: No devices found on bus: net

Done.

5. Help me please connect to printer use WI-FI !

Question information

Language:
English Edit question
Status:
Answered
For:
HPLIP Edit question
Assignee:
No assignee Edit question
Last query:
Last reply:
Revision history for this message
delance (olivier-delance) said : 		#1

Can you confirm:
   printer works on USB
   PC WIFI works with other devices (like Internet Box)

Revision history for this message
Naga Samrat Chowdary, Narla (samrat-hplip) said : 		#2

please open file /usr/share/hplip/data/models/models.dat file as root user.
search for string HP_LaserJet_Professional_P1102w.
set wifi-config=1 for this section, and save file.

now run hp-wificonfig to configure printer with router.
identify ip address of printer at the end of hp-wificonfig setup.
once printer got ip address assigned by wireless router, ping this ip address from printer.

then add printer by hp-setup ip-address-of-printer.

Thanks,
Naga Samrat Chowdary, Narla

Revision history for this message
didiloooge (333kiev) said : 		#3

"printer works on USB" ---NO
"PC WIFI works with other devices (like Internet Box)" ---NO

Revision history for this message
didiloooge (333kiev) said : 		#4

after

         "open file /usr/share/hplip/data/models/models.dat file as root user.
          search for string HP_LaserJet_Professional_P1102w.
          set wifi-config=1 for this section, and save file.
           run hp-wificonfig to configure printer with router."

I have

"oleg@laptopol:~$ hp-wificonfig

HP Linux Imaging and Printing System (ver. 3.10.6)
Wifi Configuration Utility ver. 1.1

Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

(<unknown>:21209): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(<unknown>:21209): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(<unknown>:21209): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(<unknown>:21209): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(<unknown>:21209): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(<unknown>:21209): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed

(<unknown>:21209): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(<unknown>:21209): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
Searching on USB bus...
error: No devices found on bus: usb"

Help me please!

Revision history for this message
Srikanth (srikanth-lokare) said : 		#5

Hi Didilooge,

It is a bug with our HPLIP. It is already there in our ToDo list. We will let you know once it is fixed.

Sorry for the inconvenience.

Thanks and Regards,
Srikanth Lokare

Revision history for this message
sleepy (sleepy) said : 		#6

I think I have the same problem with HP_LaserJet_Professional_P1102w.
I tried Ubuntu 10.04 and 11.04, hplip versions 3.11.7, 3.11.10, 3.11.1-2ubuntu2.

$ lsusb
...
Bus 001 Device 005: ID 03f0:032a Hewlett-Packard
...

$ hp-setup
...
Searching... (bus=usb, search=(None), desc=0)
error: No devices found on bus: usb
...

Syslog says:
---
Oct 10 20:17:00 robocycleta kernel: [ 4094.532173] usb 1-1.5: new high speed USB device using ehci_hcd and address 6
Oct 10 20:17:00 robocycleta kernel: [ 4094.645021] scsi11 : usb-storage 1-1.5:1.0
Oct 10 20:17:00 robocycleta hp-mkuri: io/hpmud/model.c 625: unable to find [hp_laserjet_professional_p1102w] support-type in /usr/share/hplip/data/models/models.dat
Oct 10 20:17:00 robocycleta hp-mkuri: io/hpmud/model.c 625: unable to find [hp_laserjet_professional_p1102w] support-type in /usr/share/hplip/data/models/models.dat
Oct 10 20:17:01 robocycleta kernel: [ 4095.646612] scsi 11:0:0:0: CD-ROM HP Smart Install 1.0 PQ: 0 ANSI: 2
Oct 10 20:17:01 robocycleta kernel: [ 4095.676454] sr1: scsi3-mmc drive: 0x/0x caddy
Oct 10 20:17:01 robocycleta kernel: [ 4095.676663] sr 11:0:0:0: Attached scsi CD-ROM sr1
Oct 10 20:17:01 robocycleta kernel: [ 4095.676816] sr 11:0:0:0: Attached scsi generic sg3 type 5
Oct 10 20:17:48 robocycleta hp-setup: hp-setup[4279]: error: No devices found on bus: usb
---

The message in model.c:625 persists even with upgrade of Ubuntu 10.04->11.04.
/usr/share/hplip/data/models/models.dat contains the entry "[hp_laserjet_professional_p1102w]", support-type=1.

For current Ubuntu hplip version (3.11.1-2ubuntu2) I also cannot download the plugin (the site is down: http://www.openprinting.org/download/printdriver/auxfiles/HP/plugins/hplip-3.11.1-plugin.run - This site is down for maintenance. We will be restoring service shortly. Thank you for your patience.) But absense of plugin does not influence the message with usb.

I managed to have my printer working twice, but both times this lasted until reboot! Afterwards it was gone, hp found usb no longer.

Can you help with this problem?

Provide an answer of your own, or ask didiloooge for more information if necessary.

To post a message you must log in.